8941 SPECIAL REPAIR REPLACEMENT TO 09 NOS COOLING APPLIANCES AGAINST BER AT WRSTG MBI BLDG No P49 AT FMU BUILDING 2nd FLOOR SPECIAL REPAIRS OF LEAKAGE SEEPAGE AT LIGHT FOUNDARY SHOP C NO 40 41 BEF DEPT AND PROVISION OF FIRE MAIN AND FIRE ALARM SYSTE

Amount

Supply, install, Test and commissioning INVERTER TYPE Split type AC 1.5 TR capacity units complete with cordless remote control unit, 220-240 volt, 50Hz, single phase fitted with high quality rotary compressor and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating complete including taking down existing AC as directed. Note : Rate of supporting brackets for outdoor unit is deemed to be included in unit rate quoted.Make : Daikin/Hitachi/LG/Blue star

Supply and fix Single pole and neutral enclousure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps 240V all as directed incl taking down old existing unserviceable enclosure.

M&L for submain wiring with 2 runs of 4 sqmm and one run of 4 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable with proper colour coding drawn through and including non mettalic PVC casing & capping not less than 25mm width ISI marked with all accessories like PVC elbow, PVC Tee etc fixed on wall complete including connecting up all as specified and directed.

Supply, fixing and clamping , jointing copper tubing for suction line and for liquid discharge line insulated with suitable insulation material including making hole in wall for passing through and making good disturbed surface complete.

S&F for Rigid non-metallic PVC conduit 20mm dia incl connecting to water cooler drain pipe complete fixing accessories such as complete of all tees, bends,elbows, reducers, mouth tube ends fixing accessories such as GI saddles, full threded screws and (Narayan) nylon rawl plugs etc surfaced on walls/roofs all as specified and as directed

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including all necessary scaffolding as required and rubbishing off the premises etc complete all as specified and as directed..

M&L for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a matalic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary incl making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required incl curing required complete all as specified and directed.

M&L for rendering 15mm thick on brick work or concrete surfaces or other than fair faces of brick work or on one side of lathing in cement mortor 1:6, finished even and smooth without using extra cement complete all as specified.

M&L for rendering 5mm thick in CM (1:3) on fair faces of concrete surfaces as in ceiling finished even and smooth without using extra cement all as specified.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of of primer all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling surfaces and applying three coats of white wash.

M&L for preparation of plastered /unplastered surfaces of ceiling surfaces and applying one coat of white wash.

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper all as specified and directed

M&L for applying 3mm thick wall care putty (JK/Birla) for making the surface even & smooth all as specified and directed by the Engineer-in-Charge.

Preparation of new plastered surfaces of walls soffits, facia roof and applying 2 coats of weather proof acrylic based paint 100% arylic over a coat of white cement base primer (Make : Birla) all as specified.

Preparing old decorated surfaces of walls soffits & facias of beams, chajjas etc complete by washing, rubbing down & stopping making good the surface & applying 2 coats of weather proof Acrylic based paint (100% Acrylic) exterior Gde .

M & L for preparation of walls & applying two coats of chemical waterproofing treatment on wall & Chajja, terrace & Parapet wall; such as Flexcoat, Beckcoat, Exshield etc or equivalent complete as per manufactures Instructions, all as directed.

Providing and applying double layer with Chowgule Koster dachflex super crack sealer for repairing the cracks of the external wall areas. MAKE: Chowgule Koster (I) Construction Chemicals Pvt. Ltd

M&L for preparation of old plastered and cracked surfaces of walls external , applying two coats of non dilutable Dr.Fixit Raincoat over a coat of Dr.Fixit primeseal primer having dft of 110 micron and elongation of >200% on external surface as per manufaturers instruction complete as specified and directed by Engineer-in- charge.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section.

S&F 150 mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified.

S&F butt hinges 100 mm mild steel hinges medium weight.

Providing plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone agg) as in lintels upto 1.5 M clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, roof kerbs, water troughs and the like including weathering slightly rounded or chamfered angles and throating all as directed.

M&L for 50 mm thick PCC 1:3:6, type C2 (using 20mm graded stone aggregate) in plinth protection and path laid in alternative bays finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying one coat of synthetic enamel paint with necessary scaffolding for high rise bldgs etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land

M&L for coloured glazed ceramic tiles 450x300x7 mm thick but as on vertical surfaces such as skirting/dado including 10mm thick rendering in CM 1:3.

M&L for Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) (Using 20mm graded stone aggregates) dia 50mm

Taking down PVC wastage and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and directed by EIC

S&F 160mm dia bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls with MS clamps all as specified and directed.

S&F 160mm dia bore PVC (SWR) bends any radius

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls

S&F 110 mm bore PVC (SWR) bends any radius all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius all as specified and directed.

Dismantling 75/100/110mm dia CI pipe jointed in cement mortar and taking out of trenches as required.

S&F 100 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls

S&F 75 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears, with cement joints, fixed to walls

S&F CI Bends100 mm bore (any radius), diminishing pieces or tapers ( larger bore measured)

S&F CI Bends 75 mm bore ( any radius), diminishing pieces or tapers ( larger bore measured)

M&L Cast iron nahani trap with grating including jointing to waste pipe with run lead, 100 mm.

M&L Cast iron nahani trap with grating including jointing to waste pipe with run lead, 75 mm.

M&L for Branch pieces, 100 mm bore single ( equal or unequal), ordinary or inverted ( spigot or socket type) or with parallel branches

M&L for Branch pieces, 75 mm bore single ( equal or unequal), ordinary or inverted ( spigot or socket type) or with parallel branches

S&F stack clamps out of 50x5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75mm/100mm dia bore of pipe.

Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes gate stops, parts of ranges, balusters and similar articles exc 5 Kg Each all as specified.

Taking up or down existing GI water tubing complete with all fittings of 15 mm bore

Taking up or down existing GI water tubing complete with all fittings of 20 mm bore

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls or ceilings with saddles/spacers complete all as specified and directed by Engineer-in-Charge.

Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for style and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement in the frame at site. complete all as specified

S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partition/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant etc all as specified and as directed by Engr- in- charge.

S&F in repairs vitreous china wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) but with & including plastic seat cover of approved colour with flat bottom , and cover and mild steel chromium plated or aluminised hinging device etc complete

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding all as specified and directed.

Supply only cast iron 'P' trap 100mm dia

S&F in repairs fancy type CP Pillar taps 15 mm dia, cast copper alloy , with capstan heads, screwed down high pressure ,with long screwed shanks and fly-nuts , screwed for iron pipe and fixed.

S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down.

S&F in repairs fancy type angle valve chromium plated cast copper alloy 15mm bore with crutch or butter fly handle.

S&F in repair wash hand basin vitreous china white (flat back) of size 550x400mm including bracket 15mm dia 32mm dia waste coupling and 32mm dia PVC waste pipe 90cm long etc. complete all as specified.

S &F vitreous china bowl urinal flat back,size 465x355x265mm, white with grating and union for discharge pipe fixed complete to walls all as specified and directed.

S&F in repairs 15mm dia bore toilet hand pressed nozzle (Health Faucet) with 1 mtr long tube with CP wall bracket complete all as specified & directed by Engineer-in-Charge.

S&F in repairs Toilet paper holder of vitreous china (White) fixed to walls with chromium plated (CP) brass screws

S&F PVC connections 15 mm size with PTMT nuts of length 450mm

S&F in repairs PVC valveless syphonic action type ,flushing cistern Low level white, with inlet ball valve ,float and handle 10 Ltr capacity including brackets.

S&F in repairs Flush pipe of Polyethylene of low or high density or PVC 32 mm dia. for low level cistern

S&F in repairs Soap dish any type fixed to plugs with chromium plated brass screws.

S&F in repairs aluminium anodised tubular towel rail 20mm dia D type 60 cm long between flanges incl necessary aluminium brackets complete all as specified and directed.

Cleaning & drying surface of floor /dado of bathroom, WC & kitchen etc by mechanical means i.e. blower etc as directed.

Providing & Opening joints of floor tiles, junction of floor & dado tiles, 300mm height from bottom layer of dado tiles with electrical grinder, electrical blower etc complete in WC, bathroom & kitchen all as directed.

M & L for inserting chemical mixture of polymer 960 & OPC through these opened joints manually by trowel to seal all cracks honey combing of slab/beams and walls etc complete upto 300mm height from bottom layer of dado in bathroom & kitchen.

All as per item No 76 above but in WC.

M & L for inserting chemical mixture of Polymer 960: GP Resin: Super seal M-104, Aquapox in appropriate ratio of 1:1:1:1 by weight in paste form through these opened joints of floor tiles and dado upto 300mm high from floor in bathroom and kitchen including NT etc complete.

All as per item No 78 above but in WC.

Removal of debris old concrete spoils etc excd 5 KM but not excd 15 KM complete all as specified and as directed outside MD Land.

Supplying installing, Testing & Commissioning of Microprocessor based 4 loop capacity , Networkable analogue addressable type fire alarm control panel with capacity of minimum 99 detectors and 99 analog addressable devices in one loop. Four access levels, capable of taking Flash Scan devices, flash EPROM sufficient numbers of programmable relay controls for controlling AHUs, pressurization fans, ventilation fans at fire pump room, monitoring of fire sprinkler and fire hydrant pump, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and then be capable of operating the system for 2 hours during an emergency conditions as required. and panels shall have provision of intigraton with BMS System.(UL/EN Approved) as per tender specificaiton. Make : Honeywell/Siemens/Bosch/Morley

LANDLINE/GSM FIRE ALARM AUTO DIALER WITH sms and Memory Available To Store 10 Phone Numbers dialling facility to reach the fire brigade to get the intimation about the location of the area Builtin Emergency Speech Dialer with 8 Numbers & 1/ 2 Messages,NO/NC contacts for both fire and fault, Automatic changeover arrangement to standby supply with battery charger with low battery indication,Fault/ failure indication such as MAINS FAIL, short, open, Battery FAIL etc,Micro-Controller Based System,Both Dialling Modes Can Be Used (Pulse/Tone),Recorded Message Playback Speaker Provision Available complete all as specified and as directed. Make : Agni/vighnaharta

Supply, Installing, testing and commissioning addressable Manual call point(Pull down/Break Glass Type). The device shall have an LED which shall blink in normal state and get steady on activation to monitor the health status of the device and shall be underwritters laboratories listed, semi flush type complete all as specified and directed. Make : Honeywell/Siemens/Bosch/Morley

Supplying Installing, Testing & Commissioning of Addressable monitor modules for Sprinkler Flow Switch and Door Holders complete all as specified and as directed. Make : Honeywell/Bosch/Morley/Siemens

Supply fix and commissioning and testing of addressable electronic hooter with built in amplifier unit with two tone generator of 100 meter range complete all as specified and directed. Make : Honeywell/Siemens/Bosch/Morley

Supplying Installing, Testing & Commissioning of Analog addressable Multi Criteria (Optical +thermal) detector with mounting based LED for AFC(Above Ceiling & below ceiling.) as complete all as specified and as directed. Make : Honeywell/Bosch/Morley/Siemens

Supplying Installing, Testing & Commissioning of Addressable control modules for AHU, Access control Integration & stairs Pressurization Fan Hooters / Sounders / Strobes etc complete all as specified and as directed. Make : Honeywell/Siemens/Morley/Siemens/Eqvlt

Supply and fix fault isolator module with automatic resetting arrangement complete all as specified and directed. Make : Honeywell/Edward/Bosch/Morley/Siemens or equivalent

Supply & laying PVC FRLS armoured cable 1.5sq mm solid copper conductor 2 core, XLPE Insulated, Extruded PVC sheathed, galvanized steel strip, electric power cables (heavy duty) 1100 Volts grade, laid in duct / along pole/wall etc including making connection complete and making good the distrubed surface matching with existing surface complete all as specified and as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is incl in quoted rate and no extra payment will be made for it. Make : Polycab/RR cable/ Finolex

Supplying Installing, Testing & Commissioning of Response indicator for Above ceiling detectors & Cabin Detectors complete all as specified and as directed. Make : Honeywell/Bosch/Morley/Siemens or equivalent.

Supplying Installing, Testing & Commissioning of The GUI based main network software must be capable of graphically representing each facility being monitored with floor plans and icons depicting the actual locations of the various systems; and / or sensors’locations. The GUI software shall be located in control room in one of the blocks and shall monitor all the blocks panel connected with each other. Along with work station complete all as specified and as directed. Make : Honeywell/Edward/Bosch/Morley/Siemens or equivalent.

Supply, erection, testing & commsioning of A.G. pipe line for court yard ,G.I. Pipe 'C' class as per IS : 1239 specification with ISI mark including necessary fittings like bends/flanges/ Nut bolts/ packing sheets etc. with 1 coat of red oxide primer and 2 coats of Apcolite paint. ( Above Ground ) and upto 15 meter HUME PIPE with Antocorrosive pypkote 4mm Thickness wrapping Coating with up to 1 ft digging work (Below Ground) Make : Jindal/TATA/Maharashra pipe of following dia :-

150 mm dia

100 mm dia

80 mm dia

25 mm dia

Supply , Erection Testing & Commissioning of C.I. Butterfly valve - PN 16 with necessary flanges / nut bolts etc. Make : DRP/nanak /Donfess/intervalve/normex/lehry/ISI Standard or equivalent of following dia :-

150 mm dia

100 mm dia

80 mm dia

25 mm dia

Supply , Erection Testing & Commissioning of C.I.Non Return valve with necessary flanges / nut bolts etc. Make : DRP/nanak /Donfess/intervalve/normex/lehry/ISI Standard/Equ

80 mm dia

Supply , Erection Testing & Commissioning of(sluice Valve) Gate valve with necessary flanges / nut bolts etc. Make : DRP/nanak /Donfess/intervalve/normex/lehry/ISI Standard/Equ

80mm dia

Supply , Erection Testing & Commissioning of "Y" Strainer with necessary flanges / nut bolts etc. Make : DRP/nanak /Donfess/intervalve/normex/lehry/ISI Standard/Equ

80 mm dia

Supply , Erection Testing & Commissioning fire fighting Pressure Gauge upte 0 to 21 Bar with necessary mounting arrangements and accessories. Make : DRP/nanak/indfos /Donfess/intervalve/normex/lehry/ISI Standard/Equ

Supply , Erection Testing & Commissioning of Booster pumps for 440 V, 3 Phase, 50 Hz Confirming to IS- 12469 :1988 With CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearingssuitable for 440 volts, 3 phase, 50 Hz Suitable cement concrete foundation with plaster, (design and drawing to be provided by the Contractor while the foundation will be done. complete with Antivibration arrangement of cushy foot mounting. (At Terrace level)) including cover shed all as per site requirement. Make :Kirlosker/Crompton/PEW

Supply, installation, testing & commissioning of diaphragm type adjustable pressure switch for starting and shutting down the Hydrant, Sprinkler,water curtain and Booster pumps automatically. The pressure switch is dictated by line pressure with stainless steel (316) movement, pressure element and sockets etc. Make : Donfess/Indfos/ISI standard

Supply, installation, testing & commissioning ofFire Fighting Electrical Panel Suitable for Booster Pump 4 core wire supply with 3 phase outgoing The compartmentshall containCT operated digital or analog electronic ammeter of suitable and indicating lamps with Automatic pressure maintan option on MCBs for`ON'/OFF`TRIP' status of pump motors. Make: ASES/AGNI/NEEL/ISI STD

S &F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 sqmm 3.5 core Make: polycab/finolex/RR Cable/kei cable/havells

Supply , Erection Testing & Commissioning Air realese valve Make : DRP/nanak /Donfess/intervalve/normex/lehry/ISI Standard or equivalent

Supply , Erection Testing & Commissioning fire fighting swivelling type Hose Reel Drum complete with 3/4" dia x 30 mtrs length thermoplastic ISI mark hose & metal nozzle with necessary mounting arrangements and accessories. Make : Vintex fire/safety plus/newage/ isi std

Supply , Erection Testing & Commissioning of SS branch pipe nozzle as per IS 903 with ISI mark.Make : Vintex fire/safety plus/newage/ isi std

Supply , Erection Testing & Commissioning of hose pipe 15 meter as per IS:636 type I with ISI mark duly SS wire binded with SS male & female coupling as per IS 903 with ISI mark. Make : Vintex fire/safety plus/newage/ isi std

Supply , Erection Testing & Commissioning MS Hose Box duly painted red from outside & white paint inside to accommodate 2 length of hose & 1 nozzle complete with glass , allen key lock etc.,size 800 x 600 x 250 mm including fitting on the ground with metal sheet and standard arrangement. Make : Vintex fire/safety plus/newage/ isi std

Supply , Erection Testing & Commissioning of SS fire hydrant valve oblique type 63 mm dia single outlet for court yard & wet riser as per IS : 5290 with ISI mark with required accessories like GI nut bolts / Flanges etc. Make : Vintex fire/safety plus/newage/ isi std

ASHOK ENTERPRISES