Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.1 LAccepted-AOC 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹48.5 L+₹7.2 L (17.5%)Rejected-Finance T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L2 | Rejected-Finance Being other than Lowest Tenderer | |
| 3 | L3₹50.8 L+₹9.4 L (22.9%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L3 | Rejected-Finance Being other than Lowest Tenderer | |
| 4 | L4₹53.2 L+₹11.9 L (28.7%)Rejected-Finance | L4 | Rejected-Finance Being other than Lowest Tenderer |
Tender Value
₹65 L
EMD Value
₹1.3 L
Closing Date
14 Jun 2023, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Ng Rajesh Singh GE NW KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8957 REPAIR MAINT TO CERTAIN BLDGS UNDER ZONE 3 AT NAVAL DOCKYARD MUMBAI UNDER AGE BR I UNDER GE NW KUNJALI
2023_MES_596676_1
8957/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) KUNJALI
ALL AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) KUNJALI
₹1.3 L
Yes
21 Oct 2023
19 May 2023
16 Jun 2023
26 May 2023
14 Jun 2023
31 May 2023
19 May 2023 - 26 May 2023
Amount
Taking up or down existing GI water tubing complete with all fittings of 15 mm bore. All as specified and directed.
Taking up or down existing GI water tubing complete with all fittings of 20 mm bore
Taking up or down existing GI water tubing complete with all fittings of 25 to 32 mm bore. All as specified and directed.
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 25 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.
S&F in repairs rotational moulded polythene water storage tank of 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge..
S&F in repairs rotational moulded polythene water storage tank of 2000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge.
S&F in repairs rotational moulded polythene water storage tank of 5000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge..
S&F in repairs rotational moulded polythylene water storage loft tank tank of 375 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.
S&F in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and as directed by Engr-in-Charge.
S&F in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outlet etc complete all as specified and as directed by Engr-in-Charge.
M&L for 32mm dia waste coupling, PTMT for glazed ware sinks, basin, etc with long shanks and fly, flange end.complete all as specified and as directed by Engr-in-Charge.
S&F PVC connection on pipe 450mm long with brass nut bolt complete all as specified and as directed by Engr-in-Charge.
S&F PVC waste pipe 32mm dia 800mm long with socket suitable for WHB/Sink/urinal complete all as specified and as directed by Engr-in-Charge.
S&F push taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm dia iron pipe or for brass ferrule and fixed in repairs. All as specified and directed.
S&F vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and padestal complete as fixed in repair.
S&F in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes all as specified and directed.
S&F in repairs water closet squatting pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).
S&F in repairs vitreous china wash down water closet pan coloured (pedestal pattern) including plastic sheet cover with nuts and bolts etc all as specified and directed.
S&F in repairs 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe complete all as specified.
S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Charge.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)
S&F in repirs 160 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, ceilings or in floor etc with and including fixing clips bends elbow, shoes bends etc (Note :- Measurement shall be taken along the centre line of the pipes) complete all as specified and as directed.
S&F in repairs 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor including fixing clips, bends, elbows, shoes etc complete all as specified and as directed.
S &F in repairs 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed.
S&F for PVC (SWR) bends any radius 160mm bore complete all as specified and as directed .
S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.
S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed by Engr-in-Charge.
Taking down cement plaster of any description on brick, stone or concrete surfaces of walls including raking out joints, hacking for key, scrubbing down with water upto G Plus 9th floor of bldg incl scaffolding complete all as specified and directed.
M&L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed.
M&L for rendering 10 mm thick pre polymer modified ready mixed cement based plaster on chajja top and soffits Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required upto G plus 3rd floor bldg complete all as specified and directed.
M&L for Rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 with using WPC @3% by weight of cement finished even and smooth without using extra cement all as specified. Note : WPC will be measured and paid separately.
M&L for Rendering 20mm thick on fair faces of brick work or concrete surface with two coats i.e. (15mm thick back coat in CM (1:6 and 5 mm thick finish coat in cement mortar 1:4 ) with using WPC @3% by weight of cemen finished even and smooth without using extra cement including all safety measure and scaffolding upto any height. All as specified and directed. Note : WPC will be measured and paid separately.
M&L for Rendering 5mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 with using WPC @3% by weight of cemenwith using WPC @3% by weight of cemen finished even and smooth without using extra cement all as specified. Note : WPC will be measured and paid separately.
Supply only integral water proofing compound.
M & L for New treatment/Old of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding upto G+9 storey of bldg complete all as specified and directed by Engr-in-Charge.
Complete removal of existing treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof including preparation of newly plaster surface and necessary scaffolding upto G plus 9th floor of bldg complete all as specified and directed. (Make Ultima)
M&L for New plastered surfaces of wall/ceiling preparation and applying two coat of oil bound distemper over a coat of 1 to 2 mm thick wall care putty (JK/Birla ) and primer complete all as specified and directed.
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets.
M&L for POP false ceiling using 600 x 900 x 12 mm thick using plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre, secondary joist of size 75x20 mm fixed to main joists spaced t 900 mm suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern all as specified and directed by Engr-in-Charge.
M&L for false ceiling made out of 600 x 600 x 4 to 6 mm thick ceiling board/tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50 x 40 x 0.63 mm and cross tee of size 23.50x23.50x0.63 mm and angle size 19x19x0.63 mm including 3 mm GI wire for suspending bolts necessary washers nut/cleats/pin hook etc for securing frame work to ceiling to the snap grid including provn of necessary holes/cutting for providing light/far as required including making necessary recesses/projected pattern complete all as spoecified and as directed.
S&F Medium density fibre board, 12 mm thick exterior grade, fixed to timber/Aluminium framework with screws. All as specified and directed.
M&L for Plywood, 12 mm thick grade BWP, type BB, fixed with screws to timber frame work. All as specified and directed.
M&L for 0.9 MM thick sunmica decorative texture finish laminated type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions. All as specified and directed.
S&F aluminium window, doors with shutters / frames / partitions made out of extruded powder coasted aluminium sections, with sliding or openable shutters including frame & necessary joining cleats, glazing clip, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts hooks and eyes, peg syays and handles including connected items, with and including, making good to the disturbed portion with its original specification, complete all as specified and directed.
S&F in repair 3 mm thick Aluminium Composite panel cladding plain metallic of approved colour/shade to beam/column/slab in circular/rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour complete all as specified and as directed.
Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.
M&L for 4 mm thick plain glass sheets ordinary quality in squares n.exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.
S&F 8 to 12mm thick, toughened glass for door shutters, partitions, shelves etc with and including fitting and fixtures such as glass handles studs, fittings for door pivots etc complete all as specified and directed by Engr-in-Charge.
S & F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers
S & F in repairs for aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified and as directed by Engr-in-Charge.
Taking down chowkats or frames n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)
M & L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed.
S&F factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze complete all as specified and as directed
S&F 40mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and as directed .
S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) in opening as per specifiecation and drawings.
S&F 30 mm thick Rajshri brand factory made moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement/eynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 Kg/Cbm manufactured by an ISO - 9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel 5mm plain /prelam PVC sheet to be pasted using solvent cement /eynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton (made by sticking 2 Nos foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos ) thick PVC sheet to be given for lock provision at lock height . Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 20 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.
S&F Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats. All as specified and directed.
S&F mild steel flat iron 25 x 3 mm such as in hold fast etc or similar small articles conforming to Fe- 410-0 or 310-0. Complete all as specified and as directed by Engr-in-Charge.
S&F in repairs for 100mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type C-21 etc complete all as specified and directed by Engr-in-charge.
ditto all as per item No. 65 above but 75 mm in size
S & F in repairs extruded aluminium alloy handles fabricated type anodized 150 mm size complete all as specified and as directed by Engr-in-Charge. .
S&F in repair 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.
S&F in repair150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.
S&F in repairs 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy a complete all as specified and directed.
S&F in repair 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed
S&F 200mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.
S&F 150 mm long brass barrel tower bolts of extruded sections as fixed in repairs complete all as specified and directed.
S&F in repairs for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed
S&F in repair for 140mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed
S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and as directed.
S&F in repair 2 mm thick bekelite sheet with decorative choice laminated on both side completion as specified and as directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rubbish of the premises.
M&L for (450mm x300mm x 7mm or 600x300x7mm) thick coloured glazed ceramic tiles as in dado/vertical services set and jointed in neat cement slurry and pointed in coloured cement to match the surface incl 10 mm thick backing coat in cm 1:4 complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.
S&F pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coated GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.
Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness all as specified and directed.
M&L for 20 mm thick Granite (of any type) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (colour of granite will be decided by the GE/Engr-in-Charge).
M&L for 20 mm thick granite stone slab maching cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed. (colour of granite will be decided by the GE/Engr-in-Charge).
M &L for machine cut kota stone slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.
S & F in repairs Roller venetion blinds type made out of standard cloth of approved texture with necessary accessories etc complete
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as specified and directed.
M & L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed by EIC.
All as per Item No 95 above but MS Plate (Plain or Chequred).
S&F for rolled mild steel sections of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc. all as specified and directed.
S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; walk ways, railings, frame work for water tanks and similar work conforming to Fe 290 Gd E-165 all as specified .
Demolition of brick/stone masonry built in CM. all as specified.
M&L for brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.
M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4.
M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in floor finished even and fair all as specified.
M & L for Providing, cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges. All as specified and directed.
S&F concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed.
S & F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed by Engr-in-Charge.
S&F vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and padestal complete as fixed in repair.
S&F in repairs 15 mm bore dia of pipe, brass chromium plated fancy type bib tap .complete all as specified and directed by Engr-in-Charge.
S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle handle screwed both ends.complete all as specified and directed by Engr-in-Charge.
M&L for preparation and applying two coat of floor/Roof paint (Make-Indigo Floor paint). All as specified and directed.
S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.
M&L in repairs for viterous china urinal partition white of size 310 x 700mm urinal partions slabs, terminating about 40cm above floor, fixed in repairs complete all as specified and directed.
S&F aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & fixed in repairs complete all as specified and directed.
M&L for machine pressed chequered cement tiles coloured of size 250mmx250mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and direcetd.
M&L for 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm graded stone agg) as in sub base.
M&L 100 mm thick cement concrete type B-1 , 1:2:4 (20 mm graded stone agg) as in hardstanding laid in alternate panel all as specified.
M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .
M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .
M&L for preparation of New steel surfaces of any description over 10cm width or girth and applying Two coat of synthetic enamel paint over a coat of red oxide primer. All as specified and directed.
Shetty Construction Co
Nilesh Construction
jalandhara construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .