Road safety work on the Korauna to Ramgarh chini mill road

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface P/L hot applied thermoplastic compund 2.5 mm thick including reflectionsing glass beads @ 250gms per sqm area, thickness of 2.5mm is exclusive of suraface applied glass beads as per IRC:35 the finished surface to be level, uniform and free from streak and holes. (Including Zebra Crossing and Edge Line)

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated Bar/Transverse Bar Marking) Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. Morth-803 (8.13)-Base.

Supply, fixing & eraction of built up Cantilever Structure 6 m span comprising of one vertical posts of 6.00 M height made up of 300 mm NB heavy class MS pipe as vertical member welded with 10 mm MS plate at top & 12 mm M S plate at bottom. The horizontal Truss shall comprise of 50 mm dia heavy class M.S. pipe and 40 mm dia heavy M S pipe as bracing & 10 mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100 mm thick Lean Concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia Foundation Bolts 600 mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearances and complete. Installation work shall be as per relevant clauses of MORT&H specification section 800 and IRC 67 2010 complete in all respect The Rates shall include cost of design fabrication, supply, transportation, Local shifting Erection of Signage structure using crane, inclusive of all taxes royalty, VAT etc. all T&P machine, material and labour required for proper completion of work as per direction of Engineer-in-charge.

Providing & fixing of reflective signs with a corrosion resistant 4mm thick aluminium composite panel face to be fully covered with High intensity prismatic sheeting type IV as per IRC-67:2010 retro reflective sheeting with MS angle frame of 35x3. For Cantilevr

Retro-reflactrorised Traffic sign as per IRC67-2012 Providing and fixing of retro reflectroised cautaionary mandatory and informatory sign as per IRC 67-2012 made of High intensity grade sheeting vide clouse 801.3 friced over aluminium sheeting type IV 1.5 mm thick supported on miled steel angle irone post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M-150 grade cemnent concreat 45cmx45cmx60cm below ground level as per approved drowing. the retro reflective sheeting tested for 3 years outdor wethering test in indian conditions as per IRC 67:2012 & proof of the same in form of goverment report shall be uploaded while quoting tender. Morth 801 (8.4) One each side (0.80x 0.60)

Hazard Marker