Construction of Toll Plaza Administrative Building at Vagaikulam Toll Plaza Km 17/000 on the Tuticorin -Tirunelveli Section of NH-138 in the State of Tamil Nadu on Item Rate Basis

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in roack requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification including all other incidental charges and as directed by Engineer

Supplying and filling basement for gravel material with conveyed earth from 10km including all other incidental charges and as directed by Engineer

Plain cement concrete for M15 as per drawing and technical specifications

PCC (M15 Grade)

Supply, straighten, handle, cut bend, crank, fix and tie in position in all RCC items of work including cost of GI binding wire 18SWG complete. (On actual length measurements of fabricated steel work , including authorised lappages only at theoritical weight for different sections payment will be made) including all other incidental charges and as directed by Engineer

HYSD TMT Bars

Reinforced cement concrete M25 as per drawing and technical specifications

RCC (M25 Grade)

Brick work in following Cement Mortar using best quality II Class Ground Moulded chamber burnt bricks of size (190 x 90 x 90) mm for foundation and basement including curing, etc., complete complying with standard specification including all other incidental charges and as directed by Engineer In basement, In basement ( Partition Wall ) and basement above (Main Wall)-Cement mortor 1:3

Plastering-Prepare surfaces and plaster with CM 1:3(1 cement, 3 sand) ,20mm minimum thick for all platering area

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including necessary plaster of paris putty,wherever requied etc.,complete comply with standard specification including all other incidental charges at Ceiling painting, Outer wall painting, Inner wall Painting for entire toilet block and as directed by Engineer

Newly Constructed Roof / Bathroom/Toilet/ balcony/utility with Cementatius Waterproof coating below 500 Sq.m - Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break >120% as per ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification.

Flooring -Floor Tiles (600x600x8mm)

Supplying and fixing steel ladder for 1st floor

NATIONAL HIGHWAYS AUTHORITY OF INDIA, MADURAI REGION.

Construction of Toll Plaza Administrative Building at Vagaikulam Toll Plaza (Km 17+000) on the Tuticorin – Tirunelveli Section of NH-138 (Old NH-7A) in the State of Tamil Nadu on Item Rate Basis

(SOR 2025-26)-Estimate abstract-Toll Plaza Admin Building Joineries,Eletrical and plumbing items

Pre-Painted Galvanized Iron Fixed Louvered Ventilators with Glass and Grill: Providing and fixing louvered ventilator fabricated from roll formed sections made of galvanized steel colour coated / powder coated (Base steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams / sqm.) with total coated thickness of 0.58mm. Paint specification: Coated sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns. Dimensions of sections: The section for external frame should be of 57mm x 33mm. Fixing details: The section should be cut to length, joined with profile to profile component. Accessories: Glass holding flanges made of glass filled nylon. Glass: Louvers should be provided with 4mm pinhead glass. Grill: Ventilator should be provided with grill made of 10mm Square MS bars to 12mm x 5mm flat at 4 intervals. Total grill unit should be powder coated and fixed to ventilator frame with screws. The above frames should be fixed to brick / concrete masonry

Supplying fabrication and supply of Teak wood grill door-MD of (2/3 of grill and 1/3 of paneled) including cost and conveyance of all materials to site

Supplying fabrication and supply of country wood grill door-D1 of (2/3 of grill and 1/3 of paneled) including cost and conveyance of all materials to site

Solid panel PVC door with frame-D2 including all other incidental charges and as directed by Engineer

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing,bonding, cutting, grinding, conveyance, welding charges,bonding, cutting, grinding, conveyance, welding charges,electrical charges, etc. complete

Construction of bore well 150 mm dia including boring all classes of soil, soft rock & hard rock with 150 mm PVC encasing pipe required from 12m to 20m depth all other incidental charges and as directed by Engineer

Supply and fixing of Submersible motor 3HP Single Phase including erection of pump set, cost and fixing of Panel board, starter, cables upto required depth with 40mm HDPE water pipe line along etc. including all other incidental charges and as directed by Engineer

PVC Water Tank-including all required fittings & other incidental charges and as directed by Engineer

Supply & fixing of rain water pipe 110mm dia 6 kg including all other incidental charges and as directed by Engineer

Wiring with 2x1.5sqmm (22/0.3) PVC insulated unsheathed SC Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3 mm thick hylum sheet cover with TW switch box and 5A F.T.switch and making good of the concealed portion with suitable colour for PVC concealed light point (For Rooms Like Bath , Toilet & Pump room etc..) (6 Points/ coil) (SD-26) including all other incidental charges and as directed by the engineer.

Supply and fixing of 3 Nos. 5Amps (3 Pin& 2pin combined flush type wall socket with control switches concealed in suitable TW Box covered with Xylem sheet in flush with wall with earth connection (For Plug Socket) (SD-139) including all other incidental charges and as directed by the engineer.

Supply and fixing of WT bulk head fitting with guard (Philips/Bajaj/Crompton ) suitable for 11 W CFL Lamp (SD-83) including all other incidental charges and as directed by the engineer.

Supply and Fixing of single box type 4'36W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads

Supply and fixing of 300 mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall. ( SD 114 ) including all other incidental charges and as directed by the engineer.

Supply and fixing of louvers shutters arrangements for 300 mm (12") sweep (light duty) AC exhaust fan. ( SD 120 ) including all other incidental charges and as directed by the engineer.

Supply and Fixing of Horizontal type 4 way triple pole neutral MCB DB in sheet steel enclosure with Double Door with,1No 63A Four Pole with Isolator as incoming and 8No's 6A to 32A SP MCB and 1 No 32 A FP Isolator as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCB DB and MCB's should be with the ISI mark (Like Legrand / Hager /Siemens make). (Service Connection & Power Distribution boards)

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour. ( SD 57 ) (power Plug) including all other incidental charges and as directed by the engineer.

Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V on 7/20 GI bearer wire for service connection mains . ( SD 68 ) including all other incidental charges and as directed by the engineer.

Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in 32mm dia GI pipe (Class'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD-73) including all other incidental charges and as directed by the engineer.

Supply and fixing of 63 A 4 Pole Change Over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing including all other incidental charges and as directed by the engineer.

32 Amps TPN Metal Clad Switch with Re-wirable Fuse Units

Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.

Provision for EB Connection including TNEB meter fixing charges and including Registration charges (Will be paid as per actuals on production of receipts) including all other incidental charges and as directed by the engineer.

1.5 TR Split Type AC Unit - 3 Star Rated

AC Ceiling Fan complete 1200 mm (48”) Sweep with 300mm Down Rod (without Regulator)

Water supply pipe line ( Concelled)-25 mm

Delivery line (from over head tank)-32 mm

Waste water line ( From washbasin to chamber)-75 mm

Sanitary line ( from closet to chamber)-110 mm

Sanitary line ( Main chamber to septick tank intel)-160 mm

Elbow -25 mm

Elbow -32 mm

Elbow -75 mm

Elbow -110 mm

Tee-25mm

Tee-32mm

Tee-75mm

Tee-110mm

Nahani Trap

Reducer-32mm X25mm

GI reducer-25mm X20mm

Bend-110mm

Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia 'B' Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples, 15mm CP Pillar Tap etc - (Colour with Pedastal)

Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm P or S trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) with 10 litres capacity flushing tank with all internal dual flush fittings with normal seat cover Wall Fitting

Supplying and fixing of White Glazed Porcelain Oval Shape Special Type Urinal of size 382 x 398 x 601mm

Supplying and fixing cp Towel rod- fixing with necessary screws,located in shower area etc., complete including all other incidental charges and as directed by Engineer

White Porcelain Sink of size 600mm x 450mm x 200mm with 32mm dia 'B' Class GI Waste Water Pipe and 32mm dia CP Waste Coupling

Total Amount for Toll Plaza Admin Building Joineries,Electrical and plumbing items

NATIONAL HIGHWAYS AUTHORITY OF INDIA, MADURAI REGION.

Construction of Toll Plaza Administrative Building at Vagaikulam Toll Plaza (Km 17+000) on the Tuticorin – Tirunelveli Section of NH-138 (Old NH-7A) in the State of Tamil Nadu on Item Rate Basis

(SOR 2025-26)-Estimate abstract-Toll Plaza Admin Building Compound Wall

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in roack requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification including all other incidental charges and as directed by Engineer

Supplying and filling basement with conveyed earth from 10km including all other incidental charges and as directed by Engineer

Plain cement concrete for M15 as per drawing and technical specifications

Reinforced cement concrete for M25 as per drawing and technical specifications

Supply, straighten, handle, cut bend, crank, fix and tie in position in all RCC items of work including cost of GI binding wire 18SWG complete. (On actual length measurements of fabricated steel work , including authorised lappages only at theoritical weight for different sections payment will be made) including all other incidental charges and as directed by Engineer

HYSD TMT Bars

Step-1-RR Masonry 1:3 in Foundation including all other incidental charges and as directed by Engineer

Step-2-RR Masonry 1:3 in Foundation including all other incidental charges and as directed by Engineer

Brick work in following Cement Mortar using best quality II Class Ground Moulded chamber burnt bricks of size (190 x 90 x 90) mm for foundation and basement including curing, etc., complete complying with standard specification including all other incidental charges and as directed by Engineer In basement, In basement ( Partition Wall ) and basement above (Main Wall)-Cement mortor 1:3

Plastering-Prepare surfaces and plaster with CM 1:3(1 cement, 3 sand) ,20mm minimum thick for all platering area

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including necessary plaster of paris putty,wherever requied etc.,complete comply with standard specification including all other incidental charges at Ceiling painting, Outer wall painting, Inner wall Painting for entire toilet block and as directed by Engineer

Supplying and fixing Steel Grill gate

Total Amount For Admin Building

NATIONAL HIGHWAYS AUTHORITY OF INDIA, MADURAI REGION.

Construction of Toll Plaza Administrative Building at Vagaikulam Toll Plaza (Km 17+000) on the Tuticorin – Tirunelveli Section of NH-138 (Old NH-7A) in the State of Tamil Nadu on Item Rate Basis

(SOR 2025-26)-Estimate abstract-Toll Plaza Misscelaneous works

CAT 6A UTP Armoured Cable

Power Cable

High mast-4 core 16sq.mm PVC copper UG cable

Other- 4 core 25sq.mm PVC copper UG cable

PVC pipe-110mm-3 Rows

Total Amount For Admin Building