Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.5 LAccepted-AOC | L1 | Accepted-AOC Awarded being lowest bidder | |
| 2 | L2₹25.9 L+₹4.5 L (20.8%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹26.2 L+₹4.7 L (22.2%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹30.0 L+₹8.6 L (40.1%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹31.7 L+₹10.2 L (47.8%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
24 May 2021, 6:00 pmClosed
Garrison Engineer (N) Ahmednagar
Military Engineer Services Garrison Engineers (North) Nagar Pathardi Road Ahmednagar Fort Ahmednagar 414 002
Repairs Replacement of light fittings Rewiring with connected accessories for units under HQ AC C S including KK Ranges GE North Ahmednagar
2021_MES_436605_1
8523/E8
Open Tender
Miscellaneous Works
Item Rate
270 days
GE (N) Ahmednagar
Class D b (i)
8 documents required · 8 mandatory
₹500
Yes
Garrison Engineer North Ahmednagar
₹70,000
Yes
2 Jun 2021
16 Apr 2021
27 May 2021
16 Apr 2021
24 May 2021
10 May 2021
Amount
Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed by Engineer-in-Charge
M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn through and including PVC casing & capping with necessary accessories with PVC boxes (Module upto 18 Module from Model No.6890 07 to 6890 12 of legrand ) & white plates with frame (Suitable Module upto 18 Module from Model No.6732 11 to 6732 58 of Make Legrand ) housing of switches sockets / fan regulator etc. including 1.5 Sqmm single core solid multitranded copper conductor FRLS 1100 volts grade PVC insulated and unsheathed cable as earth continuity conductor to common earth & connecting to earth dolly for the following :- (Note :- The cost of Mudular mounting boxes and modular plates is included in the quated rates)
(a) One light point controlled by one, one way switch single pole.
(b) One Fan point controlled by one, one way switch single pole.
(c) One bell point controlled by one bell push on independent board.
(d) One 3 pin 5 Amps socket out let on independent board
(e) One 3 pin 5 Amps socket out let on Sameboard
(f) One light point controlled by one, two way switch single pole.
All as per item No 2 (here-in-before) but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.
M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn through and including PVC casing & capping ISI Marked with necessary accessories with and provision of PVC boxes by using CP machine screw for housing of switch / fan regulator etc. including 1.5 Sqmm single core solid multitranded copper conductor FRLS 1100 volts grade PVC insulated and unsheathed cable as earth continuity conductor to common earth & connecting to earth dolly for the following :-
(a) One light point controlled by one, one way switch single pole.
(b) One Fan point controlled by one, one way switch single pole.
(c) One bell point controlled by one bell push on independent board.
(d) One 3 pin 5 Amps socket out let on independent board
(e) One 3 pin 5 Amps socket out let on Sameboard
(f) One light point controlled by one, two way switch single pole.
All as per item No 10 (here-in-before) but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.
S & F 6 A one-way SP switch - 1 module of Make Legard Cat No: 6755 01 or equvalent in Simens / Carbtree all as specified and directed.
S & F 6 A two-way SP switch - 1 module of Make Legard Cat No: 6755 02 or equivalent in makes mentioned in list of makes in Appendix `C'.
S & F 16 A one-way SP switch - 1 module of Make Legard Cat No: 6755 11 or equivalent in makes mentioned in list of makes in Appendix `C'.
S & F 6 A 3 pin universal socket 2 modules of Make Legard Cat No: 6734 52 or equivalent in makes mentioned in list of makes in Appendix `C'.
S & F 6/16 A socket 3 Pin 2 modules module of Make Legard Cat No: 6734 55 or equivalent in makes mentioned in list of makes in Appendix `C'.
S & F 6 A one-way SP bell push - 1 module SP switch - 1 module of Make Legard Cat No: 6755 04 or equivalent in makes mentioned in list of makes in Appendix `C'.
S & F Fan regulator 100 W with 2 module of Make Legard Cat No: 6755 30 or equivalent in makes mentioned in list of makes in Appendix `C'.
S&F switch piano flush type 230/250 Volt, 5 Amps single pole one way etc complete all as specified and directed by Engineer-in-Charge.
All as per above item No 7 but two way switch etc complete all as specified and directed by Engineer-in-Charge.
S & F bell push, switch flush type, 5 Amp etc complete all as specified and directed by Engineer-in-Charge.
S & F fan Regulator switch type- Dimmer on the existing phenolic laminated etc. as reqd single pole 240 volts grade 100 watts heavy duty ISI marked etc complete all as specified and directed by Engineer-in-Charge
S&F switch socket combination multi purpose 2 in 1, 6 pin 5 Amps, flush type, ISI marked etc complete all as specified and directed by Engineer-in-Charge
S&F switch socket combination 5 in 1 ,5Amp/15 Amp, flush type, ISI marked etc complete all as specified and directed by Engineer-in-Charge
S&F bell, AC, 230 Volts, single pole etc complete all as specified and directed by Engineer-in-Charge
S&F ceiling rose surface bakelite three terminal etc complete all as specified and directed by Engineer-in-Charge
S&F Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings etc complete all as specified and directed by Engineer-in-Charge
S & F in replacement double door Sheet metal enclosures factory made DBs 4 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 10 or equivalent in makes mentioned in list of makes in Appendix `C'
S & F in replacement double door Sheet metal enclosures factory made DBs 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in makes mentioned in list of makes in Appendix `C'
S & F in replacement double door Sheet metal enclosures factory made DBs 4 way , 415 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 70 or equivalent in makes mentioned in list of makes in Appendix `C'
S & F MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) (Note :- Make of the isolator should be the same as that of DB) for the following :-
(a) MCB Single Pole of 240 volts 5-32 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4085-87 to 90,92,93,94,95 or equivalent in makes mentioned in list of makes in Appendix `C'
(b) MCB Single pole + Neutral 240 volts, 32 -63 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4086-17 to 20 or equivalent in makes mentioned in list of makes in Appendix `C'
(c) MCB Triple pole + Neutral 415 Volts ,40 -63 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4086-81 to 83 or equivalent in makes mentioned in list of makes in Appendix `C'
Taking down Existing tube light fitting & Supply & fix Ultra slim LED Batten fitting 20 watt with minimum 2000 lumen output with 6500 K including connecting up with thre core twisted flexible copper conductor cable with suitable size from ceiling rose to fitting all as directed by the Engr-in-Charge. Make ; Havells E-LITE LED PRIDE PLUS NEO Cat No LHEXACP71N1W020) or equivalent in makes mentioned in list of makes in Appendix `C'
S&F Inverter LED batten with square profile and polycarbonate channel.lithium ion battery with charging time 8-10 hours and back up time upto 4 hrs with LED light source 6500 K with uniform light output, with all accessories including its connection with 2 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge Make :Havells Cat Part NoLHEXACP7FN1Wo10/ equivalent in makes mentioned in list of makes in Appendix `C'
Taking down existing Tube light fittings /CFL light fitting of any type and any wattage for repair and re-fixing the same after repairs to its orginal position including replacement of cable PVC insulated unsheathed with copper conductor of size 1.5 Sqmm (2 runs) upto 0.5 mtr length from light fitting to Ceiling rose including connections etc complete all as specified and directed by Engineer-in-Charge
Taking down Existing tube light fitting & Supply & fixubg Linear & compact 10 W mirror light with 1000 Lumen outpot with 4000K decorative grey end caps, polycarbonate body and ribbed opal diffuser etc complete all as specified and directed by Engineer-in-Charge.
Taking down Existing tube light fitting & Supply & fix Green LED Ultima fitting minimum 9 watt with 900 lumen out put including connecting up with thre core twisted flexible copper conductor cable with suitable size from ceiling rose to fitting etc complete all as specified and directed by Engineer-in-Charge
Taking down Existing tube light fitting & Supply and fix in replacement 40 Watt with minimum 3100 lumen output with 6500K LED edge - lit luninaire suitable for armstrong / grid ceiling complete with separate electronic driver all as specified and direcrted by Engineer-in-Charge. Make : Philips Cat Part No RC 40 W LED 345-65003100lm of or equivalent in makes mentioned in list of makes in Appendix `C'
S&F in replacement energy saving and environmental friendly long life LED street light 25 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge. Make -Havell's Cat Part: (ENDURAPEARLSL25W MP) ENDURAPEARLSL25WLED757SASYTOPCMP or equivalent in makes mentioned in list of makes in Appendix `C'
Taking out old building security light ( HPSV/Tube light fitting) & S & F LED bldg security light minimum 30 Watt with minimum 3000 lumens with 6500K and New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LED as light source of capacity 25W LED 5000K of Make Havells Cat No.LHEWDRP7PN1W025 or equivalent in makes mentioned in list of makes in Appendix `C'
M&L in replacement for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through PVC Casing Caping and 2.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete etc complete all as specified and directed by Engineer-in-Charge (Note : Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)
M&L in replacement for sub main wiring with three runs of PVC insulated and unsheathed FRLS cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 10 Sqmm single core, copper conductor drawn through PVC conduit of suitable size and one run 6 Sqmm single core multistanded copper conductor FRLS PVC insulated and unsheathed cable 1100 Volts grade, ISI marked as earth continuity wire complete etc complete all as specified and directed by Engineer-in-Charge (Note : three runs of conductor with one run of earth wire and PVC conduit will be measured and paid as one unit).
Supply and fix in replacement industrial type switch socket for Geysers with 20 Amps MCB Make:- Iengard Cat No.6078 41 20 A SP complete or etc complete all as specified and directed by Engineer-in-Charge
M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :-
(a) LT cable10 Sqmm, 4 core.
(b) LT cable 6 Sqmm, 4 core.
(c) LT cable 6 Sqmm, 2 core.
(d) LT cable 4 Sqmm, 2 core.
S & F in replacement LED Batten Suitable for retrofit LED tube 20 watt ,single side connection etc complete all as specified and directed by Engineer-in-Charge
Taking down/out unserviceable tube light fitting, of any type,make, position/location including choke, starter etc and making arrangements for the addition/alteration to existing tube light for fixing the Ultra bright LED polycarbonate Tubelight 20W of Make ; Havells E-LITE LED PRIDE PLUS NEO Cat No LHEXACP71N1W020) or its equivalent CAT part of make Philips / Wipro.with very high efficacy suited for installation in existing T8 tubelight with G13 lamp holders to give glare free light etc complete all as specified and directed by Engineer-in-Charge
Taking down/out unserviceable CFL Fitting 2 x 36,3 x 36 Watt , of any type,make, position/location including choke, starter etc and making arrangements for the addition/alteration to existing CFL light for fixing the Ultra bright LED polycarbonate 20W of Make Havells/ Philips /Wipro with very high efficiency suited for installation in existing 2G11 lamp holders to give glare free light etc complete all as specified and directed by Engineer-in-Charge
M & L for Earthing complete with galvanized steel earth plate electrode 60x60cm x 6.0 mm thick buried directly in ground ( earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to and including galvanised earth lead wire 4.0 mm dia,by means of nuts,bolts,checknuts and washers of galvanized iron including 15 mm bore GI pipe,medium grade up to 7.5 meters long all as shown in electrical plate No.3 of MES SSR part-I and testing on completion including excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber,precast RCC slab 50mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM,( weight not less than 4 Kg/Sqm), with cast iron frame, funnel with wire mesh,GI watering pipi 20 mm dia medium grade,test point and lugs complete. NOTE:-(i) Items includes the cost of 7.5 metre length GI pipe and earth lead for protection of earth lead.Any variation in length shall be adjusted through deviation order.(ii) On testing,if the earth resistance is not obtained,earthing will be regenerated at no extra cost till the desired earth resistance is obtained.
Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge
Returnig, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc complete all as specified and directed by Engineer-in-Charge
Removing exacavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge
Supply &lay HDPE pipe 40 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge
S&F 42 Watt LED Panel 2X2 environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for armstrong/Grid ceiling, complete with separate electronic driver ceiling light 42 Watt with and including connecting up with & including twin core, twisted, flexible copper conductor cable of suitable size 230 Volt, 50 HZ etc complete all as specified and directed by Engineer-in-Charge Make: Havell's Cat No: (PLUTO NEO PANEL 2X2) PLUTONE02X2PLR42WLED857S or equivalent in makes mentioned in list of makes in Appendix `C'
An amount of Rs 87,486.00 shall be deducted from BOQ on account of schedule of credit
Ms. S.K. ASSOCIATES
M/s Renuka Enterprises
R. T. Saluji
KAMINS CARE
SKS Electricals
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .