CIVIL WORK

Civil works Items :

Demolishing cement concrete manually /by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in-charge. nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead

Disposal of building rubbish/malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading ,transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50m initial lead, for all leads including all lifts involved.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilsters, columns, piers, abutments, pillars posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor block, plain window sills, fillets, sunken floor, etc. upto floor five level ,excluding the cost of centering, shuttering and finishing 1:2:4 (1 Cement : 2 coarse sand (Zone III) :4 graded stone aggregate 20 mm nominal size)

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification.

12 mm cement plaster in fine sand. 1:4 (1 cement:4 fine sand)

20 mm cement plaster in fine sand. 1:4 (1 cement:4 fine sand)

20 mm cement plaster in coarse sand. 1:4 (1 cement:4 Coarse sand)

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Removing dry and oil bound distemper by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches all complete .

Labour work: Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer having VOC content less than 50 grams/litre. ( Note: Primer will be supplied by the Institute)

Labour work: Wall painting with premium acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats (Make-Asian Apcolite or equivalent grade ) ( Note: Paint will be supplied by the Institute)

White washing with lime to give an even shade Old work: Two or more coats

Labour work: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer @ 2.20 kg/10 sqm. (Make-Asian paint Apex Ultima or equivalent) ( Note: Primer & Paint will be supplied by the Institute)

Applying priming coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats. 13.62.1 Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (Make-Asian Apcolite or equivalent grade )

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work 100mm dia pipe

75mm dia pipe

Painting G.I Pipes and fittings with synthetic enamel paint with two coats over a ready mixed priming coat of approved quality. 18.38.2 20 mm diameter pipe

18.38.3 25 mm diameter pipe

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty : Float glass panes of thickness 4 mm

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5 sqm and under, including cutting the patches in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal orf rubbish, all complete as par the direction of Engineer-In- Charge.

Errection of single bamboo scaffolding Work upto three floor level all complete as per the direction for ,roofing, repair,painting works.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws,hold fastners etc.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover

Meer Construction (BID ID -3237584)