CERTAIN MINOR WORKS, LBW AND SPECIAL REPAIR TO ELECTRIC SUPPLY INSTALLATIONS AT DAMANA UNDER GE JAMMU

Amount

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m deep for foundation etc and getting out in any type of soil complete all as specified and directed

M&L plain cement concrete 1:4:8 type D-2 using 40mm graded agg as in foundations filling and in mass concrete work complete all as specified and directed

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed

M&L half brick thick brick work with sub class "B" bricks straigth or curved on plan exc 6m mean radius built in CM (1:4) complete all as specified and directed

Form work to soffits of suspended slab such as roof slab, floor slabs landing and similar work; n.exc 200 mm thick complete all as specified and directed

Use and waste form work to sides and soffits of floor or roof beams, lintel, cantilevers, shelves etc. including support of rough finished surfaces complete all as specified and directed

M&L RCC M25(Design mix)Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

M&L RCC M25 (Design mix) Slabs supported on walls, beams and columns ub floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed

M & L for Steel reinforcement TMT bars 10 mm dia and over cut to length, bent to shape and tying with annealed MS wire 0.9mm dia complete all as specified and directed

M & L for Steel reinforcement TMT bars 06 to 08 mm dia cut to length, bent to shape and tying with annealed MS wire 0.9mm dia complete all as specified and directed

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed

Rendering 10 mm thick on other than fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed

Rendering 5mm thick on brick work or concrete surface in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft / loose soil complete all as specified and directed

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point complete all as specified and directed

M&L spreading leveling in layers n exc. 25cm thick and well ramming complete all as specified and directed

M&L cement concrete type C-2(1:3:6), 100mm thick in sub base complete all as specified and directed

M&L broken brick Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and directed

S&F factory made single piece solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site complete all as specified and directed

M&L Providing and fixing of windows made of pre painted steel (Base steel as per IS 513 of 0.58mm thick "D" Quality galvanized as per IS 277 with zinc of 120 GSM. Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyed backer. Section for outer frame should be of 72 x 55mm, centre mullion should be 72 x 50 mm section for fixed glass beading should be 12 x 12 mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20mm provision for guard bars /grills fly mesh shutter section should be 20 x40mm. The sections are to be cut to length mitre jointed with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2 Nos of heavy duty stain less steel pivot hinges shall be provided per shutter. the windows should be paneled with 4mm thick float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/ masonry wall by means of self expanding screws, including 10mm square guard bars with 6" (152.4mm) pitch, complete for finished item of work including of all taxes complete all as specified and directed Make Elixir Metform Pvt Ltd or its equivalent

S&F Aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, complete all as specified and directed

S&F mild steel cold rolled butt hinges medium weight 100 mm long complete all as specified and directed

S&FAluminium handle, cast type, anodised 150 mm long complete all as specified and directed

M&L for applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified and directed

M&L for applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over alkali resistant primer complete all as specified and directed

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed

M&L Glazed ceramic tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed

M&L Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed

S&F vitreous china wash down water closet pan (pedestal pattern) of size 520 x 360 x 390 white including seat cover closed pattern with flat bottom complete all as specified and directed Make: Cera Cat Part No S1053102 or its equivalent

S&F PVC (SWR) P trap 110/110 mm bore complete all as specified and directed Make : Supreme/ Finolex

S&F PVC (SWR) floor trap plain including jointing with solvent cement 75 mm dia complete all as specified and directed

S&F PVC (SWR) reducer of 110 mm dia complete all as specified and directed

S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed

S&F PVC (SWR) WC connector with lip ring 110 mm complete all as specified and directed

Supply and fixing 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connection to pipe complete all as specified and directed Make Cera Cat Part No B1010102 or equivalent

S&F Vitreous china urinal flat back,size of 265 x 335 x 695 mm white including waste pipe 32mm dia GI pipe, grating and brass union for discharge pipe complete including providing and fixing plug bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screw pointing around urinal back in cement etc complete all as specified and directed by Engr-in-charge.Make: Cera Cat Part No S4020116 or equivalent.

S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed

S&F brass Urinal spreader of silver colour for fixing with 15 mm dia pipe complete all as specified and directed Make : Cera Cat Part No F8070201 or equivalent.

S&F vitreous china wash hand basin oval shape of size 560 x 430 x 205 mm with pedestal including bracket, cutting for and pinning the ends of brackets or erecting stands exclusive of waste pipe but including brass chromium plated waste coupling with long screwed sank and fly nuts complete all as specified and directed Make: Cera Cat Part No S2040108 or Equivalent.

S&F stainless steel soap dish bar fixed with and including Chromium plated brass screws and wooden/plastic cleats (minimumweight 300gms) complete all as specified and directed

S&F towel ring of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltr complete all as specified and directed

S&F Steel water tubing 15 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed

S&F Steel water tubing 20 mm bore medium grade galvanised with all fittings including short lengths, fixed to walls, or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) complete all as specified and directed

S&F Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore, complete all as specified and directed

S&F Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 20mm bore, complete all as specified and directed

S&F Bib taps fancy type, cast copper alloy, with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm, complete all as specified and directed

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm, complete all as specified and directed

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferrule of size 20 mm bore complete all as specified and directed

S&F 110 mm PVC (SWR), waste and vent pipes in any length with or without ears, with rubber ring joints laid in trenches or in floor complete all as specified and directed

S&F 75 mm PVC (SWR), waste and vent pipes in any length with or without ears, with rubber ring joints laid in trenches or in floor complete all as specified and directed

S&F 110 mm dia PVC Bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed

S&F 75 mm dia PVC Bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and directed

S&F grating doom 100mm dia of PTMT (minimum weight 25 gms) complete all as specified and directed

M&L 150 mm bore/Inner Dia. Double wall corrugated HDPE Pipes (SN8) with integral socket and necessary fittings, laid in trenches, including jointed and overlaping of pipe complete all as specified and directed Make : Astral, Supreme, Prince.

M&L for PCC 1:2:4 type B-1 (using 20mm graded cruched stone aggregate) as in benching, coping etc including necessary form work complete all as specified and directed

M&L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface fininished even and smooth without using extra cement including mixing of integral water proofing compound in the proportion as per manufacturers instructions complete all as specified and directed ( Note :- water proofing compound will be paid separately under respective item).

M&L for Pre-cast RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole cover slab fixed in position including necessary form work and set in CM 1:6 complete all as specified and directed

M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in surface channels and drains etc complete all as specified and directed

M&L for point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductor multistrand FRLS, PVC insulated (unsheathed) drawn into new concealed PVC rigid/steel conduit and into existing CI/pressed steel sunken/ terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and directed Note : (a) wiring shall be done by using proper colour coding (b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge.

Description all as per serial item No 65 here in above but One 5 pin socket outlet, 5amps, independent complete all as specified and directed

S&F for switch piano, flush type single pole one way 5Amp, 240 volts complete all as specified and directed

S&F for Switch socket outlet combined 5 pin 5 amp flush type, 240 volts complete all as specified and directed

S&F for Ceiling Rose 3 terminal surface type complete all as specified and directed

S&F for LED lights fitting 1x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (4' ft long ) with LED rod 20 watt, 230 Volts 50 Hz. complete all as specified and directed

S&F for LED lights fitting 1x 10W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95 , 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. (2' ft long ) with LED rod 10 watt, 230 Volts 50 Hz. complete all as specified and directed

M&L for distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed by Engr-in-Charge. Note:- Distribution board and MCBs should be same make.

S&F in 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed

Supply and fixing SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed

M&L for Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironl including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube flor watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and directed

S&F of earthing test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed

M&L for aluminium earth strip size 25X3 mm thick complete with replacement of MS saddle/Clamp,fixing screw etc for roof conductor and down conductor above ground and on wall complete all as specified and directed

S&F for GI tubing light grade complete with fitting and fixed to wall/ceilling floor 40 mm dia complete all as specified and directed

M&L for Air termination single pointed aluminium rod 12 mm dia and 300 mm long complete all as specified and directed

M&L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in pole foundation, stay pits etc including provision of necessary form work to aachieve fair finishes surfaces, complete all as specified and directed.

Material and labour in repair for earthing complete with galvanized steel plate earth electrode 60cm x 60cm x 6mm thick buried in ground vertically to a depth not less than 1.5 mtr below normal ground level connected to galvanized iron wire of 4 mm dia earth lead by means of bolts nuts and washers made of galvanized iron protected by 40mm bore light grade GI pipe up 7.5 Rm with 4mm earth lead and connected for body earthing of feeder pillar box all as specified and including PCC (1:3:6) type C2 pit and precast RCC (1:11/2:3) type A1 pit cover slab of size 300x300x50mm with handle as shown in drawing funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal and salt in alternate layers including necessary earth work and excavation in hard/ dense soil and removal etc, in electrical plate No 3 of SSR Part I 2009 complete all as specified and directed.

Supply and Fixing in replacement MCCB TPN 800 Amps , 415 Volts, 50 KA ,4 POLE, Ics=100% Icu ,overload adjustable short circuit adjustable type incl complete connection complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement MCCB TPN 400 Amps , 415 Volts, 50 KA ,4 POLE, Ics=100% Icu ,overload adjustable short circuit adjustable type incl complete connection complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement MCCB TPN 250 Amps , 415 Volts, 25 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit adjustable type incl complete connection complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement MCCB TPN 160 Amps , 415 Volts, 25 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit fixed type incl complete connection complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement MCCB TPN 100 Amps , 415 Volts, 16/18 KA ,4 POLE, Ics=100% Icu , overload adjustable short circuit fixed type incl complete connection complete all as specified and directed by Engr-in-Charge.

Disconnecting & taking out defective underground cable any size and any type from trenches, pole, pipe, floor, wall etc complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 400 sq mm 3½ core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 3½ core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sq mm 3½ core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sq mm 3½ core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3½ core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3½ core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3½ core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed

Supply, laying and testing cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed

Supply and fixing in replacement of GI tubing 80 mm bore (light grade) in trenches / floor / fixed along pole for cable / earth strip protection with proper size of clamps, nuts and bolts or for fixing lightening conductors etc complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of GI tubing 50 mm bore (light grade) in trenches / floor / fixed along pole for cable / earth strip protection with proper size of clamps, nuts and bolts or for fixing lightening conductors etc complete all as specified and directed by Engr-in-Charge.

M&L for dry sand cushioning for under cable with river washed sand and punning incl provision of layers of sand 8 cm deep before laying and 15 cm deep after laying the cable and stretching of cable complete all as specified and directed Note: Punned thickness of sand layer shall be paid to contractor

Material and labour in replacement of well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and as directed by the Engineer-in-Charge.

M&L for drilling hole of any size manually as per site requirement, drilling for laying pipes under the road for crossing electrical cables complete all as specified and directed by Engr-in-charge. Note: Pipe will be measured & paid for separately.

Supply and fix in repair of indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5/4.0 x 10-50 Sqmm complete all as specified and directed by Engr-in charge.

Supply and fix in repair of indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 70-150 Sqmm complete all as specified and directed by Engr-in charge.

Supply and fix in repair of indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 185-300 Sqmm complete all as specified and directed by Engr-in charge.

Supply and fix in repair of indoor/outdoor end termination joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 400 Sqmm complete all as specified and directed by Engr-in charge.

Supply and fix in repair of straight through joint heat shrinkable 1100 Volts for XLPE cable of size 3.5/4 x 25-50 Sqmm complete all as specified and directed by Engr-in-Charge. Note: Earth work will be measured and paid separately.

Supply and fix in repair of straight through joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 70-150 Sqmm complete all as specified and directed by Engr-in-Charge. Note: Earth work will be measured and paid separately.

Supply and fix in repair of straight through joint heat shrinkable 1100 Volts for XLPE cable of size 3.5 x 185-400 Sqmm complete all as specified and directed by Engr-in-Charge. Note: Earth work will be measured and paid separately.

Supply and fixing in repair On load change over switch with Sheet Steel Enclosure 415 V, 4 pole, 100 Amps capacity fixed on walls for electric supply distribution between main and DG set incl necessary connection of cables from LT panels to change over switches complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair On load change over switch with Sheet Steel Enclosure 415 V, 4 pole, 200 Amps capacity fixed on walls for electric supply distribution between main and DG set incl necessary connection of cables from LT panels to change over switches complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair On load change over switch with Sheet Steel Enclosure 415 V, 4 pole, 250 Amps capacity fixed on walls for electric supply distribution between main and DG set incl necessary connection of cables from LT panels to change over switches complete all as specified and directed by Engr-in-Charge.

Supply and fixing electric water heater geyser , storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr-in-Charge.

M&L for fixing of 4 Nos rawl plug of suitable size (4"-6") nuts & bolts for hanging of geysers on wall complete all as specified and directed by Engr-in-Charge.

M&L for Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLSH, cable of 2 run 4 Sqmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLSH, drawn through rigid PVC conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed by Engr-in-Charge.

S&F Industrial Plug ,MCB DB 3 Pin With eartg plug CRCA body with MCB 32 Amp complete all as specified and directed by Engr-in-Charge.

M&L for cutting to existing GI pipe of size 25/20/15 mm dia in position for addition/alteration or insertion of TEE for branch connection complete with cutting, threading and jointing/fixing including GI fitting as per site requirement complete all as specified and directed by Engr-in-Charge.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

DARVESH ENGINEERING WORKS