89/EUDC-VI/LESA T.G./2023-24

Amount

Safe Loading carriage & unloading of following material from central store to JE Store/work site.

ST pole 11/9 mtr.

PCC Pole 8.5 mtr long.

11/0.4 KV 400KVA T/F.

11/0.4 KV 630KVA T/F.

LT Cable 1x240//630/ 400 sqmm.

11KV XLPE Cable 3x70 sqmm.

11KV XLPE Cable 3x120 sqmm.

11KV XLPE Cable 3x120/70 sqmm Termination Kit.

ACSR Racoon conductor.

11KV Pin Insulator.

11KV GI Pin.

11KV Disc Insulator.

11KV Disc Fitting.

Gi wire.

Earthing rod.

ABC Cable 3x120/95/50/25sqmm.

Stay set complete.

Stay wire.

11KV V-type x-arm.

3 phase distribution box.

Safe Carriage of 9/11 Mtr ST pole/PCC Pole from Dump site to pit site.

Errection 11/9 mtr ST Pole/pcc pole by digging pit upto 1/6 depth of pole errection of pole refilling of earth and proper ramming Binding of 11KV Line/LT accessories.

Laying of LT Cable 1x240/400/630 sqmm with suitable size of Al lug all material provide by department.

Hoisting of LT Cable on pole through GI Pipe requied size clamping on pole only cable provided by department.

Proper Jumpering of LT Cable on O/H Line.

Prepare proper space for construction of plinth.

Construction of T/F plinth of size 2x2x1.2 Mtr with first class bricks and massonary work in the ratio 1:4cement and course sand fiiling of structure completely as per norms with RCC Top 1:2:2 cement sand and course sand stone gritt with MS bar and MS chaanel for resting of T/F.All material provide by contractor exept T/F.

Fabrication and fixing of wiremesh fencing around the11/0.4KV T/F and DP Box made as per require-ment 2mtr height 45x45x5 mm angle frame and 1 No horizontal runner by 40x5 mm MS flat then welding of wiremesh on it 50x25mm made of 12 SWG ,diagonal bracing of all the frame panel welded with MS flat 25x3mm support,groutin properly by cement concrete and course sand all material provided by contractor.

Fabrication and fixing of DP box stand made of MS Angle ,grouting and plinthing of the same all material provided by contractor.

Fabrication and fixing of Metalic Distribution Pillar box on stand with Nut bolt made of 20 SWG BP Sheet with door 18 SWG BP Sheet ,with fixing of 2 Nos MS Angle for mounting of Fuse unit then fixing of fuse unit 500 Amp 650 Volt and 3 Nos copper Bus Bar and 1 No Al Busbar all material arrange by contractor.

Earthing of Pipe type with 60 feet deep boring and provid-ing jindal make pipe "B" class 1" dia and GI strip 25x5 6mtr long attached with clamps and GI pipe.

Laying stringing and sagging of 3phase 3 wire 11KV Line by ACSR Racoon-Conductor ,conductor provide by department.

Opening of jumpers binding from insulators and dismantling of Mix Conductor and its carriage upto JE /esc store

Laying of 11 KV cable 3x70 sqmm Double circuit in pukka road by digging of trench upto 1 Mtr Deep 0.6Mtr width putting cable boxing with bricks and sand refilling of earth and proper ramming ,only cable provided by department.

Laying of 11 KV cable3 x120 sqmm Single circuit in pukka road by digging of trench upto 1 Mtr Deep 0.6Mtr width putting cable boxing with bricks and sand refilling of earth and proper ramming ,only cable provided by department.

Hoisting of cable will be passed through GI pipe required size duly clamped with pole at the bottom ,middle and top of the pole.

High pressure testing of 11KV Cable by high pressure equipment.

Proper Jumpering of HT Cable with supply system.

Opening from supply system at both end,dismantling of HT AB Cable from poles safly and its carriage upto JE Dump/Central store.

Errection and commissioning of AB Conductor of size 3x120/95/50/25sqmm.

Commissioning of 3 Phase LT Distribution Box and connect with AB Conductor by the help of PVC Single core cable Only Box provided by department.

Supply and fixing of clamps

Holding clamp.

LT Clamp for pole with GI Strip and schckle insulator.

Crimping Al Lugs 240/400/630 sqmm.

Copper L-Piece for T/F.

Nut bolts off size.

Danger board with clamp.

Sundry Item.

GI Pipe 75 mm Dia.

MS Angle.

PVC Single core.

Grouting binding nozzelling of stay set complete including fixing of necessary clamps accessories Grouting material provided by contractor

Ordinary Earthing by MS Earth rod2500 mm long by GI wire all material provide by department

Fixing and installation of 11KV /33KV O/D type XLPE Jointing Kit ,olny jointing kit provide by department

Providing Fabrication and fixing of 11KV TPMO Set

Grouting of pole by cement course sand and brick ballast Civil material provided by Contractor

Painting of ST pole by 2 coat of red oxide and 2 coat of Al paint Paint provided by contractor.

Safe installation of 11/0.4 KV 630 KVA T/F its connection from 11KV line and LT line mounting of copper L-piece providing and fixing of al lugs Labour and T&P by contractor.

Safe installation of 11/0.4 KV 400 KVA T/F its connection from 11KV line and LT line mounting of copper L-piece providing and fixing of al lugs Labour and T&P Provided by contractor.

Dismantling of 250/400 KVA T/F after opening of all the HT/LT Connection and its carriage upto JE/ESC Store centre including loading unloading.

Rearrangement of existing four pole fittings like top channels,dropper channel and other fittings for plinth mounted LT Substation.

DEEPAK ENGINEERING

A. A. ENGINEERING CO.