PROVISION OF SERVO CONTROLLED VOLTAGE STABILIZERS 30KVA UPS 3 PHASE OUT INCLUDING CONNECTED WORKS AUTOMATIC POWER FACTOR CORRECTION PANELS FOR CERTAIN BUILDINGS AND PROVISION OF RETROFITTED EMISSION CONTROL EQUIPMENT DEVICED INTO DG SETS FOR REDUTION

Amount

Supply, install, commissioning & testing of Three Phase, Transformer based Online UPS system of capacity 30.0 KVA with in-built isolation transformer, indoor compact type complete with battery system & battery enclosure (Battery stand Made with MS & Power Coating) suitable for minimum 30-40 Minutes back-up & comprising of the following features all as specified & as directed : (DR SITE)

(a) DSP technology with IGBT based inverter. (c) Inbuilt Over Voltage Cut-Off Device with Surge Protection. (b) Smart LCD display for real-time information. (c) Constant voltage constant frequency operation without battery. (d) EMI/RFI Noise filter. (e) Hot Stand-by & Cold start feature. (f) Built-in maintenance by-pass & static by-pass switches. (g) Inbuilt charger of 20 A. (h) Parallel redundancy & battery reverse protection. (j) Configurable Output Voltage Settings. (k) Over temperature indication & protection. (l) Generator compatible. Brief technical specifications of the Transformer based Online UPS system are as follows : MODEL : (a) Type & Capacity - Three Phase, 30.0 KVA/24.0 KW. (b) DC voltage system - Default : 360 VDC, Adjustable :348-384 VDC. (c) Three Phase IN - Three Phase OUT

INPUT : (d) Nominal voltage - 3X380V AC/400V AC.(3PH+N) (e) Input voltage range - 285V AC ~ 485 VAC(Ph-Ph) (f) Frequency range - 40 to 60 Hz OUTPUT : (g) Output voltage - 3X380VAC/415 VAC.(3Ph+N) (h) Freq range Battery mode - 50 Hz + 0.1 Hz. (j) AC Voltage Regulation - + 1% (Battery Mode). TRANSFER TIME : (k) AC to Battery mode - 0 ms. (l) Inverter to by-pass mode - 0 ms. (m) By-pass to Inverter mode - <5 ms. (n) Waveform - Pure Sinewave. EFFICIENCY : (o) Overall efficiency (AC mode) - 90%. (p) Efficiency (Battery mode) - 89%. BATTERY & CHARGER : (q) Battery type/No/Make - LEAD ACID/TUBULAR/SMF12 V, 65 AH/30 Nos/Okaya or Exide for minimum 30-40 Minutes Back-up . (r) Charging current - 5A, Default : 5A. BATTERY ENCLOSURE : Battery enclosure shall be MS Powder Coated. INDICATORS : (s) LCD Display - Load Level, Battery Level, AC Mode, Battery Mode, Bypass Mode & Fault indicators. (t) Alarms - Battery Mode, Low Battery, Overload, Fault. Make/Model : i-MAXX Transformer Based Online UPS of make MICROTEK or techno-commercially equivalent of EMERSON/APC.

Supply, install, commissioning & testing of Three Phase, Transformer based Online UPS system of capacity 10.0 KVA with in-built isolation transformer, indoor compact type complete with battery system & battery enclosure (Battery stand Made with MS & Power Coating) suitable for minimum 01 hour back-up & comprising of the following features all as specified & as directed :-

(a) DSP technology with IGBT based inverter. (c) Inbuilt Over Voltage Cut-Off Device with Surge Protection. (b) Smart LCD display for real-time information. (c) Constant voltage constant frequency operation without battery. (d) EMI/RFI Noise filter. (e) Hot Stand-by & Cold start feature. (f) Built-in maintenance by-pass & static by-pass switches. (g) Inbuilt charger of 20 A. (h) Parallel redundancy & battery reverse protection. (j) Configurable Output Voltage Settings. (k) Over temperature indication & protection. (l) Generator compatible. Brief technical specifications of the Transformer based Online UPS system are as follows : MODEL : (a) Type & Capacity - Three Phase, 10.0 KVA/8.0 KW. (b) DC voltage system - Default : 360 VDC, Adjustable :348-384 VDC.. (c) Three Phase IN - Three Phase OUT. INPUT : (d) Nominal voltage - 3X380V AC/400V AC.(3PH+N) (e) Input voltage range - 285V AC ~ 485 VAC(Ph-Ph). (f) Frequency range - 40 to 60 Hz. OUTPUT : (g) Output voltage - 3X380VAC/415 VAC.(3Ph+N) (h) Freq range Battery mode - 50 Hz + 0.1 Hz. (j) AC Voltage Regulation - + 1% (Battery Mode). TRANSFER TIME : (k) AC to Battery mode - 0 ms. (l) Inverter to by-pass mode - 0 ms. (m) By-pass to Inverter mode - <5 ms. (n) Waveform - Pure Sinewave.

EFFICIENCY : (o) Overall efficiency (AC mode) - 90%. (p) Efficiency (Battery mode) - 89%. BATTERY & CHARGER : (q) Battery type/No/Make - LEAD ACID/TUBULAR/SMF12 V, 65 AH/30 Nos/Okaya or Exide for minimum 1 hr Back-up . (r) Charging current - 5A, Default : 5A. BATTERY ENCLOSURE : Battery enclosure shall be MS Powder Coated. INDICATORS : (s) LCD Display - Load Level, Battery Level, AC Mode, Battery Mode, Bypass Mode & Fault indicators. (t) Alarms - Battery Mode, Low Battery, Overload, Fault. Make/Model : i-MAXX Transformer Based Online UPS of make MICROTEK or techno-commercially equivalent of EMERSON/APC. NOTES for item No. 1 & 2 : 1) Design / drawing / BOM / technical specifications of the complete On-line UPS System incl battery enclosure showing the dimensions is to be obtained from OEM / Auth Channel Partner / Supplier & is to be got approved from Engr-in-charge & GE before placing final order. 2) Techno-commercial comparative analysis is also to be submitted & got approved from Engr-In-Charge & GE whereever techno-commercial equivalency of the product is concerned w.r.t. given Cat/Part/Model/Make ref. 3) The cost of periodical/routine servicing/maintenance including minor repairs/replacement of spare parts (if required) including periodical checking of the complete On-line UPS System for the complete defect liability period (2 Years from certified date of completion of work) from the authorized service dealer/rep as & when required/due is deemed to be included in the unit quoted rates. 4) The complete installation, commissioning & testing of the On-line UPS System is to be got done from the OEM or their auth Rep/Sister Concern/Channel Partners only. 5) Anything missed out in the technical specifications but technically required for efficient working of the On-line UPS System is deemed to be included in the quoted rates. 6) Necessary electric connections/fixing arrangements shall be as per the recommendations of OEM & cost of the same is deemed to be included in the quoted rates. 7) Contractor should visit the site before quoting the tender,10.0 KVA UPS to be fixed at PYKARA Naval trainning centre alongwith connected items.

S&F in repairs Modular type socket out let 2 in 1, 6/16 Amps, 2 module incl taking down old item all as specified and as directed.Make:Verona of crabtree, Cat ACVKCWW163 or techno-commercially equiv In Legrand/Polycab

S&F in repairs Modular type switch with indicator single pole 16 Amps one way, 1 module incl taking down old item all as specified and as directed.Make: Verona of crabtree Cat No.ACVSXIW161 or techno-commercially equiv In Legrand/Polycab

Supply & Fixing in modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Make: Verona of Crabtree ACVPPCWV03 or techno-commercially equiv In Legrand/Polycab

Supply, Fixing and concealing modular metal flush box 3 module suitable for fixing switches/sockets all as directed. Make: Verona of Crabtree,Cat No : ACTXPIWX03 or techno-commercially equiv In Legrand/Polycab

M & L for surface sub-main wiring alongwith earth wire of size of 4 x 10.0 sq. mm + 1 x 10.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non- metallic rigid PVC medium grade Casing-capping/PVC Conduit and accessories ISI marked of appropriate size/thickness on walls/other surface etc. complete all as specified and as directed. Make of Cable : HAVELLS/FINOLEX/POLYCAB. Make of Casing-Capping/PVC Conduit : Precision/Modi/Pressfit. NOTE : 1) Four runs of PVC wire, one run of earth wire & one run of casing-capping/conduit will be measured as one length. 2) Cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for surface sub-main wiring alongwith earth wire of size of 2 x 10.0 sq. mm + 1 x 10.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non- metallic rigid PVC medium grade Casing-capping/PVC Conduit and accessories ISI marked of appropriate size/thickness on walls/other surface etc. complete all as specified and as directed. Make of Cable : HAVELLS/FINOLEX/POLYCAB. Make of Casing-Capping/PVC Conduit : Precision/Modi/Pressfit. NOTE : 1) Two runs of PVC wire, one run of earth wire & one run of casing-capping/conduit will be measured as one length. 2) Cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.

Description all as per Item Sl No 8 above but of size/rating 2 x 6.0 sq. mm + 1 x 6.0 sq. mm earth wire.

Description all as per Item Sl No 8 above but of size/rating 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire.

Description all as per Item Sl No 8 above but of size/rating 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire.

S & F SPN DB, 12 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN012DD or techno-commercially equiv in LEGRAND/SIEMENS.

S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in LEGRAND/SIEMENS.

S&F MCCB, 4 pole,(63-80) A rating (Ics=100% of Icu),415Volts,36 KA Breaking capacity with adjustable overload & adjustable Short circuit setting complete all as specified & as directed by the Engr-in-Charge.Make: L&T, Cat No CM97919OOH2OG or techno-commercially equiv in Legrand/ABB/Siemens.

S & F,of MCB, DB, TPN, 04 ways, DOUBLE DOOR, IP-43, Ik-09 with metal door, rated bus bars, earth bar, neutral links complete including blanking plates as required and fixed flush to wall/other surface complete all as specified and as directed. Make : L & T, Cat No : DBVTM004DD or techno-commercially equivalent in Siemens/Legrand.

S&F, 4 Way,IP43,IK-09 Metal Double Door,TP&N vertical DB fitted with Busbar and blanking plates, Neutral link with 4 pole MCCB as Incomer and SP/TP MCBs as outgoings,without MCCB, flushing to wall/fixing inside enclosure and making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBVTL004DD or techno-commercially equiv in Legrand/ABB/Siemens.

Note for items No 12 to 16:- (i) The cost of concealing of DB and making good the disturbed surfaces is deemed to be including in the unit quoted rate.

S&F TP (3-Way) enclosure, IP-30 for independent mounting of MCB change-over switch (3M) fixed flush to wall/other surface complete all as specified and as directed. Cat No DBENC003SD of make L&T or techno-commercially equivalent of LEGRAND/SIEMENS

S&F MCB Double Pole, two way with centre-off changeover switch suitable for 230 V AC of rating 40 A complete. Cat No AUC00204000 of make L&T or techno-commercially equivalent of LEGRAND/SIEMENS

S&F TP (6-Way) enclosure, IP-30 for independent mounting of MCB change-over switch (6M) fixed flush to wall/other surface complete all as specified and as directed. Cat No DBENC006SD of make L&T or techno-commercially equivalent of LEGRAND/SIEMENS

S&F MCB Four Pole, two way with centre-off changeover switch suitable for 415 V AC of rating 63 A complete. Cat No AUC00406300 of make L&T or techno-commercially equivalent of LEGRAND/SIEMENS

NOTE FOR ITEM NO 17 & 20 : Makes of MCB TP Enclosure & MCB Change-over switch shall be the same.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make: L&T Cat No: AU10S10(06-32)3C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SP, C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA. Make: L&T Cat No: AU10S10403C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SPN, C-Series 240 Volts of capacity 40 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make: L&T Cat No: AU10S20403C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SPN, C-Series 240 Volts of capacity 50 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make: L&T Cat No: AU10S20503C or techno-commercially equivalent in LEGRAND/SIEMENS.

S & F MCB, TP, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed by Engr-in-Charge. Make : L & T, Cat No : AU10S30633C or techno-commercially equivalent in Siemens/Legrand.

S & F MCB, TPN, 10KA, 415V, "C" curve, 63 A, ISI marked complete all as specified and as directed by Engr-in-Charge. Make : L & T, Cat No : AU10S40633C or techno-commercially equivalent in Siemens/Legrand.

S & F MCB, TPN, 15KA, 415V, "C" curve, 100 A, ISI marked complete all as specified and as directed by Engr-in-Charge. Make : L & T, Cat No : AU15S41003C or techno-commercially equivalent in Siemens/Legrand.

Supply and laying in trenches/through pipes or bare in road crossings/ paths /drains /ducts /floors /along poles/ walls/ ceilings etc. Cable Under ground, Armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of cross sectional area, 4 Core 35 Sqmm incl connecting with suitable glands, lugs etc all as specified and directed by the Engr-in-Charge. Make: Havells/Gloster/Polycab

Supply, install, commissioning & testing IP-68,IK-07, LED Underwater Fountain Light, 24 V DC, 9W or next higher rating, CT=3000 K (Warm White), integrated type, surge suppressor/ protection & high brightness LEDs, high quality 304 stainless steel material housing and including 1.5 mtr UL Certified cable with suitable fixing arrangement complete all as specified and as directed. Make : Jaquar, Cat No : JQL-UWLB009W or techno-commercially equivalent in other make

Supply, install, commissioning & testing IP 68, 24 VDC, 200W Outdoor mounted, LED DRIVER, suitable for Underwater Fountain Light, 24 V DC, 9W integrated type with all accessories internally prewired, connecting up with fixing arrangments complete all as specified and as directed. Make : OBD/Hensel or techno commercially equivalent in other make. NOTE : LED Driver shall be made water-proof by enclosing the same inside water-proof (IP-68) enclosure as per actual/ground. In case of any technical issues, Contrs are requested to visit proposed site of work. Any issues/doubts raised after acceptance of Tender/Contract, shall not be agreed for & the decision of the Engr-In-Charge & GE shall be final & binding.

S & F in replacement PVC insulated flexible multicore round copper conductor cable of size 3 core 2.5 Sqmm including necessary end connector including taking down unserviceable cable complete all as specified and as directed. Make : Havells, Cat No: WHMFDSKB32X5 or techno-commercially equivalant in Finolex/Polycab/Gloster.

Supply , installation, commissioning and Testing of Servo controlled Voltage stablizer cap 200 KVA (confirming to BIS 9815 : Part 1 :1994 reaffirmed 2009) Three phase , 50 Hz Naturally oil cooled, outdoor unbalanced type copper wound metalic body duly powder coated with lifiting hooks four Nos , digital display type , Relay Free smooth and silent operation with Ist filling of Transformer oil (ISI marked) upto level having with following Specification :- Make - Vinitec /V Guard /Volina (Filter House) .

(a) Input Voltage 300V - 480V or as per ground requirement. (b) Output voltage stablized at any designed/desired voltage 415 ± 1.0% (adjustable) ( c) Rated frequency - 50 Hz (d) No distortion in wave form (e) Rsponse time not to exceed 10 Mille seconds (f) Sensitivity ( ±) 1% (g)Rate of correction 8 volt /second for single phase and 20 volt/ second for phase to phase (h) No load losses less than 0.5 % ( i)Full load losses less than 2.5 % (j)Duty cycle - continuous 24 X 7 (k) Efficiency more than 95 % (l)Type of load : 3 Phase unbalanced type (m) Digital display voltmeter/Ampmeter Optional Protection :- (a)Ingress Protection (IP) upto IP 42/ IP 45 (b)Over load cut- off and short circuit protection ( c)Low/High voltage cut off (d)By pass arrangement in any case of emergency (e)Single phase sequence change protection Note :- (a)Design/drawing/BOM of the Votage stablizer showing the dimensions is to be obtained from OEM / Auth Supplier & is to be got approved from the GE & Engr-In-Charge before placing final order to the manufacturer. (b) Quoted rate is deemed to be inclusive of Factory Inspection/Testing of the Votage stablizer before dispatch by an E/M Officer nominated by the Accepting Officer. ( c) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. (d) The complete installation, commissioning & testing of the Voltage stablizer is to be got done from the OEM or their auth Rep/Sister Concern/Channel Partners only. (e) Necessary PCC foundation/plinth shall be as per the recommendations of OEM & cost of the same is deemed to be included in the quoted rates.

Supply , installation, commissioning and Testing of Servo controlled Voltage stablizer cap 150 KVA (confirming to BIS 9815 : Part 1 :1994 reaffirmed 2009) Three phase , 50 Hz Naturally oil cooled, outdoor unbalanced type copper wound metalic body duly powder coated with lifiting hooks four Nos , digital display type , Relay Free smooth and silent operation with Ist filling of Transformer oil (ISI marked) upto level having with following Specification :- Make - Vinitec /V Guard /Volina ( Golf Pump Hose) .

(a)Input Voltage 300V - 480V or as per ground requirement. (b)Output voltage stablized at any designed/desired voltage 415 ± 1.0% (adjustable) ( c)Rated frequency - 50 Hz (d)No distortion in wave form (e)Rsponse time not to exceed 10 Mille seconds (f)Sensitivity ( ±) 1% (g)Rate of correction 8 volt /second for single phase and 20 volt/ second for phase to phase (h)No load losses less than 0.5 % ( i) Duty cycle - continuous 24 X 7 (j)Full load losses less than 2.5 % (k) Efficiency more than 95 % (l)Type of load : 3 Phase unbalanced type (m) Digital display voltmeter/Ampmeter Optional Protection :- (a)Ingress Protection (IP) upto IP 42/ IP 45 (b)Over load cut- off and short circuit protection ( c)Low/High voltage cut off (d)By pass arrangement in any case of emergency (e)Single phase sequence change protection Note :- (a) Design/drawing/BOM of the Votage stablizer showing the dimensions is to be obtained from OEM / Auth Supplier & is to be got approved from the GE & Engr-In-Charge before placing final order to the manufacturer. (b) Quoted rate is deemed to be inclusive of Factory Inspection/Testing of the Votage stablizer before dispatch by an E/M Officer nominated by the Accepting Officer. ( c) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. (d) The complete installation, commissioning & testing of the Voltage stablizer is to be got done from the OEM or their auth Rep/Sister Concern/Channel Partners only. (e) Necessary PCC foundation/plinth shall be as per the recommendation of OEM & cost of the same is deemed to be included in the quoted rates.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for taking out/laying of UG Cables, GI Pipe etc. and getting out in hard dense soil complete all as specified and directed .

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick with excavated soil complete all as specified and directed.

Removing of excavated material (Soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as speciofied and directed.

M&L for providing sand cushioning for protection of UG cable in trenches with Riddled Earth of approved quality as approved in writing by GE including filling, spreading and punning down to desired thickness complete and all as specified and directed by Engr-in-Charge.

Supply and laying sub class "B" bricks in trenches for protection of UG Cable with width equal to length of bricks, laid dry & flat complete all as specified & as directed.

M&L for cutting the existing hardstanding/PCC/WBM road at a depth of not less than 60 cm & 30 cm in width for passing of LT cables through GI pipes, returning filling in, complete incl finishing the surfaces by providing cement concrete type B1 (1:2:4) with 20 mm graded aggregate upto 20 cm, finishing to a uniform smooth surface complete all as specified and as directed.

NOTE for Item Nos 34 & 39 : Any damages made to the existing services of MES/WCB/TNEB/Other Depts like HT/LT UG cables, Water Supply/Sewage Pipe lines, OFC/BSNL/ITRC/Signal communication cables etc. during the excavation/boring/road cuting etc. progress of the work shall be made good with proper jointing kits etc. as per original to the entire satisfaction of Engr-In-Charge & GE & the cost of the same is deemed to be included in the unit quoted rates. Decision of the AO shall be final & binding.

Supply and laying GI pipe light grade (ISI Marked) of size 80 mm for cable protection to be fixed on wall /pole /road crossing with necessary clamps complete all as directed and specified by Engr-in-Charge.Make: TATA/Jindal/Prakash

Supply , laying and Testing cable XLPE insulated , screened, PVC beded galvanized steel strip or wire armoured electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 Sq mm 3.5 core and all as specified and directed by Engr In-Charge.

Supply , laying and Testing cable XLPE insulated , screened, PVC beded galvanized steel strip or wire armoured electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 Sq mm 3.5 core and all as specified and directed by Engr In-Charge.

M&L for earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to GI earth strip 32 x 6 mm by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with suitable funnel and wire mesh, 40 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed by the Engr-in-Charge/GE.

M&L for mild steel work for posts, purlines, rufter etc. incl. necessary drilling, bolting or rivetting etc. & similar work confirming to Fe-290 Gde E-165 complete all as specified & as directed by the Engr-In-Charge.

M&L for PCC 1:2:4, type B1 with 20 mm graded aggregate as in platform / floor complete all as specified & as directed by the Engr-In-Charge.

M&L for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of approved colour having tensile strength of 550 Mpa as in roof covering/cladding to wall etc. fixed with self tapping screws complete all as specified & as directed by the Engr-In-Charge. Make : JSW/TATA

M&L for painting of new steel surfaces of any description, over a 10 cm in width or girth, not otherwise described with 2 coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & as directed by the Engr-In-Charge.

M&L for MS angle iron post & struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire etc., flat iron fillets for securing wire mesh conforming to Fe-290 E-165 incl painting with one coat of red oxide primer & two coats of aluminium paint complete all as specified & as directed by the Engr-In-Charge.

Supply , installation, Testing and Commissioning of Out door LT Automatic Power Factor Correction (APFC) Panel for 3 phase , 415 V & 50 HZ system capacity 15 KVAR with incoming MCCBs CPRI approved , weather/vermin proof, made out of 3.15 mm thick CRCA sheet, factory assembled modular and non comprtmentalized construction, outdoor type mounted on PCC platform 45 Cm above GL on suitable size with front side hinged double door with locking arrangement, duly powder coated with Aluminium bus bar Multistranded copper cables of appropriate size for each feeder of with 10 - step APFC Relay comprising of following all as directed by Engr-in - Charge :- Make : ABB/Siemens/L&T

(i)MCCB, 63- 100 Amp, 4 Pole 25 KA -01 Nos (ii)MD-XL capacitor 440 V of following rating with heavy duty capacitor switching contractor :- (a)2 KVAR with 10 kA MCB & Capacitor duty contactor - 02 Nos (b) 3 KVAR with 10 kA MCB & Capacitor duty contactor - 02 Nos (c)4 KVAR with 10 kA MCB & Capacitor duty contactor - 01 Nos (iii)Microprocessor based intelligent power factor 8 Sep realy with RS 485 Port type RVT of ABB (iv)CONTROL COMPONENTS (a)CTR : 100/5A, CL : 1.5 VA-03 Nos (b) Digital Multi meter to measure Volt, Amp and PF-01 Nos (c)Indication Lamps for RYB (LED Type) -03 Nos (d)Out going indication Lamps (LED Type) - ON/OFF -10 Nos

Supply, laying, jointing & testing XLPE insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core in trenches / through GI pipe / fixed along with pole structure etc with all fixing & connecting accessories incl taking down old cable complete all as specified & as directed. Make : HAVELLS/GLOSTER/POLYCAB. Note :- Necessary earthwotk, PCC etc shall be measured & Paid separately under relevant items of works

Description all as per Item Sl No 50 here in above but of size 70 Sqmm 3.5 core.

S & F 32 X 6 mm galvanised iron strip as earth continuity incl connection complete with the help of chromium plated washers nuts etc

M&L for boring under road manually with labour suitable for inserting upto 80 mm bore pipe at a depth 0.75 to 1.0 mtr complete.

Supply, install, testing & commissioning of LT control panel board "out-door type" of size 1200 mm (height) x 900 mm (breadth) x 500 mm (depth) (minimum dimensions), factory fabricated CPRI approved (type-tested) with suitable neoprene rubber gasket to make it completely dust & vermin proof & degree of protection not less than IP-55 & general construction confirming to IS-13947, double door, front & back openable. The panel shall be provided with ventilation facility in the form of louvers for better heat dissipation & high grade aluminum bus-bar wrapped with coloured PVC tape /sleeves of rating in conformity to the Incoming ACB/MCCB rating. The panel board shall be fabricated out of 3.15 mm thick (for outer portions) & 2.00 mm thick (for inner portions) CRCA sheet duly pre-treated & powder coated, supporting angle iron frame & MC channel base suitable for 3 Phase, 4 wire system 415 /440 volts grade including complete internal wiring with not less than 2.5 Sqmm copper wire including cable glands of suitable sizes with suitable PCC (1:3:6) type C-2 foundation , necessary earthwork (if any) incl taking down old unsv LT panel of any size/type complete all as specified & as directed with & including the following accessories :-

(DUNMORE HOUSE) (i) BUS-BAR & INTERNAL CONNECTIONS : The bus-bars shall be made up of 04 Nos high grade Aluminium 200 Amps rated, duly insulated with 1100 Volts grade standard colour coded PVC sleeves & rigidly mounted on suitable sized "F" class insulators of non-hygroscopic, non-combustible, all internal connections from main bus-bars to switch gears etc. PROVISION FOR CABLE ENTRY : The provision for cable entry /exit shall be provided in the bottom for both incoming & out-going cables with the help of glands matching the existing LT cable sizes. INCOMING : (a) MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 80 to 100 A - 01 Nos. Make : L & T, Cat No : CM91712OO KOOG or techno-commercially equivalent of Legrand /Siemens.

OUTGOINGS : (a)MCCB 4 Pole (Ics = 100% Icu) with thermal magnetic release, adjustable short circuit & adjustable overload setting, suitable for isolation, having breaking capacity 25 KA & of rating 50 to 63 Amps - 02 Nos (1W+1S) Nos. . Make : L & T, Cat No : CM91712OOHOOG or techno-commercially equivalent of Legrand /Siemens. (b) Time switch 415 Volts, 3 Phase of 20 Amps rating with Contactor complete . Make : L&T, Cat No (AUTS02DIG00- timer, CS94190-contactor) or techno-commercially eqvt of Legrand /Siemens. (c) MCB TPN "C" series having breaking capacity 10 KA of rating 06 to 32 Amps - 02 No.Make : L&T /Legrand /Siemens.

M&L for GI pipe light grade with all running fittings (ISI Marked), laid in trenches, under road or fixing on wall/pole/crossing drain/nallah etc. of bore 50 mm complete all as specified and directed. Make : TATA/JINDAL/PRAKASH. Note : Wherever GI Protection pipes are to be placed/fitted above earths surface, cost of necessary clamping/fixing arrangements to the entire satisfaction of Engr-In-Charge is deemed to be included in the unit quoted rates.

Supply, install, commissioning, testing & including before test and after test NABL Acct Lab of retofitted Emission Control /Eqpt/Devices (RECD) into 125KVA CPCB-I DG Set installed at Production Dept Sub Stn so as to facilitate emission limits for DG set already in use as per latest standards laid down by National Green Tribunal ( NGT) Central Pollution Control Board (CPCB), Ministry of Enivronment & Forests, GOI complete all as specified & to the entire satisfaction of GE & Engr-In-Charge Cat No BEE00005 of make M/S Brooks Enviro Engineering Pvt Ltd ot techno commercially equivalent

Supply, install, commissioning, testing & including before test and after test NABL Acct Lab of retofitted Emission Control /Eqpt/Devices (RECD) into 200KVA CPCB-I DG Set installed at Production Dept Sub Stn No.02 so as to facilitate emission limits for DG set already in use as per latest standards laid down by by National Green Tribunal (NGT) Central Pollution Control Board (CPCB), Ministry of Enivronment & Forests, GOI complete all as specified & to the entire satisfaction of GE & Engr-In-Charge Cat No BEE00009 of make M/S Brooks Enviro Engineering Pvt Ltd ot techno commercially equivalent

NOTE: (a) The complete wk/job supply installation &, installation commissioning & testing of the Retrofitted Emission Control /Eqpt/Devices (RECD) has to be got executed by any firm/company having type approval & or having confomity of production verification compliances process out of the 05(Five) agencies by the Nodal Agency Central Pollution Control Board (CPCB) . Necessary test certificates, approvals etc in this regard has to be submitted to the Engr-In-Charge at the time of Make/Sample Approval (b)After Satisfactroy completion of the wk/job of installation & nstallation commissioning & testingof the Retrofitted Emission Control /Eqpt/Devices (RECD) the Emission limits have to be tested from Govt/NABL accredited lab & necessary tect certificates etc. In this regard have to be submitted to the Engr-in-Charge & the cost of the same is deemed to be included in the unit quoted rates in the event of the test repots/results not found satisfactory w.r.t the stipulated Govt standards, the subject RECD eqpt have to be replaced & re-tested till the results are satisfactroy & as per the prevalent standrards

Any items/spare missed out in the techinical specification, however, esentially required for sucessful commisioning of the RECD eqpts is demed to be included in the unit quoted rates. Control/Firm is required to visit the site of work for any doughts/calrifications w.r.t specifications/works ivolved etc before quoting of the tender. Any query/clarifications etc after contract shall NOT be entartained & decisison of the AO shall be final & binding

rvelectricals