Transportation, installation, necessary fabrication, commissioning and trial run including extension of one no. 1000mm width, 1x90kW, 550V, single drive belt conveyor along 17D from 78L to 80L including two pillar extension upto 17D/82L in R-VII seam

Amount

Part A Transportation, installation, necessary fabrication, commissioning & trial run of one 1000mm width, 1x90kW, 550V, single drive belt conveyor for a length of 69mtr from 78L/17D to 80L/17D in R-VII seam

Loading, transportation and unloading of one TSU(315kVA)(6.6kV/550V) to 73L/8D, breaker(550V/200A), starter(550V/90kW), LS unit from surface to 79L/17D(R-VII) with help of haulages & 100 mtr manually. (Distance- approx. 3800mtr.)

Transportation of two reel 150mtr 3.3kV grade 70 sq.mm. PVCDWA cable from urface to 77L/16D(R-VII) with help of haulages. (Distance- approx. 3700mtr.)

Laying-hanging this two reels 150mtr 3.3kV grade 70 sq.mm. PVCDWA cable from 73L/8D to 77L/16D, 77L/16D ACB to 79L/17D ACB manually.

Making of drive head base frame at site with ISMB-250.

Making of tail end frame at site with ISMB-200.

Transportation of 140mtr. 1000mm width PVC belting from surface to 17D belt installation site with help of haulages & 100mtr manually. (Distance- approx. 3800mtr.)

Laying, lapping, jointing & tensioning of this 140mtr. 1000mm width PVC belting in proposed 17D belt.

Transportation of 350mtr belt sequence cable from surface to 78L/9D(R-VII); then laying-placing them from 78L/9D starter to 79L/17D starter in R-VII seam.

Making of drive head base frame at site with ISMB-250.

Making of tail end frame at site with ISMB-200.

Transportation of 140mtr. 1000mm width PVC belting from surface to 17D belt installation site with help of haulages & 100mtr manually. (Distance- approx. 3800mtr.)

Laying, lapping, jointing & tensioning of this 140mtr. 1000mm width PVC belting in proposed 17D belt.

Transportation of 350mtr belt sequence cable from surface to 78L/9D(R-VII); then laying-placing them from 78L/9D starter to 79L/17D starter in R-VII seam.

Transportation of pull cords with its cable, communication devices with its cable, signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) from surface to 17D belt installation site with help of haulages for 69mtr. belt and laying-placing them from 78L/17D to 80L/17D in R-VII seam

Transportation & fitting of 10nos. decking plates at different locations like drive head, discharge, tail end etc.

Testing, trial run, alignment & commissioning of this belt conveyor from 78L/17D to 80L/17D in R-VII seam.

Supply of DA cylinder

Supply of Oxygen cylinder

Supply of MS Nut+Bolt of 5/8" X 2"

Part B:Two times extension for a length of 103.5mtr. from 80L/17D to 82L/17D in R-VII seam. Each time belt extension will be for a length of 34.5mtr.

Two times dismantling of tail end unit complete for Three times belt extension of proposed 17D belt.

Two times transportation and installation of tail end unit complete for three times belt extension of proposed 17D belt from 81L/17D (R-VII) to 83L/17D (R-VII).

Transportation of 1000mm belt structures (i.e. foot stools, channels, brackets, top and bottom rollers etc.) for a length of 69mtr. from surface to belt extension site by haulages and installation them from 80L/17D to 82L/17D in R-VII seam during three times belt extension. *Each time belt extension will be for a length of 34.5 mtr.

Transportation of 138mtr. 1000mm PVC belting from surface through haulages & 100mtr. manually to 17D(R-VII) belt extension site. (Distance- approx. 3900mtr.)

Laying, Lapping, Jointing & Tensioning of this 138mtr. 1000mm belting from 80L/17D to 82L/17D in R-VII seam during two times belt extension and trial run

Transportation of pull cords with its cable, communication devices with its cable, signalling system (8-SWG GI wire, bobbin insulators & 3/8" X 3" MS Bolt-nut) for 69 mtr. from surface to 17D belt extension site and laying & fitting them during two times belt extension.

Supply of MS Nut Bolt of 5/8" X 2"

PART C:Civil foundation works for installation of 1X90kW, 550V, 1000mm wide belt conveyor drive head, discharge unit, loop take-up unit and platform for ACB, Starter for proposed 17D belt conveyor of 3&4 incline, JPC

Recess cutting in stone

Cleaning of MUCK Debris

Sand filling

Brick work with fly ash bricks of class design 75 in foundation and plinth in CM 1:6 (1 Cement :6 Coarse Sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work upto plinth level 1:2:4 (1Cement:2 Coarse sand :4 Graded stone aggregate)

12mm cement plaster of mix:1:6

Loading material into tub and unloading at site

PART D:Roof heightening by drilling, blasting in stone including roof bolting, dressing & Cleaning for proposed belt conveyor installation along 17D) between 78L to 79L in R-VII seam

Roof heightening by drilling blasting in stone including dressing & Cleaning with cost of drill rod and drill bit

Roof bolting including carrying on materials from surface to underground, drilling grouting. & Cost of drill rod and drill bit

Total impact of GST for the purpose of CTC

N.K. ENTERPRISE

F.R. ENTERPRISE