Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹18.8 L+₹4,015 (0.21%)Rejected-Finance VILLAGE CHANNI POST OFFICE SATTANI DISTT UDHAMPUR UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L2 | Rejected-Finance L2 | |
| 3 | L3₹19.4 L+₹69,175 (3.69%)Rejected-Finance 94 PHASE II HOUSEING COLONY UDHAMPUR J K | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-Finance L3 | |
| 4 | L4₹19.5 L+₹75,510 (4.03%)Rejected-Finance | L4 | Rejected-Finance L4 |
Tender Value
Refer Docs
EMD Value
₹41,600
Closing Date
17 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF UDHAMPUR
GE AF UDHAMPUR
ADDN/ALTN TO LEFT OVER KITCHENS OF OLD SMQs AT AF STN UDHAMPUR
2022_MES_546631_1
GE/AFU-40/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF Udhampur
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE AF UDHAMPUR
₹41,600
Yes
20 Sept 2022
22 Aug 2022
19 Sept 2022
22 Aug 2022
17 Sept 2022
5 Sept 2022
22 Aug 2022 - 27 Aug 2022
60 days
Amount
Dismantling boarding of any description,fixed in any position with nails including cover fillets,complete all as specified and as directed by Engineer-in-Charge.
S&F 18 mm thick Plywood, grade BWR,type BB, fixed with screw to timber frame work, including 1mm thick PVC moulding all around including edging,complete all as specified and as directed by Engineer-in-Charge.
S&F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge.
S&F 100 mm Brass handles, cast type, polished bright complete all as specified and as directed by Engineer-in-Charge.
S&F 30mm (width of flaps) Continous (Piano) hinges of mild steel, bright finish complete all as specified and as directed by Engineer-in-Charge.
S&F stainless steel magnet catcher of size 55mmx30mmx15mm for wooden pannel, complete all as specified and as directed by Engineer-in-Charge.
Dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed by Engineer-in-Charge.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and as directed by Engineer-in-Charge.
M&L 20mm thick granite of any colour work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms including pipe holes and like in cement mortar(1:4) including pointing in white cement(1:2) using marble dust with admixture of pigment to match withshade of graniten including screed bed bedding layer of 15 mm thick in CM 1:6 and polishing, complete all as specified and as directed by Engineer-in-Charge.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed by Engineer-in-Charge..
M&L non-skid coloured ceramic tiles tiles (Square / Rectangular) area of each tile exceeding 0.11 sqm but not exc. 0.18 sqm ,7-8 mm thick in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including screed bed bedding layer of 15 mm thick in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
M&L glazed ceramic colour tiles as in vertical surfaces such as skirting ,dados etc 350x250x7 mm thick/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface incl. 10 mm thick plaster in CM 1:4 complete all as specified colour and design approved by Engr-in-Charge.
Taking down cement plasater, any description on brick or stone or cement cement concrete walls including raking out joints, hacking for key , scrupping down with water complete all as specified and as directed by Engineer-in-Charge.
M & L 02 coats of OBD over acoat of primer inclpreparation of new plastered surfaces on walls complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing & connections, incl cleaning for refixing etc for 15mm dia pipe complete all as specified and as directed by Engineer-in-Charge..
M&L tubes medium grade galvanized with all fitting and fixed complete to walls or laid in floors for 15mm bore pipe complete all as specified and as directed by Engineer-in-Charge..
Refixing old steel tubing & connections in new or old position for 15mm dia pipe.and making good complete all as specified and as directed by Engineer-in-Charge..
Demolition of cement concrete reinforced (reinforement cut as required to facilitate demolition) roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and removing form site complete all as specified and as directed by Engineer-in-Charge.
M&L for RCC (nominal mix) Type B1 1:2:4 using 20mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs landings, balconies, canopies and in shelves and the like complete all as specified and as directed by Engineer-in-Charge..
M&L for form work to soffits of flat, fair finished surfaces of concrete of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or sloping) complete all as specified and as directed by Engineer-in-Charge.
M&L mild steel TMT bars 10mm dia and over cut to length bent to shape including cranking bending spirallay for hooping for columns hooking end and binding with and including mild steel wire (annelead) not less than 0.9mm dia or scuring with clips of Fe-410-W (Gde.E-250) quality-A, complete all as specified and as directed by Engineer-in-Charge.
S&F single / double lever sink mixer (wall mounted) with 200 mm(8') long swivel spout connecting les and wall flanges complete all as specified and as directed by Engineer-in-Charge.
S&F 15 mm bore angle valve with wall flange fency type chromium plated, screwed down, high pressure with cruth or butterfly handle complete all as specified and as directed by Engineer-in-Charge..
S&F geyser connection pipe (SS) 12mm size with CP nuts of length 450mm complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs Kitchen Sinks made of stainless steel 1mm thick overall size 915mmx460mm and bowl size 410mmx330mmx160mm for kitchen or laboratory with plugs, washers and wastes, inlcuding bedding in cement mortar connecting union to pipe, PVC flexible pipe of 40mm dia with threaded adopter confirming to class III from sink to nahni trap of approved brand including cost of materials, adhesive solution, inlcuding coupling and with a pair of suitable C.I. brackets including painting the brackets with two coats of approved paint cutting holes in walls and making good the same etc,complete all as specified and as directed by Engineer-in-Charge.
S&F in repair cast Iron floor trap with dia of outlet 75mm with stainless steel grating incl joining to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified and as directed by Engineer-in-Charge.
S&F in repair bib taps 15mm bore, fancy type, cast copper alloy chromium plated with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and as directed by Engineer-in-Charge.
S&F in repairs stainless steel plate rack size 30" x 30" x 8" for grill 12 nos plates and hook for hanging cupscomplete all as specified and as directed by Engineer-in-Charge.. Make :- NIRALI, Jayna, Diamond.
S&F Sheet glass ordinary quality 5.5mm thick and glazing to wooden work with PVC holders n.exc 0.5mm in each pane complete all as specified and as directed by Engineer-in-Charge.
S&F steel concealed hydraulic auto soft closing hinges fixed to wooden frames/shutters in cupboard complete all as specified and as directed by Engineer-in-Charge. Make :- Godrej, KICH, KANOR, SPIDER, MET CRAFT.
S&F drawer side telescopic channel of standard size of standard length,inclusive of roller for moving drawer,mild steel bright finish or electro galvanised width of flap 30mm complete all as specified and as directed by Engineer-in-Charge. Make :- Godrej, HETTICH, KIZONE, EBCO, MET CRAFT.
S&F Stainless steel multipurpose baskets in wooden drawer /partition for storing ration of various type made of 4mm dia stainless steel rods,fixed in side partition etc,complete all as specified and as directed by Engineer-in-Charge. Make :- Godrej, Ozone, Overseas, Platinum.
S&F stainless steel luddle-craddle stand for cutley complete all as specified and as directed by Engineer-in-Charge. Make : Usham Shri ram Enterprises Pvt Ltd, Godrej, Ozone, Overseas, Platinum.
S&F stainless steel dust bin holder stand 250mm dia 135 mm to 150mm height for kitchen fixture complete all as specified and as directed by Engineer-in-Charge. Make :- Godrej, Ozone, Overseas, Platinum.
S & F Swivel wheel castor with 360 degree rotating 175-200 Kg load capacity complete all as specified and as directed by Engineer-in-Charge..
PARAS RAM ASGOTRA AND SONS
SHIVAE CONSTRUCTION
RAMAN CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .