Construction of Senior Citizen Community centre at Nakei Padia in Ward No.37.

Earth work excavation in foundation in all kind of soil within 50m. Initial lead and 1.5m. Initial lift icluding rough dressing and bracking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m. in depth and as per the direction of the EIC.15

Fine dressing of earth work in ordinary or hard soil in road formaton according to the direction of the department including cutting or filling earth upto 0.15 m depth of surface. 16

Providing spreading, filling in foundation and plinth with sand watered and rammed as per OPWD specification including cost of materials, labour, conveyance, royalty, Tools and Plants etc all complete required for the work to finished items of work. 18

Cement concrete (1:3:6) with 40 mm size hand broken hard granite metal including cost of materials, labour, conveyance, royalty, Tools and Plants water for curing etc.all complete as per OPWD specification required for the work to finished items of work. 37

Fly ash bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than 75 Kg/cm2 in cement mortar (1:6) in foundation and plinth including cost of materials, labour, royalty, conveyance, Tools and Plants, water for curing etc. all complete as per OPWD specification required for the work to finished items of work. 95

Fly ash bricks 25 cm x 12 cm x 8 cm size having crushing strength not less than 75 Kg/cm2 in cement mortar (1:6) in super structure including cost of materials, labour, royalty, conveyance, Tools and Plants, water for curing etc. all complete as per OPWD specification required for the work to finished items of work. 96

Cement concrete work of M20 grade with 20 mm and down grade crusher broken hard granite chips including hosting and laying, cost of materials, labour, conveyance, royalty, tools and plants, water for curing etc.all complete as per OPWD specification required for the work to finished items of work. 57

Requirement of HYSD/ MS rod & labour for cutting, bending, binding, straighting and laying the grills and placing in position including cost of rod & binding weir 18 to 20 gauge. 62

Rigid and Smooth centering and shuttering for RCC works including false work and dismentalling then after casting including cost of materials complete in ground floor.64 RCC foundation, plinth band and footings bases of columns mass concrete pre-cast slabs etc 67

RCC Lintel 69

RCC beams, column, grider and bressmer, etc 68

RCC floor and roof slabs, landings,balconies, projecting sun shades and chajjas 65

RCC walls and fins including attached pillasters 70

Supplying, fitting and fixing vitrifed tile in floors of size 600mm x 600mm of approved make conforming to IS : 13755 laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand ) and filling joints with white cement of approved qualiy including cost of all materials, labour T&P etc required for the work all complete as per direction of EIC. 273

Fixing Vetrified tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. 132

12mm thick cement plaster (1:4) over brick work with cement punning for skirting 177

12mm thick cement plaster in cement morter(1:6) including cost of rayality, conveyance etc all complete 179

6 mm thick cement plaster in cement morter (1:4) including cost, rayality, conveyance etc all complete 174

12 mm thick CP (1:4 ) over brick work including cement punning and bituman painting including cost of conveyance royalty etc. all complete. 178

2.50 cm thick grading concrete gradient (1:2:2) on roof slab with 6 mm size hard broken granite chips on new works including cost of conveyance royalty etc. all complete. 41

Filling in foundation and plinth with excavated materials including watering and ramming as directed by the EIC. 18

Finishing surface of walls with cement based wall putty (water based) and wall primer of approved make and finished smooth and even surface to receive cement paint water bound including cost of caffolding staging charges with cost of all materials taxes, labour T&P etc complete. 280

Finishing walls with water proofing weather coat paint of approved shade two coats to give an even shade including cost of paint and labour etc all complete. with approved paint and primer, cost of labour and materials ect. all complete. 153

Finishing walls with two coats water proofing weather coat of approved make including cost of caffolding staging charges with cost of all materials taxes, labour T&P etc complete. 158

Painting two coats with approved paint and primer including cost of labour and materials ect. all complete. 151

Labour for fitting and fixing of MS window grills as per approved design including cost of all materials complete and directon of EIC. 296

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost of conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. 279

Providing, spreading, laying on road surface and compacting, proper camber layer of paver inter locking blocks minimum 60 mm thickness and inscribed machine mixed and compacted having crushing strength not less then M30 including filling the interstices with sand, watering, brooming, bliding and consolidation with wooden hammer as per OPWD specification and relevent code including cost of materials, conveyance, royality, labour, cess, T&P required to the work etc. complete to finished items. 95

Requirment of MS door, window & grill and its cost etc 298 30 kg/sqm

30 kg/sqm

40 kg/sqm

Requirement of PVC/ Aluminium cum ACP sheet Door

3.2.5- Providing and laying in trenches unplasticised PVC pipes confirming to IS-4985/ 2000 of class III (6 kg/cm2) of the following nominal bore and pipe fittings including testing as per specification complete (E/W in trenches to be measured paid for separately) 390

3.2.5- Providing and laying in trenches unplasticised PVC pipes confirming to IS-4985/ 2000 of class III (6 kg/cm2) of the following nominal bore and pipe fittings including testing as per specification complete (E/W in trenches to be measured paid for separately) 390

3.3.2- Providing and fixing on wall face unplasticised rigid PVC soil, waste and rain water pipes conforming to IS:13592 type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 420

3.2.7- Providing and laying in trenches PVC pipes confirming to ASTM-D-1785/ 89 (Sch-80) of the following nominal bore and pipe fittings including testing as per specification complete (E/W in trenches to be measured paid for separately) 391

3.2.7- Providing and laying in trenches PVC pipes confirming to ASTM-D-1785/ 89 (Sch-80) of the following nominal bore and pipe fittings including testing as per specification complete (E/W in trenches to be measured paid for separately) 391

3.1.4- Providing and fixing to wall or ceiling and floor PVC pipes class conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. 365

3.1.8- Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS:12701-1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extras ockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the EIC. 367

Construction of brick masonary work stagging of syntex with brick work in cm (1:6), plastering in cm (1:4) and cement puuning including all cost, taxes, royalty, conveyance etc all complete.

3.1.10- Supplying all materials, labour and T&P for cutting holes through existing brick work including making good to the same in cement mortar (1:4) for taking GI/ PVC pipes and fitting. 368

3.1.11- Supplying all materials, labour and T&P for cutting holes in RCC floors and roofs upto 19 mm thick including making good and leak proof for taking GI pipes/ PVC pipes and fittings. 369

3.1.12- Supplying all materials, labour and T&P for cutting grooves in pucca floor and walls for taking GI pipes and fittings/ PVC pipes and fitting and making good to the damages. 370

3.2.13- Fixing ferrule conforming to IS:2692-1978 of 15 mm dia nominal bore including drilling the water main (Cast Iron pipes or pipes with the metal straps) as per Specification complete. 393

3.2.14 (vi)- Fixing of 15 mm dia CP brass screw down long body bib cock (Tap) polished bright confirming to IS 781-1995 of the following nominal size as per specification complete 394

3.2.14 (vii)- Fixing 15 mm dia CP Flange polished bright confirming to IS 781-1995 of the following nominal size as per specification complete 395

3.2.14 (viii)- Fixing of 15 mm dia CP extension piece 25 mm long polished bright confirming to IS 781-1995 of the following nominal size as per specification complete 396

3.2.14 (viii)- Fixing of 15 mm dia CP extension piece 25 mm long polished bright confirming to IS 781-1995 of the following nominal size as per specification complete 396

3.2.16 (vii)- Fixing of 15 mm dia brass or CP screw down angle stop cocks / conceated stop cocks /angle stop cocks confirming to IS 781-1995 of the following nominal size as per specification complete 399

3.2.16 (vii)- Fixing of 15 mm dia brass or CP screw down angle stop cocks / conceated stop cocks /angle stop cocks confirming to IS 781-1995 of the following nominal size as per specification complete 399

3.2.17- Fixing of brass ball valve (Horizental plunger type) confirming to IS 1703-1977 as per specification complete.

3.4.4- Fixing Wash down water closet ( European type WC ) with intigral 'P' or 'S' trap confirming to IS 2556:Part 8-2004 to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement morter (1:1) etc all complete as per specification (Seat and cover to be measured and paid for separately) 441

3.4.5- Fixing plastic seat and cover for wash down water closet with chromium bress hinges and rubber buffers all complete as per specification. 442

3.4.11- Fixing wash basin with hole for Piller Taps confirming to IS 2556:Part 4-2004 with Cost iron or M.S brackets painted while including cutting holes in walls and making good the damages etc all complete as per specification. 446

3.4.20- Fixing PVC waste pipe of semi rigid PVC waste pipe 32 mm dia with length not less than 700 mm with PVC waste fittings nominal diameter for wash basin or sink including brass check nut complete as per specification 447

3.4.21- Fixing of 15 mm dia pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of the following nominal bore as per specification 448

3.4.22- Fixing 15 mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification 449

3.4.23- Fixing Chromium Plated brass waste of the following nominal diameter for wash basin and sink as per specification 450

3.4.24- Fixing Chromium Plated Brass Shower rose with15 mm or 20 mm inlet including polishing all complete as per specification. 451

3.4.26- Fixing 600 mmx 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or ply wood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification. 452

3.4.27- Fixing standard sized glass- shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification. 453

3.4.30- i) Fixing (a) Liquid Soap Container– Glass containeror Plastic container with Chromium Plated brass lid and brackets fixed to wooden plugs with Chromium Plated brasss crews or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screwsor (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification. 455

4.1.1- Providing and laying in trenches UPVC pipe class III (6kg/cm2) 75 / 110 mm dia ODPVC as sewer line and alinging to requisite gradients inside the trench, jointing with solvent cement cement with 0.08 mt sand filling in bed, 0.10 mt CC (1:4:8) using 40mm size hbg metal in bed and 466

4.2.10- Supplying all materials, Labour, T&P, for construction of Inspection Chamber of size 0.75 m x 0.75 m, 0.65 m deep with 100 mm thick cement precast RCC slab in CC (1:11/2:3), 100 mm thick sand filling in foundation, 150 mm thick CC (1:3:6) using 40 mm size hbhg metal in foundation, KB brick masonry in CM (1:4) using 25 cm size brick, inside plaster 12 mm thick in CM (1:4), neat cement punning, outside plaster in CM (1:3), CC (1:2:4) with neat cement punning for benching, channeling and brick wall top including earth work in excavation, earth filling with excavated earth to outside cavity of chamber etc complete. 477

4.2.10- Supplying all materials, Labour, T&P, for construction of Inspection Chamber of size 0.75 m x 0.75 m, 0.65 m deep with 100 mm thick cement precast RCC slab in CC (1:11/2:3), 100 mm thick sand filling in foundation, 150 mm thick CC (1:3:6) using 40 mm size hbhg metal in foundation, KB brick masonry in CM (1:4) using 25 cm size brick, inside plaster 12 mm thick in CM (1:4), neat cement punning, outside plaster in CM (1:3), CC (1:2:4) with neat cement punning for benching, channeling and brick wall top including earth work in excavation, earth filling with excavated earth to outside cavity of chamber etc complete. 477

3.3.3- Providing and fixing on wall face UPVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving10 mm gap for thermal expansion (i) Single socketed pipes. 421

3.3.3- Providing and fixing on wall face UPVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving10 mm gap for thermal expansion (i) Single socketed pipes. 421

3.3.3- Providing and fixing on wall face UPVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving10 mm gap for thermal expansion (i) Single socketed pipes. 421

3.3.3- Providing and fixing on wall face UPVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving10 mm gap for thermal expansion (i) Single socketed pipes. 421

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer. 490

Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250V piano type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer. 490

Recessed wiring to sub-main along with the following size of PVC insulated single core multistrand copper condocter ISI marked in 20 mm dia non metalic heavy duty flexable condoct 1.6 mm in PVC conduct as requried (make-of wire Anchor/ Finolex/L&T/ Havells/ V Guard) 491

Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked co

nfirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/ L&T/ Anchor/ Havels/ V Guard) 491

Point wiring for 5/ 6 amp socket outlet with 2 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess 20 mm dia non-metalic PVC flexible conduit with piano type switch, phenolic laminated sheet suitable size ISI marked MS box and earthing point with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc. as required. ( Make of wire Finolex/ L&T/ Anchor/ Havels/ V Guard ) 493

Supplying and fixing of Call Bell/ Buzzer ISI marked suitable for DC/AC single phase 230 volts complete as required. 500

Earthing with GI pipe 3 mtr long 40 mm dia ISI marked including accessories and providingmasonry with cover plate having locking arrangement and watering pipe including charcoal and salt as required. 502

Extra for using salt and charcoal for GI or copper plate earth as required 503

S/ F 63 amp mainswitch wall mountened 505

S/ F 63 amp mainswitch wall mountened 505

Installation Testing and Commissining celling fan, axhaust fan including wiring the dawn roads of standared length (upto 30 cm) with 1.5 sq mm FR PVC insulated single core multiatrand copper conductor etc.as required. 514

Installation Testing and Commissining celling fan, axhaust fan including wiring the dawn roads of standared length (upto 30 cm) with 1.5 sq mm FR PVC insulated single core multiatrand copper conductor etc.as required. 514

Supplying, fitting and fixing of following materials 516