Provn of Basketball Court, covering of shed interlocking tiles and other misc repairs in Kendriya Vidyalaya at New Mil Stn Kapurthala under GE Kapurthala

Amount

Excavation in trenches n.exc 1.5m deep & n.exc1.5m wide on plan in soft/loose soil and getting out.

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in loose / soft soil all as specified and directed by Engineer - in – Charge.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil.

Removing excavated material n exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point.

Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) built in cement mortar.

Demolition of cement concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed by the Engineer in Charge.

M & L 75 mm thick Cement concrete type C1, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring.

M&L 40 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in flooring surface finished even and smooth complete all as specified and directed.

M & L Plain cement concrete (1:5:10) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M & L Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete all as specified.

M&L Brick work with sub class'B' bricks, straight or curved on plan in CM 1:6 complete all as specified and directed.

M&L 50mm thick cement concrete type B1, 1:2:4 using 20mm graded aggregate as in flooring incl fair finished even and smooth without using extra cement complete all as spd and directed.

M&L 25mm thick cement concrete type B0, 1:2:4(12.5mm graded crushed aggregate) as in floor incl fair finished even and smooth without using extra cement complete all as spd and directed.

M & L Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. s neat cement slurry andet and jointed in pointed in white or coloured cement to match in light shade floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces incl 15mm thick screed bed/bedding layers in cm 1:4 complete all as spd & directed.

M&L Machine cut kota stone slab flooring 18-20mm thick over or including 20mm thick cement screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and mirror polishing complete.

All as per item above but on vertical surface over and including 15mm thick rendering in CM 1:4 all as specified.

Taking down cement plaster on brick or stone wall etc incl raking out joints, hacking for key scrubbing down with water etc.

Rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 compound finished even and smooth without using extra cement complete all as specified and as directed.

M & L Rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: water proofing compound shall be measured seprately.

Supply only liquid water proofing compound complete all as specified and directed.(Make:Dr. Fixit,Pidilite)

M & L Rendering 10mm thick cement plaster in cement mortar (1:3) on brick or concrete surfaces of soffits of chajjas, roof projections or ceiling and finished even and smooth without using extra cement complete all as specified and directed .

M&L Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over one coat of birla putty 3mm thick preparatory to distempering complete all as specified and directed.

M & L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and as directed.

M&L Three coat of white wash on plastered/unplasterd surface on ceiling including preparation of new plastered surface complete all as spd and directed.

M & L machine pressed precast conc. interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and pigment complete all as specified and directed by Engineer - in - Charge.

M & L for Sand filing under interlocking paver blocks by 25mm thick sand cushion including watering & consolidation.

M & L for Providing,cement concrete type C1 1:3:6 (20mm graded aggregate) as in kerb stone edging set in CM(1:4) exposed surface even and smooth complete all as specified

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground, posts embedded in concrete etc incl excavating in post holes ( or similar holes) each in soft/loose soil, nexc 0.5cu.m getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering with PCC (1:2:4) type B1 as in coping/bedplate complete all as specified)

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, returning, filling in and ramming earth, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance not exceeding 50m and making good surface all as specified and directed by Engineer-in- Charge.

M & L for Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified (Make - Bhushan/Tata/Everest)

S & F steel work in tubular trusses, rafters and posts etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 (grade st-240)all as specified and directed by Engineer - in - Charge.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality B complete all as specififed

S & F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and directed by Engineer - in - Charge.

S & F Synthetic Cushion Coating Surface Preparation: The surface shall be cleaned thoroughly with water to remove all dust & dirt, filling up the depressions with chemically based sealer etc. Eight Layer System by Carbolink India Pvt. Ltd. First layer of primer will be applied directly at base surface. It is make the bonding between ground and subsequent layers. After that two coats of resurfacer will be applied. After the resurfacer two layers of cushion coat will be applied. Finally 3 Layers of colour top coat will be applied. Finally the line marking will be done with white Color Make :- (i) Care Build 10, Bank Enclave Jalandhar, (ii) Home & Land Shapra, Karnail Singh Nagar, Ph-I, Phokowal Road, Ludhiana, (iii) DH Construction and Chemical 1437, Sec 32A, Chandigarh

M&L applying two coats of synthetic enamel paint over a coat of red oxide or zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

S & F rolled sections Fe-410-W (Gde-E-250) Quality A as in framing for cladding, glazing and the likes fixed with angles cleats and connecting plates, etc all as specififed and directed.

Motorway Constructions