Maint of Internal Electrification works for OTM Accn at Faridkot Mil Stn

Amount

Taking down carefully unserviceable existing aluminium/copper point wiring light, fan, socket or power bell complete with fitting such as switches, sockets, ceiling roses, holders, call bells and making good to disturbed area matching the colour with existing surface all as specified and directed. Note: Rate for making good shall be deemed to be included in above item rate.

Point wiring complete with ISI marked 1.5 sqmm single core PVC insulated unsheathed cable 1100 Volts grade FRLS with multistranded copper conductor drawn through concealed/surface in wall/roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed conduit suitable size with all accessories such as bend, reducers, MS hooks, MS junction boxes, 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switchs, sockets, fan regulator etc covered with 2.8 mm thick plastic laminate Hylem/Anchor top cover sheet of required colour fixed with brass screws and cup washers painting terminal boxes inside and outside with one coat red oxide primer including fixing and 1.5 sqmm copper conductor as earth continuity to connect common earth dolly for One light point/Fan point/Exhaust point and call bell point controlled by one way switch complete all as specified and as directed.

All as per Srl item No. 02 here-in-before but One light point controlled by two 2 way switch all as specified and as directed.

All as per Srl item No. 02 here-in-before but One three pin socket out let 5 amps on the same board with other switches all as specified and as directed.

All as per Srl item No. 02 here-in-before but One 3 pin, 5A switch socket outlet point on independent board all as specified and as directed.

All as per Srl item No. 02 here-in-before but One Bell point controlled by one bell push all as specified and as directed.

All as per item no. 02 here-in-before but with 2.5 sqmm cable for 1No 16 amps switch socket outlet point on independent board including 2.5 sqmm PVC insulated unsheathed cable multistranded with copper conductor green in colour as earth continuity conductor all as specified and directed.

Supply and fixing PVC Lamp holder suitable for LED 5 to 20 watt bulb including taking down old unserviceable holder any size complete all as specified and directed all as specified and directed.

S & F of complete set of LED tube light fiting 1x20W, (4 feet long) 230 V, surface and wall mounted decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories including connections up with copper conductor wire with suitable size as including taking down old unserviceable tube light any size per specification and directed. Make-Havells/Philips/Bajaj.

Supply and fixing of LED tube light fiting 10W, (2 feet long) 230 V, surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver and including connections up with copper conductor wire with suitable size as per specification and directed. Make-Havells/Philips/Bajaj.

Supply and fixing complete set of LED mirror light fiting 1x10W to 17 W, 230 V, including LED lamp with driver complete sutable for fixation on wall with body retrofit corrosion resistant superior finish (cool white, Round) and without any cracks through holes with all accessories pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old unserviceable tuble light any size as per specification & directed. Make-Havells/Philips/Bajaj.

M &L complete set of 1x10 watt LED retrofit type bulk head fitting luminaries die cast aluminium alloy body heat resistant prismatic glass cover,with specially designed gasket, lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size including taking down old unserviceable light fitting any type as per specification complete all as specified and directed. Make : Havells/Philips/Bajaj

M&L ceiling rose 3 phase, PVC / polycarbonate isolated body including taking down old unserviceable ceiling rose any size all as specified and directed.

M&L submain wiring with two single core PVC FRLS insulated stranded copper conductor cable of size 10 sqmm and same 10 sqmm for continuous earth wire drawn in to concealed PVC conduit including taking down carefully unserviceable existing aluminium/copper sub main wiring and making good to disturbed area matching the colour with existing surface complete all as specified and directed. Note: Cost of PVC conduit, conduit accessories and earth wire including in sub main wiring.

M&L submain wiring with two single core PVC FRLS insulated stranded copper conductor cable of size 6 sqmm and same 6sqmm for continuous earth wire drawn in to concealed PVC conduit including taking down carefully unserviceable existing aluminium/copper sub main wiring and making good to disturbed area matching the colour with existing surface complete all as specified and directed. Note: Cost of PVC conduit, conduit accessories and earth wire including in sub main wiring

S&F Piano type switch single pole 1 way 5/6 amps 230 volt AC supply including taking down old unserviceable switch any size complete all as specified and directed.

S&F Socket two in one 5 Pin 5 Amps 230 volt AC supply including taking down old unserviceable socket any size complete all as specified and directed.

S&F Piano type switch single pole 1 way 15/16 amps 230 volt AC supply including taking down old unserviceable switch any size complete all as specified and directed.

S&F Piano type switch single pole 2 way 5/6 amps 230 volt AC supply including taking down old unserviceable switch any size complete all as specified and directed.

S&F Bell push flush type 5 Amps complete all as specified and directed.

S&F in replacement Bell ding dong AC 230V single pole incl taking down unsv bell any type all as specified and directed.

S&F socket two in one 6 Pin 15/16 Amps 230 volt AC supply including taking down old unserviceable socket any size complete all as specified and directed.

S&F sheet metal enclosure for DB's TPN 440 volts 4 way with 250 amps rated bus bar double door including taking down old unserviceable DB any size and making good to disturbed area matching the colour with existing surface all as specified and directed. Note : If serivceable MCCB, MCB than same taking down MCCB, MCB and re-fixing MCCB, MCBs.

All as per item No 23 here-in before but SPN 230 volts 8 way with 200 amps rated bus bar including taking down old unserviceable DB any size and making good to disturbed area matching the colour with existing surface all as specified and directed. Note : If serivceable MCCB, MCB than same taking down MCCB, MCB and re-fixing MCCB, MCBs.

S&F MCCB 3 Pole, 415 V, 160 Amps with breaking capacity 36 KA including taking down old Unserviceable MCCB all as specified and directed.

S&F MCB SP 32 amps 240V 'B' curve with breaking capacity 10 KA in the MCB DB complete with connection testing and commissioning including taking down old Unserviceable MCB all as specified and directed.

S&F MCB SPN 32 amps 240V C Series breaking capacity 10 KA, in the MCB DB complete with connection testing and commissioning including taking down old Unserviceable MCB all as specified and directed.

S&F MCB SPN 63 amps 240V B Curve breaking capacity 10 KA, in the MCB DB complete with connection testing and commissioning including taking down old Unserviceable MCB all as specified and directed.

Earthing complete with galvanised steel earth plate electrode of size 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 m below normal GL connected to galvanised earth lead wire 4.0mm dia (8 SWG) by means of bolts, nuts, check nuts and washers thimble etc to the extend 7.5 mtr as earth lead by means of GI bolts & nuts etc. and connected to main distribution board panel/earthing test point protected by 20 mm dia GI pipe medium grade all as shown on electrical plate No.3 of SSR Part I and all as specified including testing on including taking down old unserviceable earthing any size completion all as specified and directed.

S & F fan regulator electronic socket /stepped flush type 5 speed for ceiling fan 1200/1400 mm sweep on the existing phenolic laminated sheet etc. including taking down old unserviceable fan regulator any size complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying cables/poles foundation / stay assembly and getting out in soft/loose soil all as specified and directed.

Returning, filling in, including spreading, levelling,watering and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed .

Removal of surplus excavated soil to a distance not exceeding 50metre and depositing where directed at a level not exceeding 1.5 metre above the starting point, complete all as specified and directed.

M&L for sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supply and laying, burnt bricks, sub class 'B', old size for cable protection, laid length wise perpendicular to the axis of cable complete all as specified and directed.

Supply, laying, jointing, testing and commissioning of Low Tension (LT) XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 25 Sqmm, 4 core, aluminum conductor, 1100 volts grade under ground cable including both side connection with lugs/thimbles of suitable size etc, laid in trenches, along poles or passing through pipes or laid under floor or through walls etc, complete including taking out old cable & bricks all as specified and as directed. Note: (i) Returning filling, earth work, sand cushioning and brick cover for protection of cable shall be measured and paid separately.

Supply and fixing LED street light 25 watt luminaries comprising of epoxy powder coated housing, enclosed with glass cover including 32mm light grade GI Bracket and fixing arrangement in road light, security light etc complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable 1.5 sqmm with suitable size and including taking down defective unserviceable street /security light any size as per specification & as directed. Make: Havells/ Philips/ Bajaj.

Supply and laying 40 mm bore light grade galvanised for protection of LT cable in poles, under road crossing in floor and post lantern light etc incl taking down unsv tubing all as specified and directed.

S&F sheet metal enclosure wih socket plug top and MCBs 20 Amp single pole (AC box) complete all as specified and directed . Make : Legrand/ Havells/L&T

Supply and fixing Modular switch 1 way 16 amps 1 module incl taking down unsv switch any type all as specified and directed.

Supply and fixing Modular socket 15 /16A - 5/6 pin 2 module incl taking down unsv socket any type all as specified and directed.

Supply and fixing Modular switch 1 way 6 amps one module incl taking down unsv switch any type all as specified and directed.

Supply and fixing Modular switch 2 way 6 amps one module incl taking down unsv switch any type all as specified and directed.

Supply and fixing Modular switch bell push 6 amps one module incl taking down unsv switch any type all as specified and directed.

Supply and fixing Modular socket 6A 5/6 pin 2 module incl taking down unsv socket any type all as specified and directed.

S&F modular metal flush box 1/2/3 modules incl taking down unsv box any type and making good to disturbed area matching the colour with existing surface all as specified and directed.

S&F modular metal flush box 4 modules incl taking down unsv box any type and making good to disturbed area matching the colour with existing surface all as specified and directed.

S&F modular metal flush box 6/8 modules incl taking down unsv box any type and making good to disturbed area matching the colour with existing surface all as specified and directed.

Supply and fixing Modular white plate with frame 1 module incl taking down unsv plate any type all as specified and directed.

Supply and fixing Modular white plate with frame 2 module incl taking down unsv plate any type all as specified and directed.

Supply and fixing Modular white plate with frame 3 module incl taking down unsv plate any type all as specified and directed.

Supply and fixing Modular white plate with frame 4 module incl taking down unsv plate any type all as specified and directed.

Supply and fixing Modular white plate with frame 6 module incl taking down unsv plate any type all as specified and directed.

Supply and fixing Modular white plate with frame 8 module incl taking down unsv plate any type all as specified and directed.

S&F in replacement of MS sunken box 2mm thick galvanised steel pressed sunken terminal boxes size 75mmx75mm and 60 mm deep, painted on both sides inside and outside with one coat of red oxide primer of suitable sizes for mounting of switches sockets, fan regulators, etc. with 3mm thick plastic laminated sheet cover size (75mmx75mm) etc including taking down old unserviceable items making good to the disturbed surfaces of walls, matching the colour with existing surface complete all as specified & directed.

S&F in replacement of MS sunken box 2mm thick galvanised steel pressed sunken terminal boxes size 100mmx100mm and 60mm deep, painted on both sides inside and outside with one coat of red oxide primer of suitable sizes for mounting of switches sockets, fan regulators etc. with 3mm thick plastic laminated sheet cover size (100mmx100mm) etc including taking down old unserviceable items making good to the disturbed surfaces of walls, matching the colour with existing surface complete all as specified & directed.

S&F in replacement of MS sunken box 2mm thick galvanised steel pressed sunken terminal boxes size 150mmx75mm and 60mm deep, painted on both sides inside and outside with one coat of red oxide primer of suitable sizes for mounting of switches sockets, fan regulators etc. with 3mm thick plastic laminated sheet cover size (150mmx75mm) etc including taking down old unserviceable items making good to the disturbed surfaces of walls, matching the colour with existing surface complete all as specified & directed.

S&F in replacement of MS sunken box 2mm thick galvanised steel pressed sunken terminal boxes size 150mmx150mm and 60mm deep, painted on both sides inside and outside with one coat of red oxide primer of suitable sizes for mounting of switches sockets, fan regulators etc. with 3mm thick plastic laminated sheet cover size (150mmx150mm) etc including taking down old unserviceable items making good to the disturbed surfaces of walls, matching the colour with existing surface complete all as specified & directed.

S&F in replacement of condenser 3.15/2.5 Mfd AC 240V, incl taking down unsv condenser any type all as specified and directed.

Supply and fixing of 2x2 LED light fiting 34 w to 42w, (600mmx600mmx70mm), 230 V, ceiling mounted, pluto panel (surface) LED flate panel for surface mounting which provides soft-light and glare free symmetrical illumination, connections up with copper conductor wire with suitable size incl taking down unsv light any type as per specification and directed. Make-Havells/Philips/Bajaj.

S& F PVC non metallic rigid conduit 25 mm external dia (medium grade) ISI marked exclusive of boxes but inclusive all tees bends, reducer, bell mouth tube ends and fixing accessories concealed including cutting, chases in wall floor making good all disturbed surface, matching with existing surface conduit hooks, screw washers & connection/ drawing colour washing etc. complete all as specified and directed. Note :- A Sum of Rs. 48936.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 24 (Schedule of credit) of Tender Documents.

NEW AMRITSAR CONSTRUCTION COMPANY

ROYAL BUILDERS

M/S ASHWANI SETHI