SPECIAL REPAIR TO TOILET AND SHAFT PROTION IN MAP BUILDINGS NO P149 32 QTRS P150 32 QTRS P151 32 QTRS P 152 36 QTRS P154 32 QTRS AT KABUL LINE IN THE AREA OF GE EAST DELHI CANTT

S&F in 100mm bore Hubless Cast iron spun pipes, soil waste and vent pipe in any length with or without ears with cement joints fixed to walls/ceilings or laid in floor incl hubless stainless steel coupling 50mm wide, MS clamp 40x6 mm flat iron and 12mm dia round iron stays incl bolts and nuts incl securing to wall in PCC (1:2:4) and making good in cement mortar (1:3) complete all as specified and directed.

S&FHubless CI Bends of 100 mm bore complete all as specified.

S&F 100mm Hubless cast iron sanitary connection `P' branch, with branch 370 to 450mm long including joints etc complete all as specified.

S&F 100mm Hubless cast iron bossed pipe basin and bath connector, single (for one pipe system)

S&F 100mm Hubless Cast iron (single T) equal or un equal complete all specified.

S&F in repairs 100mm bore hubless cast iron floor trap, nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

Taking up or down 15mm bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor and making good in CM 1:3, to match existing complete in all respect as specified. (Note :- Work to be carried out upto G+8 stories and rates are including for the same complete all as specified.)

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 15mm bore any grade to walls and ceiling or laying in floors

Taking up or down 20mm bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor and making good in CM 1:3, to match existing complete in all respect as specified. (Note :- Work to be carried out upto G+8 stories and rates are including for the same complete all as specified.)

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 20mm any grade to walls and ceiling or laying in floors

Taking up or down 25mm bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting/chasing in wall/floor and making good in CM 1:3, to match existing complete in all respect as specified. (Note :- Work to be carried out upto G+8 stories and rates are including for the same complete all as specified.)

S&F 25mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 25mm bore any grade to walls and ceiling or laying in floors

S&F in repair Vitreous china wash down water closet pan (pedestal pattern) excluding flushing cistern and flush pipe, including fixing of water closet complete with plastic water closet seat black/white closed pattern witrh flat bottom and cover and mild steel chromium plated or aluminised hinging device. (Note :- Work to be carried out upto G+8 stories and rates are including for the same complete all as specified.)

S&F in repair 15mm bore 2 way bib tap chromium plated brass with flange complete all as specified and as directed by Engr-in-Charge.

S&F in repairs health faucet chromium plated brass completed all as spd.

S&F in repairTowel Rail 600mm long of CP fixed with and including Chromimum plated brass screws and wooden/plastic cleats.

S&F in repair looking mirror size 600x450mm mounted on 6mm thick PVC sheet and aluminium frame all around incl fix with necessary fixing arrangement complete.

S&F in repair sheet glass shelf assembly consisting of 5.50mm thick sheet glass self 12cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and as directed.

S&F in repair corner glass self with CP bracket.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified.

S&F in repairs PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed including taking down of existing stop/angle vale complete all as specified and directed.

S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union fixed in repairs complete all as specified and directed.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Concealed type) with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S&F in repairs wash basin, Vitreous China white flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand but excluding taps, waste, chain and plugs and proclain stopper but including brackets fixed complete all as specified.

S&F in repairs 15mm dia Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified.

S&F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified and directed.

S&F in repairs 15mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L Glazed coloured ceramic tiles 350 x 450 x 7mm vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including rendering 10mm thick backing coat in CM 1:4 including dismantling of existing tiles or terrazo finish including cement mortar bedding of any thickness complete all as specified and directed.

M&L Non skid ceramic coloured joint free tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles,laid over and including cement screed bed 15mm thick in cement mortar (1:4) laying floor finish including dismantling of existing tiles or terrazo finish /roughening surface of old concrete floor including cement mortar bedding of any thickness complete all as specified and directed.

M&L for powder coated aluminium ventilator, openable, (top hung and bottom portion fixed type) without sash bars with aluminium section of weight 0.55 kg/RM including glazing, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, hook & eye minimum one no on each shutter( for top hung shutter), one no aluminium tower bolt 100mm long and 75mm long aluminium handle in each shutter etc. complete all as specified and directed. Note : glazing, wire mesh shall be measured and paid separately under respective items of BOQ.

M&L for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed. (Note :- Work to be carried out upto G+8 stories and rates are including for the same complete all as specified.)

S&F fibre glass reinforced plastic (FRP) door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate door frame moulde with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame as per specification & drawing complete all as specified and directed.

S&F FRP door shutter 30mm thick glass fibre reinforced plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer made with retardant grade unsaturated poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000 supply and fixing in the frame at site complete all as per specification & drawing complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty in sqr n exc 0.5 sqm in each pane fixed in bottom two pane in windows etc complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia or wire and an average width aparture 1.18 mm and fixed with tinned tack or stainless steel wire staple complete all as specified and directed.

S&F 100 mm Stainless steel butt hinges medium weight cold rolled fixed to PVC doors with SS screws complete all as specified and directed.

S&F 150mm long aluminum anodized barrel tower bolt of extruded section complete all as specified and directed.

S&F 100mm long aluminium handles cast type anodised ISI Marked

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc including rubbish off the premises beyond MOD land complete all as specified and directed. (Note :- Work to be carried out upto G+8 stories and rates are including for the same complete all as specified.)

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

Taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed. (Note :- Work to be carried out upto G+8 stories and rates are including for the same complete all as specified.)

M&L 15mm thick polymer modified readymix cement base plaster as per manufacturer instruction on fair / unfair faces of brick work or concrete surfaces of walls and finishing the surface even & smooth as per manufacturer instruction complete all as specified & directed.

M&L 5mm thick rendering of ready mix mortar of approved make (having ratio equivalent to CM 1:3) of ceiling surface finished fair even and smooth without using extra cement as whole or in patch complete all as specificed and directed.

M&L for 15 mm thick cement plaster in cement mortar 1:6 on brick or concrete surface (internal) etc. on wall finished even and smooth without using extra cement, all as specified .

M&L preparation of newly plaster surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and directed. (Note: Work be done through applicator approved. Make: Asian/Berger/Snowcem)

M&L for applying wall care putty not less than 1mm thick on wall / ceiling, surface even and smooth complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls/ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. (Note: Work be done through applicator approved. Make: Asian paint /Berger paint)

Demolition and breaking up drain pipes (SGSW, AC, PVC or reinforced cement) set in cement mortor internal dia of pipe 110mm complete all as specified and directed. (Note :- Work to be carried out upto G+8 stories and rates are including for the same complete all as specified.)

S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

Dismantling water tanks exc 250 ltr and n,cxe 500 Ltrs capacity and removing to store.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 sqm each complete all as specified

S&F Rotational moulded polyethylene water storage tanks tripple layered (cylindrical vertical with threaded lead) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 litres all as specified .

S&F in re-pair Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore, fixed in repairs.(Min Wt 20mm- 210 gms)

S&F for stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed.

M&L for providing & fixing semi perforated 12 mm thick micro tegular edged GRGfalse ceiling tiles at all heights with GRG (Glass fibre reinforced gypsum)false ceiling tiles of size 595x595 mm of approved texture, design and pattern having moisture content less than 2% humidity resustance of 99% NRC 0.50 to 0.75 as per IS 225: 1987, Noncombustible as per BS 476 (part 4) - 1970 and light reflectance of 85% (min) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120gms per sqm incl both sides) comprising of main T runners of size 15 x 32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondar intermediate cross - T of size 15x32mm of length 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised MS items (galvanising @80 grams per sqm) i.e 50mm long, 8mm outer dia M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws incl dismantling of existing ceiling boards. The work shall be carried out as per specifications, drawings and as per directions of the Engineer - in - charge.

Taking down/ out carefully aluminium point wiring for light/fan/bell/ sockets 5/15 Amp complete with switches,Sockets, holders,ceiling roses,light fitting regulators etc and making good the disturbed surface of wall/ceiling and matching with the existing surface, complete all as specifed and as directed.

M&L for point wiring with single core fire retardant low smoke PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) connected to common earth dolly and drawing through existing surface/concealed conduit pipe and in existing MS box/modular box covered with existing hylem sheet / modular plate (top cover) for mounting switches, sockets or fan regulators etc for the following :-

All as per item No.64 herein before but one socket outlet point 5 amps on the same board.

All as per item No.64 herein before but with 2.5 Sqmm cable for independent point and using 2.5 sqmm PVC single core copper conductor cable multistranded as earth wire complete all as specified and directed.

S&F modular switch flush type, 6 amps one way,SP,230 volts AC all as directed.

S&F modular socket outlet 6 amps 5 pin 2 module all as directed.

S&F modular socket outlet 6 & 16 amps complete all as specified and directed.

S&F modular switch flush type, 16 amps one way,SP,230 volts AC complete all as specified and directed.

S & F of Ceiling rose, 3 terminal , pvc/polycabonate, isulated body all as specified and directed.

S&F LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound, 20 Watt cool/warm white as per site requirement complete all as specified and as directed.

S&F of LED energy efficient integrated battens fittings, PVC extruded heat sink with shatter proof opal shell of polycarbonate compound 10 Watt , cool/warm white as per site requirement complete all as specified and as directed.

S&F in repair Modular Metal Flush Box 2 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface

S&F in repair Modular Metal Flush Box 3 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface

S&F in repair Modular Metal Flush Box 6 module duly embedded in wall in cement mortar 1:4 after chase cutting/cutting of wall tile or marble with cutter and matching/making good the existing surface

S&F in repair Modular white cover plate with frame 2 module all as directed

S&F in repair Modular white cover plate with frame 3 module all as directed

S&F in repair Modular white cover plate with frame 6 module all as directed

M&L cutting/opening of hole through out the wall as suitable for ventilation fan upto 250mm and making good the disturbed surface and all as per site requirement.

S&F of Ventilating fan upto 250 mm sweep plastic body type including self cousing louver and making all electric connections, complete all as specified and as directed.

Supply and fixing in replacement of Modular AC Socket with 25 Amps SP mini MCB, 230 Volts, 50Hz. In 4 module sheet metal enclosure complete all as specified and as directed.

Taking down of exhaust fan any type, size complete with blades, and depositing to MES store yard complete all as specified and as directed.

Refixing of exhaust fan any type size complete with blades, fastners including provision of flexible cable from conector to ceiling rose complete all as specified and as directed.

Supply and fixing exhaust fan upto 300 mm sweep metalic body type with inbilt grill and making all electric connections complete all as directed .

Taking down of geyser any type, size depositing to MES store yard complete all as specified and as directed.

Refixing of Geyser any type, size complete with, fastners, PVC Pipe including complete all as specified and as directed.

S&F Geyser 25 litre capacity vertical type with steel tank and glass inner linen , 5 star rating complete including fastners (4No.) for hanging and CP and PVC connection for inlet and outlet upto stop cock, complete all as specifed and as directed.