Construction of Barbed Wire Fencing 9000 rft. and DRSM 350 cum in Comptt. No. 72/U (DSCO)

Amount

FENCING ( IN RFT): Purchase of Fencing material: (i) 900 Nos. of PCC Sq. Posts conforming to SICOP product code PCFP-3. (ii) 18 Qtls. Of Black annealed Barbed wire conforming to SICOP product code BA-BW. Mechanical carriage of fencing material: 900 Nos. Sq. PCC Posts and 18 Qtls. Black annealed wire from factory to road side nearest possible road side including loading, unloading and its stacking. Head load carriage of fencing material: 900 Nos. Sq. PCC Posts and 18 Qtls. Black annealed wire from nearest possible road side to work site of closure. Site Clearence: Involving cutting of Bushes & other racks vegetation from closure 9000 rft through manual labour. Earth work: Digging of 900 Nos. of pits manually of size 1'X 1' X 1'-6" at 10' spacing along the pheriphery of fencing line. Fixation of PCC Sq. Posts. Fixing of 900 Nos. of PCC Sq. posts into the excavated pits manually including fixing of every 8th fence post along straight line and every fence post at the corner of the closure in cement concrete block of size 1'X 1' X 1'-6" in the ratio 1:3:6 ( 1 part cement: 3 part sand and 6 part stone aggregate). Also includes refilling of excavated soil into pits and complete ramming of soil around the PCC posts including cost and carriage of cement, sand and stone aggregate. Stretching of Black annealed wire. 4 strands along the fixed Sq. PCC posts covering 9000 rft manually with Black annealed wire. Painting of Sq. PCC posts. 900 No. Sq. PCC posts with ready mix syhthetic Enamel paint of approved brand and manufacture in all shade to give an even shade on all sides of each fence posts manually. Fixation of sign board and Gate/Stairs. Providing and fixing of iron board of MS sheet 3' X 5' of thickness 3mm (18 guage) embeded into 2 No. vertical angle iron 40mm X 40mm X 6mm (16 guage) 8' length including painting, writing, carriage upto site of closure and its fixation in cement concrete block and fixing of Gate/Stair of Iron angle as per design for crossing.

DRSM Works (in CUM) i. Clearance of site and disposal of unwanted material. ii. Earth work in excavation of foundation trench for DRSM Structure. iii. Breaking, Collection and Carriage of stones from near by area upto work site. iv. Construction of DRSM/Check Dams Structure across the slope and plugging the gullies to reduce the velocity of runoff water and allow the runoff water to get absorbed in Soil to enhance the ground water recharge and control the soil erosion and fashioning of stones to be used exposed the faces.

CHARAN DASS

SAHIL SINGH JAMWAL

M/S ROSHAN LAL

Raghbir Singh

KRISHAN LAL

Ankush Khajuria

M/S ARJUN SINGH CHHABRA

Vijay Bharat Gandhi Contractor