REPAIR REPLACEMENT TO ROOF PLASTERING DOOR INCL FLOOR TILES PLASTER AND OTHER MISC WKS IN TRIDENT OFFICER MESS INTERNAL ELECTRIFICATION AND OTHER MISC BR AND EM WK IN THE AREA OF AGE BRII UNDER GE NORTH DELHI CANTT

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) of wooden/steel n.exc 1.5 sqm.

Taking down shutters of any description exc 1 sqm and n. exc 2 sqm each.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, all as mentioned in Item No. 8095 of SSR Part-II.

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made cut of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on other side and as gap inserted for top rail & bottom rail , panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, as per product Drg given on Sl. Page No. 157 of SSR Part-II 2010

S & F butt hinges 100mm size Medium weight cold rolled mild steel fixed complete all as specified.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long.

S&F aluminium alloy handles anodised, fabricated type of size 150 mm.

Taking up or down steel water tubing and connections 20mm bore pipe complete all as specified and directed.

M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.

Refixing of old steel tubing and connections with all new fittings in new or old position ( wall/floor/ceilings etc ) of size 20 mm bore complete all as specified.

Taking up or down steel water tubing and connections 15mm bore pipe complete all as specified and directed.

M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.

Refixing of old steel tubing and connections with all new fittings in new or old position ( wall/floor/ceilings etc ) of size 15 mm bore complete all as specified.

Demolition of cement concrete( unreinforced ) in ground floors and pavings n.exc 15 cm thicness ( below of above ground level )

M&L for Non skid, coloured ceramic joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but nexc 0.18 sqm of approved colour, set, jointed in cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including 15 mm thick screed bed in CM 1:6 etc complete as in flooring all as specified and directed.

M&L for glazed coloured ceramic digital tiles in dado/vertical surface (350mm x250mm x 7 mm/450x300x7mm) thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 10 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for digital Vitrified Ceramic coloured tiles10 mm thick (square/rectengular) polished, area of each tile n. exc 0.36 sqm as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the surface including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as above but on vertical surface as in skirting ,including 10 mm thick rendering in CM 1:3 even on fair faces of brick work including taking down cement plaster complete all as specified and directed by Engr-in-Charge.

M/L PCC 1:4:8, type D2, (using 40 mm graded crushed aggregate 75 mm thick as in sub floor, Sub base, floor complete all as specified & directed.

M&L for coloured precast cement concrete interlocking tiles 60 mm thick, M-35 grade of any shape and size, conforming to IS-15658-2006 glossy finish as in floor/pavement laid on 75mm thick stone dust cushioning, laid dry to the profile over rammed earth/murrum filling complete all as specified & directed.

M&L for Chequered cement concrete tiles of size 300x300x20mm thick, set and jointed in neat cement slurry in floor and pointed with grey cement and pigment including 20mm thick screed in CM 1:6 for bed layer complete all as specified & directed.

M/L PCC 1:2:4, type B1 using 20mm graded stone agg as in bencing,roof kerb, bends and coping.

M&L for providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified.

M/L PCC 1:2:4, type B1 40mm thick fair finished surfaces .as in flooring using 20 mm graded crushed stone aggregate.

M/L PCC 1:2:4, type B-0 25mm thick fair finished surfaces .as in flooring using 12.5 mm graded crushed stone aggregate.

Roughning surfaces of old concrete floor by picking , sweeping clean and washing down with water to remove dust etc and brusshing neet cement slurry @ 3 Kg/Sqm all as spd and dir.

Taking down cement plaster of any description & thickness from brick/concrete sufaces of wall/ceiling etc including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:4)on brickwork/concrete surfaces complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6)on brickwork/concrete surfaces complete all as specified and directed.

M&L preparation of newly plastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

M&L preparation of newly plastered surface on walls and applying two coat of Oil Bound Distemper over a coat of primer complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for preparation of old surfaces by Complete removal of existing treatment & levelling of wall surface using mechanical / electrical operated sanding / scraping machine within-built vaccum suction system to suck the existing treatment as retrieved by scrapping/sanding etc and applying two coat of Oil Bound Distemper over a coat of primer by using Air-less paint sprayer over 3mm thick water proofing wall care putty in two or more layer on prepared surfaces of wall . complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old decorated previously treated surfaces of wall by brooming down scrapping down smoke and efflorescent salts etc and applying one coat of white wash on walls complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old decorated previously treated surfaces of ceiling by brooming down scrapping down smoke and efflorescent etc. omplete and applying one coat of white wash complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for one coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10 cm width or grith complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall and applying one coats of weather proofing exterior acrylic emmultion paint complete all as specified and directed.

M&L for complete removel of existing treatment on old plastered surfaces of wall and applying two coats of weather proofing exterior acrylic emmultion paint, complete all as specified and directed.

S & F in repair Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing ( Note : PVC frame shall be measured seperately ) including dismantling boarding, any description, fixed in any position with hidden nails complete all as specified.

S & F in repairs 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing to wall to make PVC Frame as per specification and drawing.

M&L for 300X450 X 7-8 mm th Elevation wall tiles of approved colour,pattern / design set and jointed in neat cement slurry and pointed with white cement with pigment to match over and including 10mm thick rendering in CM 1:4 complete complete in all respect all as specified and directed.

M&L for non-skid coloured ceramic Endura or similar approved industrial out door tiles 10mm thick, (square/rectangular), area of each tile exceeding 0.09 sqm but nexc 0.18 sqm, in floors etc. set & jointing in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying floor finish,complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on walls complete all as specified and directed.

Demolition of cement concrete( sunken portion) in any of description and in any position not other wise specially provided , all as directed and specified.

M&L for digital vitrified coloured tiles x10 mm thick in floors etc. area exc .42sqm but n exc 1sqm set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile laid over & including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for digital vitrified coloured tiles 10 mm thick as in dados/skirting area exc .42sqm but n exc 1sqm including10mm thick rendering in cement morter 1:4 all as specified and directed.

M/L as in repair 18- 20mm thick granite (of any type) work (table rubbed and polished) as in pillars, steps and set with neat cement slurry over 15 mm th screed in CM 1:4 including pointing with coloured cement to match with shade of granite all as specified.

M&L for PCC 1:3:6 type C2 using 40mm graded stone agg as in foundation, filling and mass concrete all as specified and as directed.

M&L for machine cut kota stone 18-20 mm thick over and including 15 mm thick cement screed base in CM 1:4 laid and jointing with neat cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

S & F Gl frame work for step up and down designer seamless ceiling and wall lining comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including taking down of old ceiling, complete in all respect as specified and directed. Note: Entire work to be executed through authoried rep of manufacturer.

M & L for step up and down designer false ceiling & wall lining with 12 mm th Gypsum board as per as per approved design & pattern fixed with screw or as per manufacturers instructions including taping form work etc complete in all respect as specified and directed. Note: Entire work to be executed through authoried rep of manufacturer.

M&L for applying 3 mm thick water proofing wall care putty as in ceiling on gyp board/POP/RCC surface, rubbing and cleaning complete to get the surface even and smooth and applying two coats of OBD over a coat of primer including preparation of surfaces all as specified and directed.

S & F in repair 10 mm thick toughened glass as in partition including diamond edging all sides,eatching, lining and monograme area nexc 0.50 sqm each by sand blasting , including CP "L" or "U" heavy duty clams suitable for fixing of glass , min 4 nos per sqm all as spd and directed.

S&F in repair oval type counter Wash Basin of size 63x50 Cm complete all as specified and directed. Make: Hindware cat part no 10045 equivalent in other make as mentioned in list of approve make.

S & F in repair fancy type CP bib tap 15 mm dia with non corrosive coating with wall flange screwed down for iron pipe or for brass ferrule and fixed all as directed and specified Make Jaquar Cat part no. ALI -85037 ) or equavilant in other make as mentioned in list of approve make.

S & F in repair angular stop cock with wall flange cast copper alloy C.P with non corrosive coating 15 mm bore screwed down, high pressure screwed both ends for iron pipes or for union all as directed and specified. Make Jaquar Cat part no. ALI85053 ) equivalent in other make as mentioned in other make as mentioned in list of approve make.

S & F in repair 2 way bib cock with wall flange cast copper alloy C.P with non corrosive coating 15 mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified. Make Jaquar Cat part no. ALI 85041 ) or equivalent in other make as mentioned in other make as mentioned in list of approve make.

S& F in repair 15 mm dia CP Central hole basin mixer single lever with out popup with 450mm brodal house complete all as specified. Make Jaquar Cat part no. ALI 85011B ) or equivalent in other make as mentioned in other make as mentioned in list of approve make.

S & F in repair brass CP toilet paper holder complete all as specified Make Jaquar Cat part no. CAN 1153N ) or equivalent other make as mentioned in list of approve make.

S&F in repair composite pattern vitreous china wash down water closet pan 'P' trap or 'S' trap (pedestal pattern, of any colour, twin flush system including soft close seat cover all as specified and directed by Engr In Charge. Make Jaquar Cat part no. VGS-WHT-81851PN ) or equivalent.

S & F in repair CP Towel rack consisting of three rod of size 60cm long, fixed to wall with suitable rawl plug all as specified and directed in Engr in Charge, Make Jaquar Cat part no.ACN 1181FHN ) or equivalent

S&F in repair Glass Shelf 600mm long with chromium plated guard bar fixed to wall all as specified and directed by Engr in charge.Make Jaquar Cat part no. AKP 35771P ) or equivalent

S&F in repair corner glass self of 5.5mm thick with chromium plated guard bar fixed to wall all as specified and directed by Engr in charge. Make Jaquar or equivalent

Taking down carefully copper / aluminium point wiring (light / fan socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, fan regulators etc for taking credit including making good the disturbed surfaces to match with the existing all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, using colour coding, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit/casing caping medium grade complete with and including all PVC conduit accessories surface on wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc complete all as specified and directed for One light / bell point/fan/socket on independent board controlled by one, one way switch 06 Amps.

All as per above item no 68 here in before but One socket outlet 5 Amps controlled by one switch on same board

All as per above item no 68 above but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for socket out let 16 Amps on independent board

All as per above item no 68 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 4 sq mm PVC insulated unsheathed copper cable as earth continuity conductor

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, using colour coding, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall/Surface on wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for One light / bell point/fan/socket on independent board controlled by one, one way switch 06 Amps

All as per above item no 72 here in before but One socket outlet 5 Amps controlled by one switch on same board

All as per above item no 72 but wiring with 2.5sqmm copper wire and 2.5sqmm earth wire for socket out let 16 Amps on independent board

All as per above item no 72 but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 4 sq mm PVC insulated unsheathed copper cable as earth continuity conductor

Material and labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, using colour coding, unsheathed FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of modular metal flush box, modular white cover plate with (inner and outer) frame, blanking plate etc suitable for up to 16 module and accessories etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for One light / bell point/fan/socket on independent board controlled by one, one way switch 06 Amps

All as per above item no 76 but one 3 pin, 06 Amps socket outlet point on same board controlled by one, one way 06 Amps switch.

All as per above item no 76 but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 1.5 Sq mm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed.

All as per above item no 76 but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 4 sq mm PVC insulated unsheathed copper cable as earth continuity conductor

Supply & fixing switch piano flush type, 06 Amps, single pole, one way, 230 volts complete all as specified & directed.

Supply & fixing bell push, flush type, 06 Amps, 230 volts with switch frame complete all as specified & directed.

Supply & fixing switch piano flush type, 16 Amps, single pole, one way, 230 volts with switch frame complete all as specified & directed.

Supply & fixing socket outlet 2 in 1, 5 pin, 06 Amps, flush type, 230 volts with socket frame complete all as specified & directed.

Supply & fixing socket outlet 2 in 1, 5 pin, 06/16 Amps, flush type, 230 volts with socket frame complete all as specified & directed.

Supply and fixing in repair ding dong bell, AC, 230 volts, single pole complete all as specified & directed.

Supply and fixing ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, socket type, humfree, AC, 230 volts, 100 watts, duly ISI marked with and including white surround complete all as specified & directed.

Supply and fixing ceiling rose, 6 Amps, 230 volts, AC, ISI marked with three equal size terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete all as specified & directed.

Supply and fixing lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting including 7W LED bulb complete all as specified & directed.

Supply and fixing LED bulb 9W inverter type upto 4 hrs back up, 6500K and remove the UNSV bulb and all as specified and directed.

Supply and fixing modular switch, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed.

Supply and fixing modular bell push with indicator,06 Amps, single pole, one way, 230 volts, complete all as specified & directed.

Supply and fixing modular switch, with indicator, 16 Amps, single pole, one way, 230 volts, one module complete all as specified & directed.

Supply and fixing modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed.

Supply and fixing modular socket outlet 02 in 01, 05 pin, 06 /16 Amps, 02 module with shutter complete all as specified & directed.

Supply and fixing Modular fan regulator 2 module, stepped type of 0 to 04 rotary steps, electronic, socket type, humfree, AC, 230 volts, 100 watts, duly ISI marked with and including white surround complete all as specified & directed.

S&F in repair 5W LED fitting (1 ft) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete

S&F in repair 10/12W LED fitting (2 ft) attractive wall mounted type suitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete.

Supply and fixing in repair on wall / ceiling LED batten lighting fixture 18 watts LED 6500K (4'), with Polycarbonate housing and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, complete all as specified and directed.

Supply and fixing in repair on wall / ceiling LED batten lighting fixture 18 watts LED 4000K (4'), with Polycarbonate housing and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, complete all as specified and directed.

Supply and fixing in repair on wall / ceiling LED batten lighting fixture 20 watts LED 6500K (4'), with Polycarbonate housing and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, complete all as specified and directed.

Supply and fixing in repair on wall / ceiling LED batten lighting fixture 20 watts LED 4000K (4'), with Polycarbonate housing and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, complete all as specified and directed.

Supply and fixing in repair on wall / ceiling LED batten lighting fixture 22 watts LED 6500K (4'), with Polycarbonate housing and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, complete all as specified and directed.

Supply and fixing in repair on wall / ceiling LED batten lighting fixture 22 watts LED 4000K (4'), with Polycarbonate housing and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, complete all as specified and directed.

Taking down of existing u/s recess light fitting and supply & fixing recess mounting 34/36 Watts in CDL, 2x2 LED flat panel complete with envornmental friendly, ultra modern recess mounting luminaries with high brightness SMD LEDs as light source suitable for ceilings high etc including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as directed.

Taking down of existing u/s recess light fitting and supply & fixing recess mounting 34/36 Watts in warm , 2x2 LED flat panel complete with envornmental friendly, ultra modern recess mounting luminaries with high brightness SMD LEDs as light source suitable for ceilings high etc including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as directed.

Taking down of existing u/s Surface light fitting and supply & fixing mounting 34/36 Watts in CDL, 2x2 LED flat panel complete with envornmental friendly, ultra modern mounting luminaries with high brightness SMD LEDs as light source suitable for ceilings high etc including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as directed.

Taking down of existing u/s surface light fitting and supply & fixing mounting 34/36 Watts in warm , 2x2 LED flat panel complete with envornmental friendly, ultra modern recess mounting luminaries with high brightness SMD LEDs as light source suitable for ceilings high etc including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block complete all as directed.

Supply and fix LED crystal glass tube 18 Watt light double side connection ultra bright with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders. Make : Havells Cat part No: CRYSTAL1213T8DSTL20WLED865SGLASS/ Philips /Wipro

Supply and fix LED crystal glass tube 18 Watt light Single side connection ultra bright with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders. Make : Havells Cat part No: CRYSTAL1213T8DSTL20WLED865SGLASS/ Philips /Wipro

Supply and fix LED crystal glass tube 20 Watt light Single side connection ultra bright with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders. Make : Havells Cat part No: CRYSTAL1213T8DSTL20WLED865SGLASS/ Philips /Wipro

Supply and fix LED crystal glass tube 20 Watt light double side connection ultra bright with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders. Make : Havells Cat part No: CRYSTAL1213T8DSTL20WLED865SGLASS/ Philips /Wipro

Supply and fix18 Watt ultra bright LED tubelight with aluminium heat sink and polycarbonate diffuser having high efficiency suited for installation in existing T5 fitting with G5 lamp holders driver outside . Make : Havells Cat part No: TITANIASLEEK1149T5DSTL18WLED865SPC or equivalent in Philips /Wipro

Supply and fix 9 Watt ultra bright LED tubelight with aluminium heat sink and polycarbonate diffuser having high efficiency suited for installation in existing T5 fitting with G5 lamp holders driver outside . Make : Havells Cat part No: TITANIASLEEK549T5DSTL9W LED865SPC or equivalent in Philips /Wipro

Supply and fixing in repair energy saving buiilding security light fitting of 70 watts LED environmental friendly pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 40 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

Supply and fixing in repair energy saving buiilding security light fitting of 45 watts LED environmental friendly pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 40 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

Supply and fixing in repair energy saving buiilding security light fitting of 25/30 watts LED environmental friendly pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 40 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed.

Supply and fixing in repair on wall energy saving, eco friendly LED bulk head fitting 10Watt, IP 65surface mounted with ABS body & polycarbonate diffuser, etc and all accessories pre-wired including connecting up, complete all as directed.

Supply and fixing in repair ultra bright compact 6/8 Watt round LED downlighter recess/surface with high efficiency LED,s idealy suited for low ceiling areas to give glare light IP-54 in 6500K with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 95 mm mm dia hight max 83 mm recess luuminaries all as specified and directed.

Supply and fixing in repair 12 Watt round LED panel recess mounting downlight in 4000K with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 145mm mm dia hight max 35mm recess luuminaries all as specified and directed.

Supply and fixing in repair 12 Watt round LED panel recess/surface mounting downlight in CDL with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 145mm mm dia hight max 35mm recess luuminaries all as specified and directed.

Supply and fixing in repair 15 Watt round LED panel recess/surface mounting downlight in 4000K with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 145mm mm dia hight max 35mm recess luuminaries all as specified and directed.

Supply and fixing in repair 15 Watt round LED panel recess/surface mounting downlight in CDL with integraed driver to delivered superior light output and uniformity utilising the latest LED technology, ceiling cutout 145mm mm dia hight max 35mm recess luuminaries all as specified and directed.

Repair of earth pit incl required exacavation, earth work and PCC work to make good damaged/disturbed surfaces of earth pit chamber & making new pit cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced and lifting handle on RCC cover with 8 mm MS bars at 150 mm centre to centre both ways incl supply & fixing of wire mesh and funnel including re-connection of earth wire/strip with panel/transformer using GI nut, bolts & washer complete all as specified & directed

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire of 4 mm dia as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete all as specified and as directed .

Material and labour for sub main wiring with 06 Sqmm nominal cross sectional area, two SC, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sqmm nominal cross sectional area, and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed. Note:- 2 Run of 06sqmm + 1 Run of 04sqmm +1Run of PVC conduit shall be measured as 1 RM.

Material and labour for sub main wiring with 04 Sqmm nominal cross sectional area, two SC, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 2.5 Sqmm nominal cross sectional area, and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete all as specified & directed. Note:- 2 Run of 04sqmm + 1 Run of 2.5sqmm +1Run of PVC conduit shall be measured as 1 RM.

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 240 volts of 20 Amps, 'C' curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed.

Supply and fixing in repair sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

Supply and fixing in repair sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

Supply and fixing in repair sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 04 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified directed.

Supply and fixing in repair sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following:- (a) MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volts of 06 to 32 Amps, "C" curve, 10 KA breaking capacity - 12 Nos.

Supply and fixing in repair MCB, SP, AC, 240 volts of 06 to 32 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed. Make :- Legrand, Cat No. 4085 87 to 4085 95 or equivalent in Hager, Cat No : NCN106N to NCN132N or Schneider, Cat No : A9N1P06C to A9N1P32C.

Supply and fixing in repair MCB, DP, AC, 240 volts of 40 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing in repair MCB, DP, AC, 240 volts of 63 Amps capacity "C" curve, 10 KA breaking capacity and making connections by using suitable copper lugs complete all as specified & directed.

Supply and fixing Ventilating fan wall mounted type of 250 mm sweep, 240 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed by Engineer - in - charge.

Supply and fixing Ventilating fan wall mounted type of 200 mm sweep, 240 volts, AC, 50 Hz capacity, cutting of hole in wall, making of wooden frome, all arrangements for mounting of fan including making good of disturbed surface etc complete all as directed by Engineer - in - charge.

Supply & fixing in repair MCCB, 250 Amps, 04 pole, AC, 415 Volts of 36 KA breaking capacity complete all as specified & directed. Make :- Legrand, Model : DPX 160, Cat No. 4200 16 or equivalent in Hager, Cat No. HDA126Z or Schneider, Cat No.LV516312

Supply & fixing in repair MCCB, 125 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed. Make :- Legrand, Model : DPX 160, Cat No. 4200 16 or equivalent in Hager, Cat No. HDA126Z or Schneider, Cat No.LV516312

Supply & fixing in repair MCCB, 100 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed. Make :- Legrand, Model : DPX 160, Cat No. 4200 16 or equivalent in Hager, Cat No. HDA126Z or Schneider, Cat No.LV516312

Supply & fixing in repair MCCB, 63 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete all as specified & directed. Make :- Legrand, Model : DPX 160, Cat No. 4200 16 or equivalent in Hager, Cat No. HDA126Z or Schneider, Cat No.LV516312

Supply and fixing or passing through pipe, 10 Sqmm, 2 core, 1100 Volts grade, heavy duty, multi-stranded, PVC insulated, aluminium conductor, served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed service cable for service connections from existing LT Panel/Pole to DB/busbar chamber including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified & directed. Make:- Havells/Finolex/Polycab

Supply and fixing in repair sheet metal enclosure distribution board triple pole and neutral (TPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following:- (a) MCB, 63 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete - 01 No. (b) MCB, SP, AC, 240 volts of 06 to 32 Amps, "C" curve, 10 KA breaking capacity - 12 Nos.

Taking down defective street light fitting any watage from pole/bldg and repair the same including replacement of defective/ faulty LED driver and refexing the same incl connection complete all as directed

Simran construction Company

V r traders

BNL INFRA BUILD CON

Gaurav Construction Company

M/S Blues Developers Pvt. ltd

garnet engineers contractors