REPAIR/REPLACEMENT OF EXTERNAL AND PERIMETER LIGHTING, DRAIN COVERS, FENCING, CATTLE TRAPS AND FOOTPATH/HARD STANDING UNDER GE (WEST) JABALPUR

Amount

Excavation in post holes (or similar holes) each not exc 0.5 cum, getting out, in any type of soil including returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50m and making good surfaces complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2, using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Dismantling fencing wire mesh of any type & size etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed. Note: supply only chain link fencing, MS 10mm dia round bars as line wire and MS flat iron shall be measured and paid separately under respective item of this schedule.

Supply only mild steel galvanised, chain link fencing of 50x50mm mesh size and 3mm dia wire complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of strandard rails straining bolts, including securing and tying at crossing with and provisioning of galvanised mild steel wire, staples or steel pins, etc.complete all as specified and directed. (Note: Each line wire shall be measured for payment)

S&F mild steel posts and struts in fencing cutting top to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mess etc.) including all necessary drilling, bolting or reveting etc. and similar work conforming to Fe-290 (Gde E-165) complete all as specified and directed.

S&F in repair framed work suchas grills, grating etc with end of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, wlk ways, raailing, framed ork of water tanks and similar work confirming to FE 290 Gde E-165 complete all as spd

Supply only mild steel flat iron, round bars etc. in available length complete conforming to Fe-290 (Gde E-165) complete all as specified and directed. Note:- 10mm dia MS rods 3 Nos shall be provided horizontally by interwewaving in the chain link and welded with MS flat iron.

S&F mild steel screw bolts 5 to 10mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc. 5cm long complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.

M&L for brick work with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6

M&L for Brick work with old size, sub class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) but except bricks complete all as specified and directed.

M&L for 45mm thick precast cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in louvers or jallies (measured solid), including all mouldings but excluding frame, set in cement mortar (1:4) including taking down old Jallies complete all as specified and directed.

M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in lintels, copings apex stone, pier caps, columns, posts, boundry pillars, bed plates, anchoage blocks, bonders (stone walling), corbles brackets etc with plain fair faces, including chamfers weatherings, throating etc and setting in cement mortar 1:4 complete with joints to match all as specified.

Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering cement plaster 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing new plastered or un-plastered walls surfaces and applying three coats white wash complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered wall surfaces including brooming down or steel wire brushging, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered wall surfaces including brooming down or steel wire brushging, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint complete all as specified and directed.

M&L for applying one coat of weather proof emulsion on old treated surfaces of white or tinted including preparation of old decorated surfaces etc all as directed by Engr in charge.Make:- Apex from Asian paints or equivalent in Berger Paint

M&L for preparation of old painted steel surfaces of any description exc 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surface of any description not exc. 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surface of any description not exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc or for shaft, wells, cesspits, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and directed.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material (soil), not exc 50m and depositing where directed at level not exc 1.5m above the starting point complete all as specified and directed.

Demolition and breaking up drain pipes (slat glazed stoneware, AC or RCC) set in cement mortar for 300mm bore of pipe complete all as specified and directed.

M&L for 300mm bore, reinforced concrete pipes, class NP-2, laid and jointed complete with collars all as specified and directed.

M&L for cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in bed to drain pipes including packing under and hunching against the sides of pipe after they are laid and tested for 300mm bore of pipe complete all as specified and directed.

M&L for forming fair finished drain or channel 30Cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for PCC 1:3:6 type C2 (40 mm graded stone agg) as in surface channel and drains etc complete all as specified & directed.

M&L for Broken glass coping on top of wall in cm 1:3 20 mm thick etc all complete.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for slab of culvert complete all as spd

M&L for Reinforced cement concrete 1:2:4 type B-1 (20mm graded stone agg) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves and the like, complete all as specified and directed.

Form work to soffits of shelves,lintels,beams etc. for rough finish surface complete all as specified.

S & F in repairs 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints , laid in trenches/ floor/wall etc all complete.

S&F TMT Bar 6 to 8 mm dia and over cut to length bend to shape required incl cranking bendding spirally, hooking for ends and bindding with MS wire (annealed) not less than 0.9 mm dia complete all as directed.

Ditto all as per above item but 5mm dia and over upto and including 10mm dia as in stirrups. Spacers and binders etc all complete.

Taking down steel gate exc 6 Sqm but n.exc 12 Sqm any weight and refixing the same opening on bearing after repairing , painting of gate and making good distrurbed portion etc complete all as specified & directed.

S&F Welded steel wire fabric supplied and fixed complete to wood or steel members weight not exceeding 4 kg per sqm etc all complete.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished. In steps, jambs, pillars window cills and cooking platform and like in cement mortar in cm 1: 4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 20mm thick screed bed in CM 1:4 etc complete all as specified and directed.

Demolition of bamboo framing any type in walls incl att all bamboo trellis work etc all complete.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in (Concrete, brick work,masonry), .portion and making good disturbed ground surface etc all complete.

Desilting/removal of debries and earth from bed of drain and removal the same to a distance up to 50 M etc all as specified & directed.

Dismantling wrought iron or mild steel work of any description etc all complete.

S&F Providing Precast cement concrete soild block 1:3:6 Type C1 using 20mm graded stone aggregates as in kerb stone edging inCM 1:4 etc all as specified and directed by Engineer -in- charge.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete etc all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

M&L for 100 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/hard standing and finishing the surface even and fair without using extra cement complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size conforming to IS 15658- 2006 of 60mm thickness, M-35 grade laid over and including 50mm thick sand coushning etc complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C2 using 40mm graded stone aggregate as in plinth protection etc all complete.

M&L for preparation for new concrete for Surfaces and applying two coats of synthetic enamel paint any description or plain or moulded, over 10cm width or girth when unconnected with other painting or when painted in a different tint complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) etc all as specified and directed.

M&L for 100 mm thick PCC 1:2:4, Type B2, using 40 mm graded aggregate as in paving/path finished fair and even complete etc all as specified and directed.

M&L for chequred cement concrete tiles 20cm X 20cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry as in floors layed over and including 20 mm screed bed complete etc all as specified and directed.

Repair and maintenance of building security light / Garden lights/ Gate light any type/make installed on, building by means of replacing any unserviceable parts as and when required complete with labour including taking down, dismantling, reassembling and re-fixing the fitting at its original location with proper alignment and making good all defects including replacing of nuts/bolts/PVC connections etc and keep the light fitting in working condition through out the period of contract at one time payment complete all as specified and directed. Note :- Defective / worn out parts/ fittings measured and paid seperately as supply only relevant items.

Supply, fixing and connecting in replacement LED street light fitting 25 Watt having LED as light source, optical system, heat sink and drivers into one compact housing which ensure the LEDs have a long life, colour temperature - cool white (5700K) , nominal voltage 240 voltage, system efficay >75lm/W, pressure die cast aluminium housing, gear-integrated electronic driver, CRI - 70, protection IP-65/66, class - I complete all as specified and directed by the Engr - in - charge. Make - Make - Bajaj Cat Part No ENXT P 30L WH CR PC SD or Wipro Cat part No LR02-291-XXX-57-XX or equivalent in Havells, Philips

Supply, fixing and connecting in replacement LED street light fitting 35 Watt having LED as light source, optical system, heat sink and drivers into one compact housing which ensure the LEDs have a long life, colour temperature - cool white (5700K) , nominal voltage 240 voltage, system efficay >75lm/W, pressure die cast aluminium housing, gear-integrated electronic driver, CRI - 70, protection IP-65/66, class - I complete all as specified and directed by the Engr - in - charge of Make Bajaj Cat Part No ENXT P 36L WH CR PC SD or Wipro Cat part No LR06-501-XXX-57-XX or equivalent in Havells, Philips

Supply & Fixing in replacement post top luminaire globes suitable for FPS 31070 fitting etc complete all as specified and directed of Make - Wipro /Philips/Bajaj /CG

Supply and fixing in replacement decorative gate light made up of high grade unbreakable polycarbonate material suitable for retrofit B 22 base LED of 20 watt etc complete all as specified and directed of Make gate light LHFXBON1TN5Q020 of Havells of equivallent make, Make for LED lamp 20 watt- Philiphs or Equivalent make as approved by the GE

S&F in replacement of GI pipe bracket ,made out of GI pipe 40mm dia light grade 1.5mtr long bend to the shape 120 degrees angle all as per site requirement including MS clamps made of F1 50x6mm complete with nuts, bolts & washer as per requirement for mounting fittings.

Supply, fixing and connecting in repairs PVC insulated, round,sheathed, multicore, industrial flexible cable with bright annealed copper conductor, 1100 volts grade cable of size1.5sqmm, 3 core, confirming to IS 694-1990 etc complete all as specified and directed

Supply, fixing and connecting in replacement LED top post lantren, decorative luminaire with diffuser, 240 volts, 50 Hz, 30/40 watts with mounting arrangement etc complete all as specified and directed by the Engr-in-charge of Make : Lukar cat no LPL 430 or eqvt C&S, BAJAJ cat no , Havells

Supply only non dimmable LED lamp 7 watt, B22 base, 6500K, 600 lumen etc complete of Make Philips or equivalent model of Havells, Crompton Greaves

Supply only non dimmable LED lamp 45 watt, B22 base, Lumen flux -4500lm, CCT-6500K,PF>0.90 complete of Make Philips or equivalent model of Havells, Crompton Greaves

Supply only Holder B-22 base, Plastic body, suitable for B-22 base 45 watt LED lamps of Make Anchor, HPL, Plaza

Supply , laying and testing in replacement cable XLPE insulated , screened, PVC bedded , galvanized , steel strip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 10sqmm 2 core complete all as specified and directed by Engineer in charge of Make- Polycabe, Havells

Supply,laying & fixing in repairs double wall corrugated (DWC) pipes made of high density polythyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc.. all as specified and directed by Engr in Charge.of size 50 mm outer dia and 38 mm inner dia of Make;-Telerex/Tirupati or E-in-C approved Make

Supply fixing in repairs connecting and testing of Automatic Street light switch using infrared Sensor based Nature Switch for automatic switching of street lights, Nature switch operation should be based on Natural light lux level. Required illumination level for switching on is < 30 lux and for switching off > 10 lux. The sensor should also have part night operation facility for 4 - 12 hours. The sensor alongwith suitable power contactor, incoming-outgoing MCBs should be enclosed in a pole/wall moutaed enclosure made out of Rust proof, electric shock proof, termite proof and FR grade SMC junction box conforming to IP-54, The circuit should be suitable enough to take 8 kw single phase load with contactor 63 Amps conforming to IEC-60947-4-1/IS-13947-4-1 & incoming and outgoing MCBs of rating 63 Amps conforming to IEC-60898/IS-8828 and circuit wiring of minimum 16sqmm coper conductor wire in and including providing of 50x6mm flat iron clamp, necessary nuts and bolts complete incl taking down of existing arrangement all as specified and directed by the Engr-in-charge. Make of nature switch - Model No Swadeep-02EC8kw1P of Kakatiya Energy System or equivalent make of Bajaj/Healer, Make for Contactor- BCH/L&T/Schneider, Make of MCBs- Hager/Schneider/L&T/C&S, Enclouser - Sintax or equivalent

Supplying and fixing in repairs 1100 volts grade heavy duty cable PVC insulated aluminium conductor 10 sqmm, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of Make - Plaza/Polycab/ Finolex

S&F in repairs sub main wiring complete with two run of 2.5 Sqmm FRLS PVC insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends including provision of 1 run of 1.5 Sqmm insulated copper FRLS cable for earth continuity conductor and connecting to earth dolly etc complete all as specified . Note : Unit rates quoted by contractor shall be deemed to included for cutting chases in walls and making good in cement morther (1:3) and finishing the surface to match with exisiting surface.

Ditto all as per above item but 2X4.00 sq mm +1X2.50 Sqmm Earth Wire including PVC Conduit ISI Marked 20/25 mm

Ditto all as per above item but 2X6.00 sq mm +1X4.00 Sqmm Earth Wire including PVC Conduit ISI Marked 20/25 mm

Ditto all as per above item but 2X10.00 sq mm +1X6.00 Sqmm Earth Wire including PVC Conduit ISI Marked 25/32 mm

Material and labour for providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) for garden light foundation including fixing of switch socket combination 15 Amp necessary form work and finished the surface complete all as specified and directed by Engr in charge.

Sachdeva Enterprises

ANAMIKA CONSTRUCTION