CERTAIN REPAIR WORK TO CHARPOY GI HARD TOP AND WOODEN FURNITURE ALONGWITH POLISHING AND RECANNING UNDER BSO OF GE (WEST) PATHANKOT

Amount

Removing damaged/unserviceable parts of Chair dinning and supply & fixing of new teak wood parts duly polished in two coats after prepration of surfaces with using bamboo pin and fevicol. Any parsts loose of chair also to be tightened tight by using fevicol and providing 8 nos triangular wooden brackets. In case, if any part will found damaged while repairing the already damaged part, the responsibility thereoff shall be on the contractor to make good the damage made while reparis. Rest all as per the Engr-in-Charge. (Drg no. FD-16, FD-228, FD-279) Front Leg of Chair dinning

Rear Leg of Chair dinning

Back rest of Chair dinning

Stiffner of Chair dinning

Rear and side rails and make holes for canning as shown in drg

Removing damaged/unserviceable parts of Chair writing and supply and fixing of new teak wood parts duly polished in two coats after prepration of surfaces with using bamboo pin and fevicol. Any parsts loose of chair also to be tightened tight by using fevicol incl providing 8 nos wooden brackets of triangular shape. In case, if any part will found damaged while repairing the already damaged part, the responsibility thereoff shall be on the contractor to make good the damage made while reparis. Rest all as per the Engr-in-Charge. (Drg no. FD -20, FD-202, FD-250, FD-280) Front leg

Rear Leg

Back Rest

Stiffner

Hand rest

Front/rear/side rail and make holes for cannin

Removing damaged/unserviceable parts of chairs easy and supply and fixing of new teak wood parts duly polished in two coats after prepration of surfaces with using bamboo pin and fevicol. Any parsts loose of chair also to be tightened tight by using fevicol incl providing 8 nos wooden brackets triangular shape. In case, if any part will found damaged while repairing the already damaged part, the responsibility thereoff shall be on the contractor to make good the damage made while reparis. Rest all as per the Engr-in-Charge. (Drg no. FD-17, FD-201, FD-229 etc) Front / Rear Leg

Hand rest

Front/rear/side rails and make holes for canning

Back frame except back rest

Back rest

Stiffener of size 50 x 25 mm under seat of the chair easy as shown in drawing

Chair dinning cushioned/ Chair dinning Offr (Drg no. FD/E6/MAP/10 etc) Removing of U/S Front leg and S & F new front leg made out of teak wood size all as per drg and directly Engr-in- Charge

Removing of U/S rear leg S & F new rear leg made out of teak wood size all as per drg and directly Engr-in- Charge

Removing of U/S Side rails /Front rails/ Rear rails of S & F of New Side rails/ Front rails rear rails made out of teak wood size all as per drawing and directed by Engr-in-Charge

Removing of U/S Back verticle stiffener size 30 x 15 mm and S & F new back verticle stiffener size 30 x15mm made out of teak wood all as per drawing and directed by Engr-in-Charge

Removing of U/S Stiffener size 20x15mm and S & F New Stiffener size 20 x15 mm made out of teak wood all as per drg.

Removing of U/S Cushing material/Tapestry coth and Ply wood seat of chair dinning cushioned and S&F New seat made from ply wood 12mm thick 5 ply and upholstringof chair with new tapestry cloth of Min Price range of Rs 150/Per Mtr of approved shade with foam sheet 75mm thick 40 Density all as per drawing.

Supply of Cushion for Dressing Stool of size 420x260x50mm thick of 40 density duly upholistered with tapestry cloth of price not less to 200 per Mtr shade quaility of father foam complete all as specified and directed. (Drg No. FD/E6/MAP/14 etc)

Removing damaged/unserviceable Cane plastic from wooden furniture and material and Labour for recanning with Cane 2mm wide cane (colour of white/ivory) as per godrej pattern all as specified shown on drawing and and border of 4mm thick cane of similar colour rest as directed. Make of cane , Shah Brand, primier, maharastra Cane) Rest all as per the direction of Engr-in-Charge. (Drg No. FD-16,17, 20, 56, 201, 202, 228, 229, 250, 279, 280, 27, 282)

BED HARD :- S&F of 12mm thick ply wood commerical 6ply (single piece) after removing old damaged / sagged ply. Ply wood shall be fixed with proper worksmen ship to be properly fixed in the longrails and short rails complete all as specified and as per the direction of Engr-in-Charge. (Drg no. FD 246)

S&F long rail of bed of size 75x50x1980mm made out of 1st class teak wood duly wrought and ends slightly rounded off, made to shape including taking out the old broken/cracked raill all as shown on drawing and all as directed.

S&F stiffeners of size 40x50x900mm made out of Ist class teak wood, duly wrought made to shape including taking out the broken/okd stiffeners all as specified and directed

S&F in position head rest including legs made out of well seasoned Ist class teak wood frame, supply and fixing 4mm thick plywood one side teak faced on the frame including taking out the old broken/decayed head rest all as specified and directed

S&F in position foot rest including legs made out of well seasoned Ist class teak wood frame, supply & fixing 4mm thick ply wood one side teak faced on side of the frame including taking out the old broken/decayed foot rest all as specified and as directed

M&L for French polishing of bed after cleaing the surfaces (old or new) with sand/empty paper refiling the borer holes/cracks with putty (wherever required) applying the raw sienna/burnt sienna as per requirement, make the surface smooth again with sand/empty paper to the entire satisfaction of Engr-in-charge.

CHAIR WRITING MAP & FD (Drg no. FD/E 6/MAP/12 & FD-1107) S&F of seats of chair cushioned writing after removing old damaged or wornout seats with cushion of 28 (d) to 32 (d) as per requirement and tapestery cloth of approved pattern from Engr in charge

S&F of backs of chair cushioned writing after removing old damaged or wornout seats with cushion of 28 (d) to 32 (d) as per requirement and tapestery cloth of approved pattern from engr in charge.

S & F box complete box of table dressing gents with drawers and knobs made out of 18mm thick PPB Teak shade all as per drg after removing old damaged box.

TABLE DRESSING LADIES (Drg no. FD-32, FD-251 etc) M & L for providing following partrs of Table Dressing Ladies including removing of old unsv parts complete all as spfd and as directed by Engr-in-Charge including french polishing :-

S&F complete Box for Table Dressing Ladies of size 1200mm x 600mm made out of 18mm thick PPB exterior grade melamine faced with drawers. ISI marked with and including aluminium channel 12mm x 22mm all round complete.

TABLE WRITING (Drg no. FD-33/ 249 etc) S&F following parts of the table writing:-

Table top of size 1200mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete all as specified and directed.

Replacement of Leg with teak wood (Seasoned, without cracks, joints)

Replacement of side rail with teak wood (Seasoned, without cracks, joints)

Replacement of Stiffener with teak wood (Seasoned, without cracks, joints)

TABLE 900MM X 600MM X 760MM WITHOUT DRAWERS (Drg no. FD-42, 55 & 231 etc) S&F for providing following parts including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :-

Front or rear rail

Side rail

Stiffener

Table top of size 900mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete

TABLE DINNING FOR 6 PERSONS (Drg no. FD-273 FD239 FD-1115 etc)

Table top of size 1500mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including POLISHED beading 4mm x 18mm all round complete.

Front or Rear rail

Side rail

TABLE 900MM X 600MM X 760MM WITH DRAWERS (Drg no. FD-283 etc) S&F for providing following parts including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :-

Front or rear rail

Side rail

Stiffener

Table top of size 900mm x 600mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete

Drawer with lock complete as per drg as directed

TEAPOY (Drg no. FD-034, FD-278, FD232 etc) S&F for providing following parts of Teapoy including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :-

Front or Rear leg

Front or Rear rail

Side rail

Top of size 600mm x450mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete.

TABLE PEG (Drg no. FD-25, FD-277, FD-236 etc) S&F for providing following parts of Table Peg including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots. :- :-

Side rail

Table Top of size 450mm x 300mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete.

Front or Rear rail

TABLE CENTRE (Drg no. FD-292/ 352/ 74 etc) S&F for providing following parts of Table Centre including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots :-

Front or Rear leg

Front or rear or side rail

Table Top of size 900mm x450mm made out of 18mm thick PPB exterior grade malamine faced, ISI marked complete.

TABLE 900MM X 900MM X 760MM (Drg no. FD-88) S&F for providing following parts of table 900mm x 900mmm x 760mm including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots. :-

Table top of size 900mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete

TABLE DINNING 1200 X 900 X 760 MM OR SIMILAR TABLE OF SIZE (Drg no.FD-30 FD-273 FD239 FD-1115 etc) S&F for providing following parts of table dinning 1200 x 900 x 760 mm including french polishing and also dismantling & removing of old unsv parts from the frame complete all as spfd and as directed by Engr-in-Charge parts shall be made of teak wood, well seasoned, free from cracks & knots. :-

Table top of size 1200mm x 900mm of 18mm thick PPB exterior grade melamine faced, ISI marked with and including beading 4mm x 18mm all round complete

Front or Rear rail

Polishing the following items of furniture with French polish after cleaning and removing the durt with sand paper and prepration of surfaces with approprate wood putty and suitable colour, rubbing and cleaning it with sandpaper and applying two coats of wood polish for glossy look:-

Chair Dining (Drg no. FD-16, 223& 279)

Chair writing (Drg no. FD-20, 250)

Chair Easy (Drg no. FD-16, 223& 279)

Sofa set five seats (Drg no. FD-373)

Book Case (Drg no. FD-45 & 237)

Bed Ply Top (Drg no. FD-246 & 247)

Table dining for 6 (Drg no. FD-39, 239, 273)

Table writing (Drg no. FD-41, 42)

Table dressing Gents (Drg no. FD-230)

Table dressing Ladies (Drg no. FD-31, 32)

Peg Table (Drg no. FD-25)

Table 3’ x 2’ (Drg no. FD-88, 284 & 284)

Table centre (Drg no. FD-274)

Teapoy wooden (Drg no. FD-382, 232 & 34)

Side Board (Drg no. FD-75)

Sofa set 4 seats (Drg no. FD-281/373)

Table dining 8 pers (Drg no. FD-39, 239, 273)

Removing existing old and unserviceable long rail from charpoy GI pipe and supply and fix new long rail of GI Pipe 32 mm bore medium grade ISI marked threaded at both end fixed in position complete all as directed and shown on drawing. (Drg No. FD-220)

Removing existing old and unserviceable short rail of charpoy GI and fabricationand fixing of short rail by cutting and converting from long rail obtained vide Srl item No 2 here in before threading both end complete all as shoiwn on drawing and as directed by Engr-in-Charge. (Drg No. FD-220)

Removing existing old and unserviceable legs from charpoy GI pipe and babrication and fixing of legs by cutting and converting from short rails as obtained srl Item No 22 here in before cutting and threading at one end and supply and fixing MS plate 3 mm thick, 40 mm dia by welding at other and of legs including provision of two parellel MS clamps made of 25x3 mm flat iron duly welded from MNF set fixed in position and painted with two coats of synthetic enaml paint black over coat of red oxide primer complete. (Drg No. FD-220)

Removing existing old unserviceable GI check nut from the frame of charpoy GI 32mm boreand supplying and fixing of new check nut, fixed in position all as shown in drg and as directed. (Drg No. FD-220)

Removing existing unserviceabel GI elbow 32mm dia from the frame of GI charpoy and supply & fixing of new Elbow GI 32mm ISI Marked and fixed in position all as shown in drg as directed. (Drg No. FD-220)

Material and labour for electric welding of long/short rails, legs of GI Charpoy frame of size 32mm and 25mm by continuous welding around with the joint complete all as specifed and as directed by Engineer-in-Charge. (Drg No. FD-220)

Removing exising old/wornout/unserviceable 12mm thick ply top / MDF top from the top of charpoy GI 32 mm and replacement of 12mm thick plywood with single peice ply from long rail to longrail and short rail to short rail properly fixed by supply and fixing and make it fit with 6mm smooth head nut bolts with two nos washirs. (Drg No. FD-220)

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit (Rs. 75,721.50) and if any other reduction.

Walia trading co (BID ID -3446906)

M.B TUBE AND ALLIED IND. Contr (BID ID -3446440)

VEE KAY IND (BID ID -3452453)

JP AND CO. (BID ID -3452077)

M/S PREMI CONSTRUCTION CO (BID ID -3446542)

M/S INDAN FURNITURE MART (BID ID -3445794)