Karnataka

AOC

Works

Roads

Road Safety Works on Highway connecting Hunasanahalli with Chikkahalli road (SH 3) from KM 106.10 to 106.60 KM Gudemaranahalli Petrol Bunk and Magadi-Dabaspete Road,Near Gudemaranahalli) in Magadi Taluk Ramanagar District

Public Works Department

PRAMC PWD Bengaluru | Bengaluru, Karnataka

Amount: ₹1.1 CrCloses: 28 May 2025Closed

Timeline

Published21 May 2025
Closed28 May 2025
Awarded—

Bids

1 Bid28 May 2025

#	Company	Amount	Status
1	KOTALADINNE CHIKKANARASAPPA MAHESH ₹1.1 Craccepted-aoc	₹1.1 Cr	accepted-aoc

Tender Value

₹1.1 Cr

EMD Value

₹2 L

Closing Date

28 May 2025, 11:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

Executive Engineer

Office Number

Work Description

Road Safety Works on Highway connecting Hunasanahalli with Chikkahalli road (SH 3) from KM 106.10 to 106.60 KM Gudemaranahalli Petrol Bunk and Magadi-Dabaspete Road,Near Gudemaranahalli) in Magadi Taluk Ramanagar District

Tender Information

Tender ID

PWD/2025-26/RD/WORK_INDENT21623/CALL-2

Reference Number

PWD/2025-26/RD/WORK_INDENT21623/CALL-2

Tender Type

Open

Product Category

Roads

Form of Contract

Two Tender Document System(Two Cover)

Location

PRAMC PWD Bengaluru

Source Website

Subscribe to view

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidder s end

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The bidder shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable.

The employer reserves the rights to reject one or all tenders without assigning any reason.

The employer is not responsible for any delay in accessing E- procurement portal.

Contractors should follow strictly prevailing rules of labour act.

All documents should be uploaded by the contractor is to be attested by the authorized notary or an officer not below the rank of Executive Engineer and should be produced for verification at any stage of process as and when saught for .Failure to produce original documents leads to rejection of Tender

Financial Year will be reckoned as the period between first day of April and Thirty-first day of March of succeeding year (both days inclusive).

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Rates & Prices shall be quoted in Indian Rupees only

The royalty charges on construction materials will be deducted as per prevailing Govt orders.

To qualify for award of this Contract, each tenderer should give all details and documents as per KW-4

Payment of EMD Shall be through E-Payment and shall be valid for 45 days beyond the validity of Tender

GST Shall be paid to the tendered amount separately

Technical Criteria

General

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25 (b) Satisfactorily completed as prime contractor, at least one similar nature of work (Civil Engineering Construction and Building Works Only) value not less than Rs.53.00 Lakhs.

Others -- Work done certificate issued by an officer of rank not below the rank of EE or equivalent

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25 (C) Executed in any one financial year, the following minimum quantities of work: 1.Embankment/Subgrade: 130cum 2. WMM/GSB :412.00 Cum 3. RCC/PCC:137 Cum 4. Road Signages: 25 No 5. Road Marking: 266 Sqm 6.Steel:5 Tonne

Others -- Work done certificate issued by an officer of rank not below the rank of EE or equivalentWork Done Certificate

Capabilities of Vendor

SECTION 2 ITT 3.5 Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their Available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AXNX1.5-B)Where, A is Maximum value of civil Engineering works executed in any one year during the last five years (updated to 2025-26 price level) taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited.B is Value, at 2025-26 price level, of existing commitments and ongoing works to be completed during the next 9 months (period of completion of the works for which Tenders are invited)

Others -- Work done, Balance work done certificate issued by an officer of rank not below the rank of EE or equivalentOthers -- List of existing commitments and ongoing worksOthers -- List of works for which tenders already submitted

To qualify for award of this contract, each Tenderer should be registered as Class-II and above Civil Contractor in KPWD

PWD Registration Certificate (Class I/II/III/IV)

Financial Status

SECTION 2 ITT 3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e., 2020-21 to 2024-25 (a) Achieved in at least two financial years a minimum financial turnover (in all classes of Civil Engineering construction and Building Works only of Rs.212.00 Lakhs.

Audited CA Certificate of Annual TurnoverITR Filed Copy (Mentioning PAN)Others -- Turnover certificate from Registered Chartered Accountant, Balance sheet and Income tax returns

SECTION 2 ITT 3.3 Each Tenderer should further demonstrate(b) liquid assets and/or availability of credit facilities of not less than Rs.36.00 Lakhs (Credit lines/ letter of credit/ certificates from nationalized banks for meeting the fund requirement etc. in the format

Others -- Banker certificate in the prescribed format issued by Nationalized bank as per KW-4Others -- Bank details

Annual turn over certificate

Others -- Annual Turnover certificate for the past five years along with Balance sheets and UDIN mentioned duly attested by Charted accountant

Others

GST Registration Certificate

GST Registration

Consent letter of road safety expert in original with date shall be submitted duly signed in ink along with the technical bids

Others -- Consent letter of road safety expert

Fee & Financial Details

Tender Fee Amount

₹2,650

EMD Fee Amount

₹2 L

Important Dates

Last Activity

28 May 2025

Published

21 May 2025

Bid Opening

30 May 2025

Download Ends

22 May 2025

Pre-Bid Meeting

23 May 2025

BOQ Preview

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Construction of Median and Island with Soil Taken from Roadway Cutting - Construction of Median and Island above road level with approved material deposited at site from ...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Dry Lean Cement Concrete Sub-base - Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic A...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Supplying and installation of Flexible Median Marker (road way indicators, hazard markers) as per IRC 79-2019 for improving median visibility of the road.It shall be made from a com...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Chevron Boards - Supply and installation of retro- reflective Chevron signboards of 600x450mm made out of cube corner micro prismatic grade sheeting confirming to Type XI standards of IRC:67:20...

•

Direction and Place Identification Signs with size more than 0.9 m2 size Board. - Providing and erecting direction and place identification retro- reflectorised sign as per IRC:67:2022 mad...

•

Tubular Marker / Spring post 700 mm (Flexible Bollards) - Providing Tubular marker made up of Polyurethane used to divide opposing lanes of road users shall be fixible in nature. Tubular marke...

•

Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and...

•

Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plaster...

•

Dismantling of Guard Rails - Dismantling guard rails by manual means and disposal of dismantled material with all lifts and lead, stacking serviceable materials and unserviceable materials separately....

•

Dismantling of Flexible Pavements - Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately - By Mechanical ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

•

Construction of Median and Island with Soil Taken from Roadway Cutting - Construction of Median and Island above road level with approved material deposited at site from ...

•

Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...

•

a) Scrapping and removing top soil clearing the site by scrapping and removing top 0.15 m soil to a minimum depth of 0.45 m along with grass removing unwanted debrsis grass along with excavated ...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Kerb Stones - Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer i...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Precast Cement Concrete Interlocking Blocks - Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cy...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel /RCC /PSCC supports as per approved Drawing. ---- Including cost and conveyance of all materials. labour, hire charges of mac...

•

Erection of RCC/PSCC Pole of 7.5 to 8 Mtr long in a pit of 1.5 Mtr depth ---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and...

•

Erection of Double Pole Transformer Structure using 9 Mtr Long RCC (145 Kg WL)/PSCC (300 Kg WL) Pole including fixing of Structure Materials, Erection of Poles etc., complete for mounting of Transform...

•

Pole concrete with CC 1:2:4 (without coping) 11mtr spun pole (1000x1000x2500mm) Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates m3 6243.00 ---- Including cost and conveyance of all...

•

Pole concrete with CC 1:2:4 (without coping) 8mtr Support (400x400x1500mm) Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates ---- Including cost and conveyance of all material...

•

For Three H Frame with Transformer Seating and Seating angle support cross arm for 11 Mtr Spun Pole up to and including 250 kVA (UG Cable) (excluding erection of Pole)

•

---- Including cost and c...

•

Fixing LT Distribution box for 100/250/500 kVA DTC (Excluding wiring)

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and l...

•

Fixing Metering Box for housing the ETV Meter 3 Phase 4 Wire along with CT's, Meter & wiring for DTC for 300/500 KVA TC

•

---- Including cost and conveyance of all materials. labour, hire charges...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff For 3x95 to 150

•

---- Including cost and conveyance of all...

•

Fixing foundation frame of channels and angle iron welding fixing in concrete aligning the RMU on foundation bed, assembly of units, connecting Bus Bars from panel to panel initial filling of oil etc....

•

Consolidated Labour charges for shifting of the existing conductor, including all works associated with shifting of the conductor such as any fittings, aerial fuse boards, cut outs, service main (UG c...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff For HT Cable 3x95 to 150

•

---- Including cost and conveyan...

•

Releasing of Conductor Rabbit

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc...

•

Providing GI Pipe Earthing for Lightning Arrester, Transformer Neutral and Transformer Metal parts (Excluding digging of pits)

•

---- Including cost and conveyance of all materials. labour, hire ...

•

Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT cable

•

---- Including cost and conveyance of all materi...

•

Stringing of conductor Squirrel, Weasel, binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.Rabbit conductor

•

---- Including cost and co...

•

Providing GI Pipe Earthing for Lightning Arrester, Transformer Neutral and Transformer Metal parts (Excluding digging of pits)

•

---- Including cost and conveyance of all materials. labour, hire ...

•

Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment g...

•

Digging of Pit for GUY SET

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc... ...

•

Fabricating,supplying and erecting Swaged tubular Pole of height.m having three sections,and providing two coats of redoxide paint and finished with two coats of enamelled paint of approved quality an...

•

Fixing of GUY Set with break insulator making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing. (Excluding excavation of PIT)

•

Fixing of V-Shape/Horizontal cross arm including Single Top Support Brace and Insulator fixing

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equip...

•

Fixing of 4 Pin cross arm with Insulator and Braces fixing

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lifts, loadi...

•

Fixing Danger Board

•

---- Including cost and conveyance of all materials. labour, hire charges of machineries and equipments with all lead and lifts, loading and unloading charges etc... complet...

•

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Fabricating, supplying and erection of 9 meters -Top 75mm and bottom 165 mm dia Mtrs long hot dip Galvanized Conical pole with BSEN 10025 grade S355JO steel plate for shaft, IS 2062 for base plate wit...

•

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded poly...

•

Double Arm Bracket with 2000mm Standard 40/50mm dia Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts e...

•

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clA, bolts, nuts and wiring using suitable capacity wires.

•

---- Including cost and conveya...

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers 32 amps -

•

---- Including cost and conveyance of all materials. labour...

•

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing material sand 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

•

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 25 amps...

•

Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting

•

---- Including cost and conveyance o...

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

•

Supplyand Installation/Fixing/Provision of Pole box with HRC Fuse/MCB provision and suitable connector/terminal for 3Ph/1 Phconnections with Loop-In & Loop-Outterminals for10mm2/25mm2 3.5 C AI/Ar/Cu/A...

•

Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are ...

•

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron. and M.S. flat with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 50 X50...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Providing and laying Double wall Corrugated HDPE pipes for Electrical. Telecommunication & Signalling lines having flexibility & anti termite, anti corrosive, good abrasion, fatigue strength & UV resi...

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

•

Fabricating supplying and mounting MS box made out SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped wi...

•

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws -

•

---- Including cost...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

KW4 21623.doc

Tender Document • 0.38 MB

TN-18CALL2.pdf

Others - Tender Notification • 0.51 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

KOTALADINNE CHIKKANARASAPPA MAHESH

₹1.1 Craccepted-aoc