Reconstruction of existing old Public Toilet Blocks near SCF-10 Sector 24-C and near SCF-125, Sector 24-D, Chandigarh

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead As per DSR item No. 15.26

Demolishing mud phaska in terracing and disposal of material within 50 metres lead As per DSR item No. 15.27

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below As per DSR item No. 15.12.1

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. As per DSR item No. 15.25

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar As per DSR item No. 15.7.4

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge As per DSR item No. 15.3

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.As per DSR item No. 14.79

Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead As per DSR item No. 15.52

Dismantling Wash hand basin of all sizes and shapes carefully, including disposal of dismantled materials i/c malba all complete in all respect as per the entire satisfaction of Engineer in charge (NSI)

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge. 15 mm to 40 mm nominal bore As per DSR item No. 15.44.1

Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead As per DSR item No. 15.42.2

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. As per DSR item No. 2.8.1

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) As per DSR item No. 4.1.10

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) As per DSR item No. 6.1.2

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) As per DSR item No. 4.10

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. As per DSR item No. 4.13

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) As per DSR item No. 6.4.2

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) As per DSR item No. 6.13.2

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) As per DSR item No. 13.1.1

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. As per DSR item No. 11.3.1

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As per DSR item No. 5.3

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. As per DSR item No. 5.9.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. As per DSR item No. 5.22.6

Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : 12.15.1 With residual type petroleum bitumen of grade VG -10 As per DSR item No. 12.15.1

10 cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa @ 35 kg per cum of earth and gobri leaping with mix 1:1 (1 clay : 1 cow dung) and covered with flat tile bricks, grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finished neat. With common burnt clay F.P.S. (non modular) brick tile of class designation 10 As per DSR item No. 12.16.1

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75mm deep chase As per DSR item No. 12.21.1

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. As per DSR item No. 12.22

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab colour of Black, Cherry/ Ruby Red or equivalent As per DSR item No. 11.56.1

Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete As per DSR item No. 8.4

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. As per DSR item No. 8.5

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/ Ruby red. Area of slab over 0.50 sqm As per DSR item No. 8.2.2.2

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thickbed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cementslurry @ 3.3kg per sqm including pointing in white cement mixed with pigmentof matching shade complete. Make: kajaria, orient bell As per DSR item No. 8.31

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.As per DSR item No. 13.91

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per DSR item No. 13.80

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer As per DSR item No. 13.41.1

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre As per DSR item No. 13.85.3

Providing and painting of appex outside the toilet (NSI)

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in-charge. Decorative finish (wood grained finish) As per DSR item No. 9.142.2

Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer's specification and direction of Engineer -in- charge. As per DSR item No. 9.141

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes. As per DSR item No. 10.31.1

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125mm As per DSR item No. 9.100.1

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 300x10 mm As per DSR item No. 9.97.1

250x10 mm As per DSR item No. 9.97.2

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper As per DSR item No.9.101.2

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushingcistern, including flush pipe, with manually controlled device (handle lever)conforming to IS : 7231, with all fittings and fixtures complete, including cuttingand making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests As per DSR item No.17.1.1

Providing and fixing white vitreous china pedestal type water closet (Europeantype W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern,including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid As per DSR item No.17.2.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. White Vitreous China Flat back wash basin size 550x 400 mm with single. 15 mm C.P. brass pillar tap As per DSR item No.17.7.4

Extra over & aboveitem No. 17.7.4 of DSR for using under counter washbasin of size 550x445x190 mm as per arctechcural drawing, code c0494 of parryware (Nilagara ) model with auto closing pillar cock system code G 2013 A1 of Parry ware (Lapis neo) with adjustable brackets (special for under conter) to entire satiusfaction of Engineer in charge (NSI)

Providing and fixing of Grab Rail stainless steel pipe 1-1/4" and fitting of grade AISI 304 as per JIS standard 3448 including fitting and fixing of pipe with clamps at 1.00 m spacing including cutting and making as per the entire satiusfaction of Engineer in charge (NSI)

Providing and fixing of Urinal Partition 10mm thick Toughned Glass frosted both sides of size 3x1.5 fixed in position with clamps holdings the glass. All exposed edges to be grined with smooth finish to the entire satiusfaction of Engineer in charge including carriage of materials to site of work (NSI)

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. As per DSR item No.17.16A

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete As per DSR item No.17.31

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern As per DSR item No.17.4.1

Providing and fixing CP brass auto closing concealed urinal press matic taps complete in all respect as per the entire satiusfaction of Engineer in charge (NSI)

Providing and fixing of CP brass angular stop cock of approved make complete in all respect as per the entire satiusfaction of Engineer in charge. (NSI)

Providing and fixing of CP brass bib cock, Prematic Taps of approved make complete in all respect as per the entire satiusfaction of Engineer in charge (NSI)

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms As per DSR item No.17.71

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms As per DSR item No.17.72

Providing and Fixing Toilet paper holder: C.P. brass As per DSR item No.17.34.1

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm dia nominal bore as per DSR item No.18.11.1

20 mm dia nominal bore as per DSR item No.18.11.2

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 25 mm dia nominal bore as per DSR item No.18.12.3

32 mm dia nominal bore as per DSR item No.18.12.4

Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required 15 mm nominal bore as per DSR item No.18.47.1

20 mm nominal bore as per DSR item No.18.47.2

25 mm nominal bore as per DSR item No.18.47.3

Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc as per DSR item No.18.78

Providing and fixing soil, waste and vent pipes : 75 mm diameter : Sand cast iron S&S pipe as per IS: 1729 as per DSR item No.17.35.2.1

Providing and fixing collar : 100 mm Sand cast iron S&S as per IS - 1729 as per DSR item No.17.57.1.1

Providing and fixing Drip Seal Joints for HCI pipes of size 75 mm including the cost of yarn, caulking complete in all respect sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameter

Providing and fixing plain bend of required degree : 100mm dia Sand cast iron S&S as per IS - 1729 as per DSR item No.17.39.1.1

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors. 100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS- 1729 as per DSR item no.17.60.2.2

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 100 mm nominal dia Pipes as per DSR item no.18.9.9

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks as per DSR item no.18.76.1

Providing and laying of water proofing complound (special quality) on roof. (NSI)

Cutting chases in brick masonry walls for following diameter sand cast iron/ centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand). 100mm dia as per DSR item No.17.61.1

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. as per DSR item No.18.77

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per DSR item No.19.30.1.1

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 as per DSR item No.19.4.1.1

Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps : 150 mm diameter as per DSR item No.19.5.2

Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150 mm diameter as per DSR item no.19.1.2

Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe as per DSR item no.19.2.2

Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For pipes 100 to 250 mm diameter as per DSR item no.19.21.1

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as Directed, within a lead of 50 m. All kinds of soil. Pipes, cables etc, not exceeding 80 mm dia. as per DSR item No.2.10.1.1

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore as per DSR item No.18.17.1A

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm nominal bore as per DSR item No.18.18.2

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank as per DSR item no.18.48

Providing and fixing of GI extension nipple for water storage tank pipe, fittings of approved quality 20mm nominal bore complete in all respect as per the entire satiusfaction of Engineer in charge (NSI)

Providing and fixing of in position best indian make ISI marked 15mm CP brass extionsion nipples including the cost of CP flange complete in all respect as per the entire satiusfaction of Engineer in charge (NSI)

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. As per DSR item No.17.22A

Providing and fixing 100 mm sand cast Iron grating for gully trap. As per DSR item No. 17.29

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore As per DSR item No. 18.21.2.1

Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/ cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. For 100 mm dia pipe As per DSR item No.17.37.1

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia as per DSR item No.17.28.1.1

Providing and fixing of Crompton Greeves 1 HP wapter pupm with help of fasteners to be fixed at sie as per entire satisfaction of Engineer in charge (NSI)

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. as per DSR item no. 9.84

Providing and fixing sanitary napkin vending machine, incinerator, Battery and happy days pad complete in all respects. Cost of wiring switch board, Power plug & sunt choke complete EIC. (NSI)

Providing and fixing of wall mounted Touch-free infrared activation ABS Plastic Hand dryer, 65 Decibel noise level, width 200 millimeter Height 230 millimeter Depth 140 millimeter less than 15 sec for hand dry with heater element and 1 year warranty (NSI)

Providing and fixing of exhaust fan of 12" of reputed make with metallic blades make of Crompton/Bajaj heavy duty complete in all respect as per the satisfaction of Engineer in charge.(NSI)

Providing and fixing of ceiling fan of 48" of reputed make ofUsha/Crompton/ Khaitan complete in all respect as per the satisfaction of Engineer in charge.(NSI)

Providing and fixing of tubelight 4', 1x40 watt type Usha/ Havells/ Philpis complete in all respect as per the satisfaction of Engineer in charge. (NSI)

Providing and fixing of concealed type fitting in walls including the cost of CFL 32 W lamp box, fitting complete in all respect as per the satisfaction of Engineer in charge. (NSI)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group B as per Elect. DSR No.1.3.2

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. Group B as per Elect. DSR No.1.13

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole (As per electrical DSR No. 2.10.1)

Double pole and neutral (As per electrical DSR No. 2.10.2)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way, Double door (As per electrical DSR item no 2.3.1)

Earthing of sheet / iron clad switches & metallic cases with no 8 SWG (4mm dia) GI wire in 15 mm dia GI pipe partly recessed & party on surface complete 135 cm long 50mm dia GI earth pipe with GI reducing socket including erection of 4 mtr below ground level with necessary charcoal salt mixture etc upto 9 mtr in length (including boring & refilling) (NSI)

Providing and fixing of Acrylic sheet with silver remark engraving plate 12"x12" in position at required place to the entire satisfaction of Engineer in charge (NSI)

Providing and fixing of Acrylic sheet with silver remark engraving plate 12"x12" in position at required place to the entire satisfaction of Engineer in charge (NSI)

Providing and fixing Sun Board printing with laminated on 5mm Sun board of size 6'x2' to be fixed at the height of 12' from NGL, leveled in position to the entire satisfaction of Engineer in charge (NSI)

Providing and fixing of Sun Board printing with laminated on 5mm Sun Board of SIze 30"x24" to be fixed levelled in position to the entire satisfaction of Engineer in charge (NSI)

Providing, fixing, testing, commissioning of solar panel based inverters 165W Polcrystalline Module Battery 180 Amp. Invertors 800VA with invertors stand including cost of wiring, construction of panel stand on roof top complete in all respects as per satisfaction of EIC. (NSI)

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. as per DSR item No.16.90

Providing and fixing wall mounted ABS Plastic Bottom Napkin Dispenser with maximum 200 No. of Wipes with dimension 250mm length, 75mm width, 260mm height complete in all respects as per the entire satisfaction of EIC. (NSI)

Providing and placing HDPE waste container for wet and dry waste of capacity 20 Ltr with foot pedestal operated opening lid. (NSI)

Credit against old MS doors, ventilators, windows etc. (NSI) Distemntle W, D & V & steel reinforcement: approx. 2300 Kg.

Credit against old Roof tiles Roof tiles i.e 192.18 sqm x 60 % x 39 Nos per sqm = 4497.012 nos Say 4497 nos.

Credit against old bricks Bricks i.e 45.57 cum x 60 % x 494 per cum=13506.95 nos. Say 13507 nos.

Please Enable Macros to View BoQ information