Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹68.2 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹84.6 L+₹15.6 L (22.6%)Rejected-Finance | L2 | Rejected-Finance Being not lowest tenderer | |
| 3 | L3₹93.0 L+₹24.1 L (34.9%)Rejected-Finance FLAT NO 330 PKT 1 SECTOR 1 DWARKA NEW DELHI 110 075 | NEW DELHI | NEW DELHI | DELHI | 110075 | L3 | Rejected-Finance Being not lowest tenderer | |
| 4 | L4₹97.2 L+₹28.2 L (40.9%)Rejected-Finance | L4 | Rejected-Finance Being not lowest tenderer | |
| 5 | L5₹1.0 Cr+₹35.0 L (50.8%)Rejected-Finance 0 00 NEAR KRISHNA PETROL PUMP GEEDAM ROAD JAGDALPUR BASTAR CHHATTISGARH 494001 | BASTAR | CHHATTISGARH | 494001 | L5 | Rejected-Finance Being not lowest tenderer |
Tender Value
₹97.7 L
EMD Value
₹1.7 L
Closing Date
2 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF TUGHLAKABAD
HQ CWE AF TUGHLAKABAD AF STATION, TUGHLAKABAD PO SANGAM VIHAR NEWDELHI-110080
ADDN/ALTN/IMROVEMENT OF LIVING-IN-ACCOMODATIONS AND MESSES AT AF STN TUGHLAKABAD UNDER GE (AF) TUGHLAKABAD
2023_MES_621127_1
CWE/TKD/TOKEN-47 OF 2023-24
Open Tender
Civil Works
Item Rate
365 days
GE (AF) Tughlakabad
As per NIT conditions
8 documents required · 8 mandatory
₹1,000
GE (AF) Tughlakabad
₹1.7 L
Yes
27 Dec 2023
29 Sept 2023
4 Nov 2023
29 Sept 2023
2 Nov 2023
19 Oct 2023
Amount
M&L for ISI marked Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top) hoisted and fixed in position all as specified in SSR part-I for capacity 500 liters incl hoisting and fixing at speciifed location complete all as specified and directed
M&L for ISI marked Rotational moulded polyethylene water storage tanks (cylindricalvertical with closed top) hoisted and fixed in position all as specified in SSR part-I for capacity 1000 liters incl hoisting and fixing at speciifed location complete all as specified and directed
Taking down of15 mm bore galvanised iron tubing and connection including cleaning for refixing the same at position specifed on walls, ceiling or laid in floor complete all as specified and directed. Note: (ii) Rates quoted by the contractor deemed to be included S & F new fittings as required
S&F 15mm bore GI tubing ISI marked medium grade with all fittings to wall and ceiling or laid in floors including taking down and removal from site complete all as specified and directed.
S&F 20mm bore GI tubing ISI marked medium grade with all fittings to wall and ceiling or laid in floors including taking down and removal from site complete all as specified and directed.
S & F 20 mm bore ball brass valves (Float valve) high pressure with polythene float and fly nut complete screwed to iron pipe or brass ferrule complete all as specified
S & F 20 mm bore Gun-metal, globe or gate valve with iron wheel head, screwed both ends for ironc pipe all as specified and as directed
S & F 15 mm bore stop valve/angle cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe all as specified and as directed
Taking down chowkats or frame with shutter (PVC DOOR AND WINDOW VENTILATOR) (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site all as specified and directed
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction.
S & F for 30 mm thick factory made solid panel both side prelaminated PVC door shutter with smooth finish confirming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded both side prelaminated PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide both side prelaminated PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross both side prelaminated PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick both side prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick both side prelaminated PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed.
Providing and fixing ISI marked aluminium butt hinges of size 100x75x4 mm anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete all as specified and directed
Providing and fixing 150 mm aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete
Providing and fixing aluminium tower bolts of size 150 x 10mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
Taking down chowkats or frame with shutter (without taking off shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed
S & F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. tube, supplying & Fixing in opening as per specification & drawing etc complete and as directed.
S & F 30 mm thick 2nd class Hard wood glazed skeleton shutters open rebated and prepared to receive guage etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauze etc having dimension as per Section 8.24(a) of SSR part- I and fitted to chowkats complete all as specified and directed.
Demolition of concrete of any descrition and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge.
M & L for PCC 1:2:4 type B0 in lintels upto 1.5m clearspan, cills, steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets andrailings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles etc complete all as specified & directed.
S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.
Providing and fixing aluminium sliding door bolts 300x16 mm, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : all as specified & directed.
Providing and fixing aluminium work for frame/shutter/fixed portions of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per specified and directed. (Glazing, paneling to be paid for separately) : (Mim Thickness of Section shall not be less than 1.5 mm)((minimum thickness of polyster powder coating 50 micron) NOTE:- The purchase Voucher of Alumnium Section shall be submitted for claiming payment. Non Submission may lead to non payment
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment)(Pattern Deco Gril).
Providing and fixing glazing With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) NOTE:- The purchase Voucher of Float glass shall be submitted for claiming payment. Non Submission may lead to non payment
S&F 12 mm thick Block board, grade 2 quality,interior grade, commercial type used in partition wall etc complete all as specified & directed.
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.
S & F stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood/alumium beading and fixed with tinned tacks to stainless steel screws etc complete all as specified & directed.
M & L 10 mm thick rendering in CM (1:6) on vertical surfaces of brick walls finished even and smooth without using extra cement etc including taking down and removal from site complete all as specified and directed.
M & L 15 mm thick rendering in CM (1:4) on vertical surfaces of brick walls finished even and smooth without using extra cement with using water proofing compound etc including taking down and removal from site complete all as specified and directed. (WPC will be measured and paid separately)
M & L for rendering 5 mm thick on ceiling on fair faces of concrete surface in Cm 1:3 finished even and smooth without using extra cement etc including taking down and removal from site complete all as specified and directed..
M & L for preparation of new plastered surfaces of walls and applying two coat of Oil Bound distemper over and including a coat of primer of approved tint, complete all as specified.
M & L preparation of newly plastered surfaces and applying two coats of cement base paint over and including a coat of primer on walls etc complete all as specified & directed.
M & L preparation of newly plastered surfaces and applying three coat of white wash on ceiling etc complete all as specified & directed.
M & L preparation of old plastered surfaces and applying one coats of cement base paint walls over and including a coat of primer etc complete all as specified & directed.
M&L for preparation of old plastered surface of ceiling and applying two coat of white wash complete all as specified and directed by Engr-in-charge
M&L preparing old distempered surfaces of wall and applying one coat of oil emulsion distemper over and including a coat of primer etc complete all as specified and as directed.
M&L for preparation of old painted wooden surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint over and including a coat of primer etc complete all as specified and as directed.
M & L preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint over and including a coat of primer etc complete all as specified and as directed.
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and as directed.
Providing and fixing on wall face Single socketed pipes unplasticised Rigid PVC (SWR) water pipes of 110 mm bore conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,including fixing to walls with MS clamps including taking down of old pipe of any size and discription and removal from site complete all as specified and directed
S & F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed
S & F 110 mm bore of pipe PVC (SWR) single ,(Single T) equal or unequal with door etc complete all as specified & directed
Providing and fixing on wall face Single socketed pipes unplasticised Rigid PVC (SWR) water pipes of 75 mm bore conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,including fixing to walls with MS clamps including taking down of old pipe of any size and discription and removal from site complete all as specified and directed
S & F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed
S & F 75 mm bore of pipe PVC (SWR) single ,(Single T) equal or unequal etc complete all as specified & directed
S & F 75 mm bore of pipe PVC (SWR) floor trap,plain with grating incl jointing with solvent etc complete all as specified & directed
BLANK
M&L for 75 mm thick, PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in path , plinth protection and paving laid in panels finished even and smooth without using extra cement complete all as specified and directed. Note:- The groove demarcating panels shall be filled with hot blown bitumen
BLANK
M & L 40 mm thick PCC 1:2:4 type B0 using 12.5 mm graded aggregate using water proofing compound as in sunken floor(WPC shall be measured and paid separately)
M & L applying evenly a coat of blown type bitumen at the rate of 1.50 kg/sqm and binding with clean dry sand @ 0.05 cum per sqm etc complete all as specified & directed.
M & L for rendering 15 mm thick in CM 1:3 with using water proofing compound (WPC shall be measured and paid separately) all as specified
Supply only integral water proofing compound of approved quality
M & L PCC 1:7:12 type F2 as in sub base of floor mass filling using 40 mm graded aggregate with using water proofing compound etc complete all as specified
Material and labour for First quality Non-skid Ceramic coloured tiles jointless, 7-8 mm thick (area of each tile exceeding 0.09 Sqm but not exceeding 0.16 Sqm) laid in floors with neat cement slurry @ 3Kg/Sqm over and including 15mm thick screed bed of cement mortar (1:6) and including pointing in white cement with pigment to match the shade of tiles complete all as specified and directed.
Taking down shutters of any description and refixing the same in same opening or other opening exceeding 1.00 sqm but not exceeding 2.00 sqm each etc complete all as specified.
Dismantling of cast iron drain pipe jointed in lead joints or cement joints and taking out if required etc complete all as specified.
S & F 100 mm dia Sand cast iron S&S pipe as per IS: 1729 soil waste and vent pipes , ISI marked in any length with or without laid in trenches or in floor with cement joints etc complete all as specified.
S & F 100 mm dia Sand cast iron S&S pipe as per IS: 1729 soil waste and vent pipes ISI marked in any length with or without fixed to walls or in floor with cement joints etc complete all as specified.
S & F cast iron floor trap with grating of 100 mm size including jointing to waste pipe with cement joints etc complete as directed
S & F 100 mm bore cast iron bends/double T of any radius diminshing pieces or tappers (larger bore measured) etc complete all as specified.
S&F in repair vitreous china wash basin, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket 32 mm dia brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and as directed.
Supply and fixed in repair 15 mm dia bore pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and flynuts, screwed for iron pipe and fixed complete all as specified and as directed.
S&F 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and as directed. Note:- The contractor shall submit Purchase Voucher
Providing and fixing flexible P.V.C. waste pipe of 32 mm dia for sink or wash basin including P.V.C. waste fittings complete all as specified and directed.
S & F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm etc complete all as specified.
S & F in repair 15 mm chromium plated cast copper alloy bib taps with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.
S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.
S&F in repairs wash down water closet EWC floor mounting incl all necessary accessories etc complete all as specified and as directed.
S&F Health Faucet with 1.5 mtr long SS tube and hook etc complete all as specified and as directed.
S & F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle etc complete all as specified & directed.
Demolition of brick work or stone/boulder masonry, built in cement mortar incl. all quoins arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and directed.
M&L brick work in CM (1:6) with sub class ‘B’ bricks straight or curved on plane exc 6m mean readius,used in drain, boundary wall,compound wall complete all as specified and directed by engr in charge.
Dismantling floor,hearth or wall tiling including cement motrar bedding cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises.
Providing and laying Double charge vitrified tile polished finish in floor in Size of Tile 600 x 600 mm (thickness to be specified by the manufacturer(avg thickness not less than 10 mm) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid over and including15 mm thick cement mortar 1:6 (1 cement: 6 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete all as specified and directed. NOTE: - (i) The tiles must be cut with the zero chipping diamond cutter only . (ii) Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (iii) The contractor shall submit Purchase Voucher
BLANK
Providing and fixing 1st quality ceramic glazed tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades and of any size as approved by Engineer-in-Charge in skirting, risers of steps, dados and vertical surfaces over and including 10 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete all as specified and directed.
Dismantling plain or corrugated steel sheeting any gauge,thickness,incl Nainital or similar pattern roof covering etc complete all as specified.
S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.
Dismantling of wrought iron or Mild Steel work of any description complete all as specified and directed .
S & F joist, channel, angle, or tee sections,hollow tube fixed independently, with connecting plates, etc (cut to ordinary lengths i.e. with in 20 mm of the length indicated to Fe 410-W (Gde-E-250 quality-B) complete all as specified and directed.
M&L for gunniting to RCC works in column beams, slabs, chajja, facia, landing, balconies etc by dismantling of RCC (loose concrete) and chipping of unsound/weak concrete material with manual Chisel and/ or by standard power driven percussion type and cutting of steel bar including cleaning the exposed concrete surface and reinforcement with wire brushes etc , after that cleaning the steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry and placing steel bars at location where the balance steel dia is less than half including fixing the steel bars in position using epoxy resin anchor grout of approved make and painting with ant rust coating on exposed steel. The surface then be fixed by welded with hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed (dia of wire shall not be less than 4mm) & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement. The surface then be treated with epoxy bonding adhesive having coverage 2.20sqm/kg of approved make and providing gunniting with a minimum pressure of 2 to 2.5 Kg sqcm and providing, mixing and applying 25mm thick gunniting of SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications complete all as specified and directed by Engineer-in-Charge. Note:- (i) The quoted rate shall be inclusive of all the works. (ii) Work to be carried out as in patches as directed by Engr-in-charge (iii) Rate for scaffolding upto fifth storey shall be included in quoted rate. (iv) All demolished material removed from MOD land completely distance exe 5 km. (v) The prepared area shall be neatly cleaned (vi) The rate of TMT shall not be included in the quoted rate.
M&L TMT steel bars 6mm to 8mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specified.
BLANK
Providing and fixing stainless steel ( Grade 304) railing/stairs (framed) including stringers, treades, landing, balusters made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and including fitting accessories the same with necessary stainless steel nuts and bolts complete all as specified and directed, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of GE, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). NOTE:- The Contractor shall submit Purchase Voucher and the same shall be defaced by the Engr-in-Charge and fwd along with bill for claiming payment. Non-Submission may lead to non-Payment.
BLANK
Providing and fixing special quality 50mm bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete all as specified and directed.
Providing and fixing Triple strip vertical type magnetic catcher of approved quality in cupboard /ward robe shutters, including fixing with necessary screws etc. complete.
Supply and fixing in repair 6 mm thick PVC ply with suitable fully threaded steel screws etc on the backing of rack,drawer,cubboard,kitchen cabinet,racks,almirah partition under kitchen counter etc all complete as per direction of Engineer-in- charge.
Supply and fixing in repair 12 mm thick PVC ply with suitable fully threaded steel screws etc in partitions, boxes, shelves, racks and cupboard, kitchen cabinet, racks almirah partition under kitchen counter etc all complete as per direction of Engineer-in- charge.
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. NOTE:- (i) The Contractor shall submit purchase voucher for claiming the payment. (ii) (Payment of providing and fixing auto closing hinges shall be paid separately)
Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
Providing and fixing 200 mm stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge.
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge..
Schedule of Credit
akenterprises
The new hut furnitures
M/S S.K.Electricals
POOJA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .