Repair of Indoor CHC Building at Chirgaon at Sansashu SH Dismantling and Demolishing of old roof and rotted trusses and P F of steel truss i c prepainted steel roofing gutter etc Deposit Work

Dismantling of roofing including ridges ,hips ,valleys and gutter etc. and stacking the serviceable materials and disposal of U/S materials with in 50 mtr. Lead

Dismantling of wood works in frames purlins rafters andwall plates |up to 10 meters span and 5 metres height i/c stacking the S/S materials and disposal of U/S materials up to 50 mtr. Lead.

Structural steel work in single section, fixed with or without plate i/c cutting ,hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

|P/F prepainted sheet roofing i/c vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia with bitumen limpet washer filled with white lead complete. 0.60 mm thick.

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts, and nuts 8 mm dia. Limpet and bitumen washer. Complete. 0.63 mm thick.

P/F on wall face unplasticised rigid PVC rain water pipes conforming to IS: 13592 Type A i/c Jointing with seal ring leaving 10 mm gap for |thermal expansion single socketed pipe.110 mm dia.

P/F on wall face unplasticised PVC moulding /accessaries conforming to IS: 13592 Type A i/c Jointing with seal ring leaving 10 mm gap for thermal expansion single socketed pipe.110 mm dia.

P/F precoated galvanised steel sheet roofing accessaries 0.50 mm(+0.0 |5%) total coated thickness, zinc coating 120 gram per sqm as per IS:277 L,in 240 mpa steel grade 5-7 micron epoxy primer on both side of the 8|sheet and polyster top coat 1518 micron etc. complete. Gutter.

P/F high pressure PVC Spigot and socket waste and ventilating pipes |ISI marked i/c fixing with approved adhessive etc. complete. 110 mm dia. Pipes.

P/F PVC door bend ISl marked i/c fixing with approved adhessive etc. complete. 110 mm. ia.

P/F PVC plain bend ISI marked i/c fixing with approved adhessive |etc. complete. 110 mm. dia.

P/F high pressure PVC Spigot and socket waste and ventilating pipes ISI marked i/c fixing with approved adhessive etc. complete. 75 mm dia. Pipes.

P/F PVC door bend ISl marked i/c fixing with approved adhessive etc. complete. 75 mm. dia.

P/F PVC plain bend ISI marked i/c fixing with approved adhessiveetc. complete.75 mm. dia.

P/F PVC plain collar ISI marked i/c fixing with approved adhessive etc. complete.75 mm. dia

P/F M.S clamp jointing with wooden/steel screws complete. 110 mm.

P/F M.S. clamp jointing with wooden/steel screws complete. 75 mm.

P/F Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold watersupply i/c. all cpvc plain and brass threaded fittings, i/c. fixing the pipewith clamps at 1.00 m spacing.This includes jointing of pipes and fittings with one step cpvc solvent cement and testing of joints complete. I) 20 mm dia. (internal and External)

25mm dia

Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps i/c making good the |wall, ceiling and floor. i) 15 mm dia.

20 mm dia

P/F C.P.Brass stop cocks .15 mm dia.

P/F C.P. Brass bib tap with capstan head. 15 mm dia.(Long nose.)

P/F C.P. Brass bib tap with capstan head. 15 mm dia.(Short nose.)

P/F C.P.Brass Pillar tap.15 mm dia.

Providing and fixing C.P. brass waste for wash basin or sink.32 mm.dia

Providing and fixing P.V.C. connection pipe with brass unions. 15 mm dia. 450/300 mm length.

P/F PVC waste coupling union complete in all lead and lifts'

P/F White vitreous china padestal type water closet (European type) with seat and lid ,10 litre low level white viterous china flushing cistern and C.P.flush bend with fittings and C.I. bracket, 40 mm flush bend, over flow arrangement with special of standard complete.

Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fitting and fixtures complete. 10 litre capacity- white.

P/F Plastic seat cover i/c all accessaries complete.

P/F C.P. Brass soap dish with c.p. brass brackets fixed to wooden plugs with c.p. brass screws.110 mm diameter

Providing and fixing 100 mm dia sand cast iron grating for gully, floor or nahni trap

P/F Mixer for wash basin center hole based 15 mm dia.

P/F PVC floor trap ISI marked of self cleaning design including fixing with approved adhessive ,cost of cutting and making good the wall and floor etc. complete. 110x75 mm

P/F Brassfull way valve with wheel i/c fixing with aa accessaries complete. 20 mm diameter.

Providing and fixing angle valve bal with brass arms and fixing in water tanks to contrl the flow of water in all leads and lifts.20 mm dia.

Providing and fixinf Instant Water storage Geyssor of 3 litres capacity in all sccessaries complete.

P/F 8 mm dia.C.P./S.S. Jet with flexible tube upto 1.00 mtr long with S.S. triangular plate to eureopean type w.C. of quality and make as app roved by the Engineer -in -charge.

P/F viterous china wash basin with single hole for pillar tap with C.l.or MS. brackets painted white i/c. cutting holes and making good the same but excluding fittings etc. 630x450 mm

P/L centering shuttering and propping etc. in side and soffits of beams under 200 cm wide

P/L R.C.C cement concrete of spicified grade of 1:2:4 (1 Cement 2 sand 4 grade stone aggregate 20mm nominal size) and curing complete in platefrome and court yart/ground

P/L mild steel/tor steel reinforcement for RCC work i/c bending,binding and placing in placing in position complete.

Painting with synthetic enamel paint of approved brand and manufacture of required shade and colour to give an even shade two or more coats on wood and based surface complete.

Painting one coat (excluding primer coat) on previously painted wood and wood based surface with readymixed paint brushing to give an even shade including cleaning of all dirt dust and other foreging matter sand papreing and stopping etc.

Providing and applying white cement based putty of averege thickness 1.00mm of approved brand and manufacture over the plastered surface to prepare the surface even and smooth.