SPECIAL REPAIR TO MULTIPURPOSE HALL AND ADDN/ ALTN TO MEDICAL AT KV NO. 2 AIR FORCE STATION SRINAGAR

Amount

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, all as specified.

M&L for brick work with sub class 'B' Bricks (using old size bricks), straight or curved on plan exc 6 m mean radius, built in CM 1:4, complete all as specified and directed.

M&L for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:6), all as specified.

Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified.

M&L for 15mm thick rendering on brick or concrete wall surfaces in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified.

M&L for 5mm thick rendering on concrete surfaces of ceiling, in cement mortar 1:3, finished even and smooth without using extra cement, complete all as specified.

M&L for applying 2 mm thick cement base wall care putty on wall surfaces, all as specified & directed.

M&L for applying 2 mm thick cement base wall care putty on ceiling surfaces, all as specified & directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over one coat of primer, all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of weather proof acrylic emulsion paint over one coat of primer in camouflaging pattern as approved, all as specified.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over one coat primer in camouflaging pattern as approved, all as specified.

M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper, over one coat of primer, all as specified.

M&L for complete removal of existing treatment from the old painted surfaces of walls with scrapping / sand papering and with mechnicle sanders having mechanical vaccume machine with bag for collection of dust, to make the surfaces even and smooth, all as specified and directed.

M&L for complete removal of existing treatment from the old plastered surfaces of ceiling with scrapping/sand papering with the help of mechanised sanders having mechanical vaccume machine with bag for collection of dust & to make the surfaces even and smooth, all as specified and directed.

M&L for applying two coats of oil bound distemper on old treated surfaces of ceilings over a coat of primer, all as specified.

M&L for preparation of old painted wall surface and applying two coats of oil bound distemper, all as specified.

M&L for preparation of old painted wall surface and applying two coats of weather proof acrylic emulsion paint in camouflaging pattern as approved, all as specified.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area n exc 1.50 Sqm each, complete all as specified.

Taking down chowkats or frames including shutter (without taking off shutters from the frame) area exc 1.50 Sqm but n.exc 4.00 sqm each, complete all as specified.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with size of frame 105x60mm incl filling PCC 1:3:6, type C0, complete all as specified.

S&F 30mm thick flush shutters, solid core construction, with block board core and with both faces are covered with decorative face veneer with lipping/frame to match, all as specified.

S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified.

S&F 300 mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified.

S&F 125 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor of ocerall length 140mm. all as specified.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain single side prelam PVC sheet used instead of plain colour PVC sheet with MS square tube S&F in opening as per specification and drgs and edges will be painted to match with prelam sheet complete all as specified.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (styles) with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet of 02mm on front face and 2mm plain colour PVC sheet on back face all as specified and directed with particle board core, all as specified.

S&F 100 mm long extruded aluminium handles, cast type, anodised, complete all as specified.

S&F 100 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, all as specified.

S&F 100 mm long butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified.

S&F in repairs drapory rod 25 mm dia, fancy type of mild steel powder coated inculding mild steel powder coated funnel and brackets, complete all as specified.

Demolition of floor, hearth or wall tiling including cement mortar bedding / backing coat, and rubbish off the premises, all as specified.

M&L for 100mm thick cement concrete type D-2, 1:4:8 (using 40mm graded aggregate) as in sub floors, sub bases, floors and pavings, all as specified.

M&L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in sub floors, sub bases, floors and pavings., all as specified

M&L 15mm thick screed or bedding layer in cement mortar (1:6) for laying floor finishes, complete all as specified.

M&L 10 mm thick backing coat or bedding layer in cement mortar (1:4) to receive wall tiles, complete all as specified.

M&L for vitrified ceramic tiles 10 mm thick light shade double charged (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for vitrified ceramic tiles 10 mm thick light shade double charges (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match, all as specified.

M&L for coloured glazed ceramic digital tiles in vertical surfaces 350X250X7mm/ 450X350X7mm thick (with multi colour combination in pattern as directed), set and jointed in neat cement slurry and pointed in white or colour cement to match, complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets & snap grid etc, complete all as specified.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, all as specified.

M&L for gypsum board 12mm thick in ceiling fixed with screw as per manufacturers instructions including two coats of oil bound distemper over a coat of 1mm thick wall care putty incl necessary taping of joints etc, complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (any tint), all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified.

S&F 3mm thick sheet glass, ordinary quality and glazing with glazing clips/oil putty, in squares not exceeding 0.5 Sqm in each pane, all as specified.

Taking up or down 15mm bore steel tubing and connections, all as specified and directed.

S&F 15 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, all as specified and directed.

S&F 20 mm bore galvanized steel tubes, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, all as specified and directed.

M&L for lagging to 20mm dia pipes, all arround with 25mm thick bonded mineral wool pre-formed `SNAP ON` pipe sections of density 144 Kg/cum conforming to IS 9842, all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks etc, all as specified.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floors, all as specified.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or floors, all as specified.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, all as specified.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, all as specified.

S&F 75mm dia PVC (SWR) bends any radius, all as specified.

S&F 75mm dia PVC (SWR) bends any radius with access door, all as specified.

S&F 110mm dia PVC (SWR) bends any radius, all as specified.

S&F 110mm dia PVC (SWR) bends any radius with access door, all as specified.

S&F 75mm dia PVC (SWR) vent cowl,complete all as specified.

M&L for PVC floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement, including embedding with PCC 1:2:4 type B-1, all as specified and directed

S&F in repairs vitreous china wash hand basin, under counter basin of white colour of size 560X450mmx185mm including cutting hole for WHB in granite top, brass chromium plated waste fitting and PVC waste pipe including finishing the joint with white or colour cemnt, complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass chromium plated basin mixture of 15 mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white,including fixing bolts complete all as specified.

S&F plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified.

S&F in repairs mild steel chromium plated jet spray with pipe, to be fitted with EWC, complete all as specified.

S&F in repairs for 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connection to pipes and incl 32 mm dia for low level cistern flush pipe, complete all as specified.

S&F in repairs vitreous china urinal half stall type white including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60 mm long brass screws, pointing around urinal back in cement including supply & fixing of brass chromium plated angle cock, flush pipe, complete all as specified.

S&F urinal spreader of PTMT of any colour including 15 mm dia pipe flexible pipe, complete all as specified.

S&F in repairs for 15 mm size bib taps fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified.

S&F in repairs for 15 mm size angle valves, cast copper alloy, screwed dowon, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, all as specified.

S&F in repairs chromium plated mild steel grating 100mm dia with waste hole, complete all as specified.

S&F in repais brass chromium plated, tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified.

S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm, complete all as specified.

S&F rotational moulded polyethylene water storage tanks of 500 litre capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including hoisting, connecting including dismantling existing tank, all as specified.

M&L for ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20 mm, all as specified.

Demolition of stone slabs and tiles of any description or thickness in floors etc laid, bedded and pointed in any mortar, all as specified.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in WHB counter, steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as in counter for under counter wash hand basin, complete all as specified.

Demolition of reinforced cement concrete of any description (reinforcement cut as required to facilitate demolition) and in any position, complete all as specified.

M&L for reinforced cement concrete type B1 1:2:4 (using 20mm grade aggregates), as in slabs supported on walls, beams and columns in floor etc., all as specified.

Use & waste form work to sofit of suspended slab such as roof slab, floor slab, landing and similar workn exc 200mm thick flat fair finished surfaces, all as specified.

Use & waste form work to edge of concrete flats exc 5cm but n exc 10cm wide, all as specified.

M&L for steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binging with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, and removal of debries from site.

S&F 0.63 mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screw and washers, in roofs, walls etc with grade of zinc coating 275, all as specified.

S&F 0.63 mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, all as specified.

All as per Item No 88 above but except sheet:- Note:- Old sheet retrived from Item No 87 above shall be reused.

M&L for cement concrete type B-2 1:4:8 (using 40 mm graded aggregate) as in foundation, filling and mass concrete, complete all as specified.

Dismantling timber scantlings in unframed work 40sqcm and over in section, in any position, all as specified

M&L for MS work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410- W (Gde- E-250) quality-B, all as specified.

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) over one coat of red oxide primer, complete all as specified.

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described including preparing new zinc (or galvanised) surface to receive painting, by coating with modrant solution including washing & cleaning etc and applying two coats of synthetic enamel paint (any tint) over one coat of red oxide primer in Camouflaging pattern as approved, complete all as specified.

M&L for preparation of old surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint (any tint) in Camouflaging pattern as approved, complete all as specified.

S&F in repairs aluminium composite panels, 5 mm thick as in wall/ ceiling, of any colour, shape, size and design, including necessary aluminium frame work required & including all necessary fittings and fixtures and necessary taping, complete all as per manufactures instructions and all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) of any description, in any position not otherwise specifically provided for, complete all as specified.

M&L for plain cement concrete 1:2:4, Type B1 (using 20mm graded aggregate), as in roof kerbs or mud stops, padding rounded or chamfered on edges, all as specified.

M&L for 75mm thick PCC 1:3:6, type C-2 (using 40mm graded aggregates), as in plinth protection, finished the surface even and smooth without using extra cement, all as specified.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as specifed.

M&L for 75mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base to interlocking blocks, complete all as specified.

M&L for sand cushioning for laying interlocking tiles, complete all as specified.

M&L for machine pressed precast concrete rubber moulded interlocking paver blocks any shape and size of any pattern conforming to IS 15658-2006, of 60mm thickness, M-35 grade with grey cement and pigments, complete all as specified.

M&L cement concrete type B1, 1:2:4 (using 20mm graded aggregate), in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, all as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar of 150mm bore, all as specified.

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified.

Supply only integral water proofing compoud, all as per manufacturer's instruction, complete all as specified.

M&L for cement concrete type B-0 1:2:4 (using 12.5mm graded aggregates), as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

S&F for 150mm internal dia reinforced concrete pipes, class NP 2 with one collar per length of pipes, laid in trenches and jointed including testing, complete all as specified.

M&L for cement concrete 1:4:8 type D-2, as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150mm bore of pipes, complete all as specified.

M&L extra for forming fair finished drain or channel 15cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., all as specified and directed.

Returning filling in soft/loose soil including spreading, leveling watering and well ramming in layers not exc 25 cm thick all as specified.

Removing surplus excavated spoil to a distance not exc. 50m and depositing where directed at a level not exc 1.5m above the starting point complete.

M&L for pre-cast reinforced cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregates), as in cover slab for man holes, set in CM (1:4) etc includimg necessary form work, complete all as specified.

M&L for steel TMT bars 10 mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binging with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.

M&L for LLDPE septic tanks designed to carry sewage and sludge water, of suitable diameter & height for 10 users, including excavation in any type of soil, PCC 1:4:8 in foundation including lowering, inlet & outlet connections, vent pipe, cover all as per manufacturer's specifications and instructions, complete all as specified and directed by Engr-in-Charge. (Make- Sintex, Code No. PWTS-AM-300-01 or equivalent of make: Comfert polymers/ polywell/ polycon).

Construction of soakage well including excavation in any type of soil, PCC in foundation, walls in honey combed masonry with top ring concrete including intercepting chamber & screen chamber made of brick masonry in cement mortar, RCC top cover and filled with brick bats of size 2.40m dia and 4.50m depth, complete all as specified and shown on drawing no CE/AF/STD-15/2000

S&F aluminium frame for doors, windows, ventilators with powder coating (minimum thickness of powder coating 50 micron) of any colour, with one or more rebates including joining cleat for fixing etc, complete all as specified.

S&F aluminium door shutters with powder coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc., all as specified

S&F aluminium window and ventilator shutters with powder coating (minimum thickness of powder coating 50 micron) of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21, 100mm long (2 no.), suitable handle (1 no.), complete all as specified

M&L for aluminium grill powder coated (minimum thickness of powder coating 50 micron) and fixing over U channel as per pattern, all as specified.

S&F aluminium composite panels, 3.5mm thick as in doors, of any colour, shape, size and design fixed on aluminium frame work including all necessary fittings and fixtures and necessary taping, complete all as per manufacturer's instructions, complete all as specified.

S&F 5.5 mm thick sheet glass, ordinary quality with and glazing with glazing clips/oil putty in squares not exceeding 0.5 Sqm in each pane, all as specified.

S&F 5.5 mm thick sheet glass, ordinary quality with and glazing with glazing clips/oil putty in squares exceeding 0.5 Sqm in each pane, all as specified.

S&F door closer hydraulicaly regulated, designation No. 2 universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kg, complete all as specified.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, all as specified.

S&F in repairs waste coupling of PTMT (half or full threaded), minimum weight 45gms, suitable for discharge pipe of 40mm bore dia complete all as specified.

S&F in repairs waste pipe 40mm dia fixed to sink, all as specified and as directed.

Excavation in trenches, n. exc 1.5 m wide and n. exc 1.5m depth and getting out in for foundation of pole,stay,laying of cable and pipe in any type of soil etc all as specified and directed

Returing, filling in incl spreading, levelling, watering and well ramming in layers n exc 25cm thick after laying of the cables,jointing & testing complete all as specified and directed.

Removing excavated material to a distance n.exc 50 m & depositing where directed at a level n. exc 1.50 m above the starting point complete as specified and directed.

M&L for sand cushioning in trenches spreading and consolidation 8 cm thick before laying the cable and 15 cm of the sand after laying the cable but will be measured 18 cm after punning etc complete as specified and directed.

M&L for laying of bricks well burnt sub class B (old pattern) laid flat for cable protection width equal to the length of bricks complete all as specified and directed

Supply and fixing galvanised iron tube ` light grade' for protection of copper strip at wall and duct/road/trench for 40 mm dia of pipe complete all as specified and directed by EIC

Taking down copper/aluminium point wiring (light,fan,socket & power) complet incl fixtures and fittings such as switches,ceiling rose,pendent holdes,regulators,sockets,light fitting etc and making good disturbed surface of wall,floor etc complete as specified and directed.

M&L Point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including concealed/surface , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets, fan regulator etc for the following :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

(a) One light/fan point controlled by one way switch 6 amps 240 volts

(b) one 3 pin 6 Amps switch socket out let point on independent board

(c) one 3 pin 6 Amps switch socket out let point on same board

M&L Point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable 1100 volt grade in and including , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings & other accessories and also including PVC insulated ISI marked unseathed FRLS cable 1100 volts grade of size 2.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling, modular MS box with modular cover plate with frame suitable for modular switches, sockets 16 Amps, 240 volts :- Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green)

S&F modular one way switch 6 Amp 240 volt marked light/fan suitable for one module etc complete as specified and directed Make- Legrand/ Anchor/ Havells

S&F Modular 6 Amp 5 pin universal socket suitable for two module , 250 volts complete all as specified and directed by Engr-in-charge. Make:- Legrand/ Anchor/ Havells

S&F modular switch one way 16 Amps 240 volts suitable for one module complete as specified and directed by Engr-in-charge. Make- Legrand/ Anchor/ Havells

S&F Modular 6/16 Amp socket suitable for two module , 250 volts complete all as specified and directed by Engr-in-charge. Make Legrand/ Anchor/ Havells or equivalent approved by GE

S&F modular step type two module fan regulator suitable for 120 watt 250 volts complete as specified and directed by Engr-in-charge Make- Legrand/ Anchor/ Havells or equivalent approved by GE

M&L for ceiling rose with three terminal as per relevant IS complete as specified and directed. Make SSK/ havells/ legrand / Anchor

S&F recess/ surface/ suspended mounted LED 36 watt slim ceiling light with extruded aluminium housing and milky diffuser complete as specified and directed. Make: Wipro Cat Part No CRCO10R038HP57GL1 or equivalent in Havells /Crompton

S&F Energy saving new generation 20 W LED IP 65 bulkhead luminair with opal diffuser etc complete as specified and directed by Engr-in-charge. Make -C&S module No LTB20WLED or equivalent in Havells /Crompton

S&F in repair LED flood light 50 watt IP66 high power flood light with pressure die cast aluminium housing complete with all accessories incl 3 core flexible cable from ceiling rose to connector of fitting etc complete as specified and directed Make: C&S module No LTEFI50WHPLED or equivalent in Havells /Crompton

S&F decorative post top lantern for 360 C indirect light resistant to impact and corrosion, Glare free and better uniformity IP-65 protection miliky version with all accessoreis incl 3 core flexible cable from ceiling rose to connector of fitting etc complete as specified and directed. Make CG cat part No LPTO-40-CDL or equivalent in Havells /Crompton

S&F recess mounting LED 18watt ultra slim ceiling light with extruded aluminium housing and milky diffuser incl suitable size driver and 3 core flexible cord from ceiling rose to connector of fitting etc complete as specified and directed. Make: C&S, Havells, Crompton, wipro

S&F LED 18 watt down lighter with aluminium die cast in white powder coating frosted PMMA diffuser gives free light incl 3 core flexible cable from ceiling rose to connector of fitting etc complete as specified and directed Make Crompton model No LCDN-18-CDL/TL/WW or equivalent in Havells / C&S / wipro

S&F decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 20 watt luminaire all as specified & approved by EIC.Make:- C&S ,Havells ,Crompton, wipro

S&F decorative Self ballasted LED Batten With Extruded Thermoplastic body with PC diffuser fitting with>120º wide Distribution 10 watt luminaire all as specified & approved by EIC.Make:- C&S, Havells, Crompton, wipro

S&F aerodynamically designed street light with excellent thermal management inbuilt tilt angle arrnangement with IP protection of capacity 90 watt with all accessories as per manufacturer norms incl 3 core copper cord from ceiling rose to connector of fitting etc complete as specified and directed by Engr-in-charge Make - Crompton cat part No LSTN-90-CDL-A or equivalent in Havells, wipro, C&S

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 4 way TPN (VTP) suitable for MCCB DB's 415 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed.

S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way SPN suitable for MCB DB's 240 Volts with 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed

S&F MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 63 Amps 10 KA breaking capacity etc all as specified and directed. Make Legrand cat part No 408618/20 or equivalent approved by GE

S&F MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 6-32 Amp breaking capacity 10 KA etc all as specified and directed. Make Legrand or equivalent in havells/ crompton

S&F MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incomming and out going controlling cercuit of capacity 63 Amp breaking capacity 10 KA etc all as specified and directed. Make Legrand or equivalent in havells/ crompton

S&F MCCB's with 125 Amp 4 Pole 16 KA 415 V 50 HZ all as specified and directed Make- Legrand or equivalent in havells/ crompton

M&L for Sub main wiring with FRLS PVC insulated unsheathed 2X6 sqmm multistranded copper conductor cable 1100 V with 1X6 sqmm FRLS PVC insulated green multistranded copper cable for continuous earth drawn through & including concealed PVC conduit of appropriate size not less than 20 mm dia & 1.8mm wall thickness with all accessories including cutting grooves and making good disturbed surface to match existing including taking down existing surface sub main wiring complete all as specified and directed. (Note: Two runs of FRLS PVC cable with one run of earth conductor and conduit shall be measured as one RM.)

Disconnecting, taking down ceiling fan from existing place and refxing the same after replacement of rubber bush, canopy,capacitor 2.5 ,mfd, clip incl greasing/oiling incl painting one coat of synthetic enamel paint after preperation of surface as per specified incl replacement of unserviceable suitable size 3 core copper cable from ceiling rose to connector of fan etc and writing the fan No complete as specified and directed by Eng-In-Charge.

Earthing complete with galvanised steel earth plate electrode of size 60 x 60 cm x 6 mm thick , buried directly into ground vertically to a depth not less than 2.25 m below normal ground level with top edge of the earth plate at a depth not less than 1.50 m below normal ground level, surrounded on all sides by 150 mm thick charcoal and common salt starting from ground below eath plate upto 150 mm above GI plate in alternate layers connected to galvanised earth lead wire of size 4 mm (8 SWG) by means of socket (lugs), bolts, nuts, check nuts and washers earth wire protected by 15 mm bore light grade GI pipe laid in floor and fixed to wall with proper size of FI clamps and watering pipe, light grade of size 20 mm bore including wire mesh funnel PCC 1:2:4 type B-1 using 20 mm grade stone aggregate including from work, cement mortar with height 300 mm above normal ground level including PCC 1:2:4 type B1 as in pit cover 40mm thick confined with XPM of weight 4 Kgs/Sqm and 6mm dia bar handle with frame made of angle iron 40x40x3mm, necessary excn in earth work in any soil including testing on completion for desired result all as shown and specified in Electrical late No 3 of SSR 2009 Part-I, complete all specified & directed.

Note : (i) Main earthing lead from earth plate electrode to test point upto length of 7.50 mtr shall deemed to be included in the unit rate quoted by the tenderer against this item. (ii) Earthing lead beyond 7.50 mtr long shall be mesured and paid separately under the relevant item of this schedule. (iii) On testing after completion, if satisfactory resistance value of the eath is not obtained, the contractor shall have to redo the earthing without any extra cost to the department.

S&F in repair heavy duty exhuast fan 300mm, 900 RPM turbo force model single phase with louvers and all accessories as per manufacturer norms including 3 core flexible cord from ceiling rose to connector of fan etc complete as specified and directed by Engr-in-charge. Make -Havells/sudhir/Anchor

S&F industrial single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole C series MCB of capcity 20 Amps 10 KA 230 V etc complete as specified and directed

Supply and fixing in repair ceiling fan 1200mm sweep with all accessories as per manufacturer norms and unserviceable fan deposited in MES store yard etc complete as specified and directed by EIC Make- Havells/Usha/Khetan

Supply and fix storage type water heater 5 star rated,25 ltrs capacity vertical wall mounting type made out of CRCA outer body, stainless steel storage tank, titanium enamelled heating element, thermostate, thermal cutout, glass wool incl 15mm, 450 mm long flexipipe (as per sample) etc. complete including making necessary electrical and water connections with 2.5 sqmm 3 core copper (multistranded) cable from geyser connnection to socket incl hold fast for fixing of new geyser and writing the MES No etc complete as specified and directed by EIC Make : Havells/ Racold/ Jaguar

Supply,installation,commissioning and testing inbuilt Heating and Cooling arrangement split type air conditioner (high wall with cordless remote with) of capacity 2 TR, 3 Star with inverter technology suitable for non CFC refrigirant gas including material and labour for the following works as involved for smooth functioning & installation of outdoor / indoor for split type AC all as directed by Engr-in-charge. Make- Hitachi/blue star / Voltas / Daikin (a) Fixing the heating & cooling unit with grounting nuts, cutting groove to wall for gas pipe and water drainage pipe complete all as specified & directed. (b) S&F cutting, bent to shape copper pipe of appropriate size from outdoor unit to indoor unit by cutting holes to wall incl brazing the copper pipe, fixing union all as required at site & directed. (c) S&F PVC pipe 20 mm dia transparent flexible heavy duty for drainage pipe (approx-3.0 M).

(d) Insulation of both the copper pipe with insulating material and covering the complete pipes with pvc casing & caping of size 75x75mm for mechanical protection of copper pipe complete all as specified & directed (e) Charging of correct quantity non CFC refrigerant gas after necessary brazing/fixing of both the outdoor/indoor unit and testing complete on load up to saitisfaction of EIC. (f) S&F MS bracket factory made, fixed on wall through fastener of appropriate size and guage for installation of out door unit (condensing unit) complete all as specified & directed. Note - (i) All other connected civil works and other miscellaneous works required for installation of split AC & copper functioning as directed by Engr-in-charge.

Supply , laying, testing and commissioning for 1100 volt grade XLPE insulated heavy duty cable, 25 sqmm 4 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches, fixed along the poles or through GI Pipe laid under floors road etc fixed concealed in walls encased in GI pipe etc , complete all as specified and directed. Note : Excavation & Earthwork shall be measured and paid separately.

M/S TARIQ AHMAD SHEIKH

G N Constructions

M/S BASHIR AND SONS

M/S Abdul Ahad Rather

M/S Haji Zahoor Hussain Ganai

M/S WANI AND SONS

M/S Thakur & Sons