REPAIR/ MAINTENANCE OF WOODEN AND STEEL FURNITURE AT AF STN GORAKHPUR.

Amount

TABLE BED SIDE : FD-28, FD- 210, FD- 248, FD-276 Dismantle, take out carefully & replace old components of table bed side. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.Replacement of old existing broken table top of any description with S&F new table top of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed with strong bonded chemical ashesive through hot pressed machine match with table bed side shade. complete all as per drg

Replacement of side of table bed side with S&F new sides with 12 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed with strong bonded chemical ashesive through hot pressed machinematch with table bed side shade.complete all as per drg.

Replacement of shelf & bottom with S&F 12 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with with 2 mm thick PVC edging fixed with strong bonded chemical ashesive through hot pressed machine match with table bed side shade. complete all as per drg.

Replacement of back ply of table bed side with S&F new back ply with 6 mm thick commercial ply wood.

PEG TABLE : FD-25(M), FD-236, FD-277, FD-384 ,3973 OR SIMILAR PATTERN Dismantle, take out carefully & replace old components of peg table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and .Replacement of old existing broken top of peg table of any description with S&F new top of peg table with Top 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical ashesive through hot pressed machine complete all as per drg.

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg. complete all as specified and directed.

TABLE CENTER : FD-29(M), FD-235, FD-274 Dismantle, take out carefully & replace old components of table center. Complete all as shown on drg, specified and directed by the Engineer-in-Charge andReplacement of old existing broken top of table center of any description with S&F new top of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick PVC edging fixed on two sides with strong bonded chemical ashesive through hot pressed machine complete all as per drg.

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

Replacement of stiffener with S&F new teak wood stiffener made to shape.

S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing.

TEAPOY : FD-34(M), FD-232, FD-278, FD-382 Dismantle, take out carefully & replace old components of teapoy. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old existing broken top of teapoy of any description with S&F new top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick PVC edging fixed on two sides with strong bonded chemical ashesive through hot pressed machine complete all as per drg..

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

Replacement of stiffener with S&F new teak wood stiffener made to shape.

S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing

TABLE DRESSING GENTS : FD-31(M), FD-230, FD-379 Dismantle, take out carefully & replace old components of table dressing gents Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old existing broken top of table dressing gents of any description with S&F new top of 12 mm thick prelaminated MDF board exterior grade (Grade I, Type-II) ISI marked with 3 mm thick PVC Edging fixed to two sides with chemical adhesive by hot pressure method.Rest all as specificied and directed by Engineer-in-charge/GE.

Replacement of side with S&F new side of 12mm thick MDF board exterior grade (Grade I, Type-II) ISI marked with 3 mm thick PVC Edging fixed to two sides with chemical adhesive by hot pressure method.Rest all as specificied and directed by Engineer-in-charge/GE.

Replacement of bottom with S&F new 12mm thick ply, teak veneered on one side and commercial on other side grade I (BWR Resin) made to shape fixed in position.

Replacement of drawer with S&F new drawer made to shape fixed in position.

Replacement of back frame with S&F new back frame with 6mm thick commercial ply grade I BWR grade made to shape fixed in position.

Replacement of knob with S&F new fancy knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality.

Replacement of mirror with S&F new mirror Make-Modi guard,Atul of size 380mm x 760mm x 5.5mm thick made to shape fixed in position all as shown on drg, specified and directed by the Engineer-in-Charge

TABLE DRESSING LADIES WITH MIRROR : FD-32, FD-251 Dismantle, take out carefully & replace old components of table dressing ladies. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of knob with S&F new fancy knob 25mm dia, 24mm length as approved by GE/Engineer-in-Charge of best quality.

Replacement of legs of table dressing ladies with S&F new legs of Ist class HW(MP teak wood).with shoe as per drg.

M & L for replacement of U/S 6mm thick back ply BWP grade as per drg.

M & L for replacement of U/S stiffener between legs.

Replacement of broken top of table dressing ladies of any description with S&F new top table dressing ladies of 18 mm thick pre-laminated MDF board exterior grade,(Grade-I,Type-II) ISI marked with 3mm thick PVC edging fixed to two sides with chemical adhesive by hot pressure method.Rest as specified in drg and directed by Engineer-in-charge/GE

Replacement of side of table dressing ladies with S&F new side of table dressing ladies with 18 mm thick Pre laminated MDF board exterior grade(Grade-I,Type-II) ISI Marked.

Replacement of bottom of table dressing ladies with S&F new bottom of table dressing ladies with 18mm thick Pre laminated MDF Board exterior grade(Grade-I,Type-II) ISI Marked.

Replacement of drawer of table dressing ladies with S&F new drawer as per Drg

Replacement of side long rail jointed to leg of table dressing ladies with S&F new side long rail jointed to leg of Ist class HW (MP teak wood) .

Replacement of short rail of table dressing ladies with S&F new short rail of Ist class HW (MP teak wood).

Replacement of back of table dressing ladies with S&F new back of table dressing ladies with teak wood veneered one side & commercial on other side.

Removing old broken/ U/S sliding glass from table dressing ladies and S & F new 5.5mm thick sheet glass with plastic handle as per sample, shape and size shown in drawing complete all as specified and directed.

Removing of old U/S looking mirror from table dressing ladies and S & F new looking mirror of size 1220 x 366 x 5.5mm thick,Make-Modi guard,Autul, made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge

TABLE DINING FOR 6/4 PERSONS : FD/MAP-II/03 ,FD-273,376 Dismantle, take out carefully & replace old components of table dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old existing broken top of table dining 6 persons of any description with S&F new top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick PVC edging fixed on two sides with strong bonded chemical ashesive through hot pressed machine complete all as per drg.

All as per Srl item No. 42 here-in-before but top of table dining 4 persons.

L-Shape wooden corner of size 4" x 4" x 1" to the Table between legs and rail to be fixed with screw.

Replacement of leg with S&F new teak wood leg made to shape

Replacement of long rail of table dining 6 Persons with S&F new teak wood long rails made to shape

Replacement of long rail of table dining 4 Persons with S&F new teak wood long rails made to shape

Replacement of short rails with new teak wood short rails made to shape

S & F new Nylon Buffer of superior quality with suitable screws for fixing.

TABLE DINING 6/8 PERSONS : FD-30, FD-239, FD-273, FD-376, FD-1115 Dismantle, take out carefully & replace old components of table dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old existing broken top of table dining 8 persons of any description with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick PVC edging fixed on two sides with strong bonded chemical ashesive through hot pressed machine complete all as per drg.

Replacement of leg with S&F new teak wood leg made to shape

Replacement of long rail with S&F new teak wood long rails made to shape of table 8 person

Replacement of short rails with new teak wood short rails made to shape

Replacement of stiffener with S&F new teak wood stiffener under the top joining the top long side of top rails of table dining.

Provn of new angular bracket 08 nos with steel screws suitable size of Ist class HW (teakwood) of size 125 x 100 mm x 25 mm complete as approved and all as shown on drg.

S & F new hard PVC/ rubber shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

TABLE 900 MM X 600 MM OR (3' x 2') (WOODEN) W/O DRAWER : FD-42, FD-55, FD-223, FD-231, FD-284 Dismantle, take out carefully & replace old components of table 3'x2'. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old existing broken top of table 3 x 2 of any description with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick PVC edging fixed on two sides with strong bonded chemical ashesive through hot pressed machine complete all as per drg.

Replacement of legs of table S&F new leg made out of Ist class HW (teak wood)

Replacement of table frame's long rail with S&F new table frame's long rail made out of Ist class HW (teak wood).

Replacement of table frame's short rail with S&F new table frame's short rail made out of Ist class hard wood (teak wood).

S & F new Stiffener.

Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size.

Replacement rectangutar braket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm.

TABLE 900 MM X 600 MM WITH DRAWER (3' x 2') (WOODEN) : FD-41, FD-224, FD-283 Dismantle, take out carefully & replace old components of table 3'x2'. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old existing broken table top of Table of any description & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 4 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all per drg.

Replacement of legs of table S&F new leg made out of Ist class hard wood (teak wood)

Replacement of table frame's long rail with S&F new table frame's long rail made out of Ist class hard wood (teak wood).

Replacement of table frame's short rail with S&F new table frame's short rail made out of Ist class hard wood (teak wood).

Replacement of U/S drawer with new drawer of same size and shape to Table. Front of the drawer shall be made out of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade with 3mm PVC edging fixed to two sides base and back of drawer made of 12mm thick ply wood (ISI Marked) and fixing all as shown in drg.Rest as specified in drg and directed by Engineer-in-charge/GE and including aluminium anodized knob and fixing all as per shown in drg

S & F new Stiffener.

Replacement rectangutar braket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm.

Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size.

CHAIR DINING (JCO/ORS) : FD/MAP-II/05 ,FD-228/279/16/250 Dismantle, take out carefully & replace old components of chair dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old U/S front leg from existing Chair dining and S & F same size new front leg made out of Ist class hard wood teak to chair dining.

All as per srl item No. 72 here-in-before but rear leg of chair dining.

All as per srl item No. 72 here-in-before but front/ back/ side rail of chair dining.

All as per srl item No. 72 here-in-before but back rest (i.e. horizontal wooden members for back rest of size 45mm x 35mm ) of chair dining.

All as per srl item No. 72 here-in-before but stiffener between front leg to rear leg of chair dining.

All as per srl item No. 72 here-in-before but stiffener for jointing to side stiffener of chair dining.

Removing of old U/S/broken PVC seat from chair dining and S & F new PVC seat 4mm thick in single piece all as per shape and size shown on drg and as directed.

S & F new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

M&L for recaning of chair dining in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3 mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed by the Engr -in-charge.

BED PLYWOOD TOP FD-246/247 OR SIMILAR PATTERN: Removing unsv plywood top and S&F new ply wood top made of 12mm thick BWP Grade approved by GE/Engineer -in-charge ,complete all as per drawing

Replacement of ply wood on both side head rest frame with S&F new 3.5 mm thick ply wood one side teak vennered and other side commercial grade-I (with BWR Resin) and including teak wood beading plain for head rest alround and half cut round beading fornt side and other side complete as per drg,beading made to shape fixed in position complete all as shown o drg, specified and directed by Engineer-in-charge.

Replacement of leg of head rest with S& F new Ist Class HW(Teak wood) leg made to shape fixed in position complete all shown on drawing specified and directed .

Replacement of ply wood 3.5 mm thick,one side teak, and plain beading and half cut round beading of foot rest with S&F new ply wood of foot rest fixing in position complete all as shown on drg,specified and directed.

Replacement of leg of foot rest with S& F new Ist Class HW(Teak wood) leg made to shape fixed in position complete all shown on drawing specified and directed .

Replacement of long rail with S& F new Ist Class HW(Teak wood) leg made to shape fixed in position complete all shown on drawing specified and directed .

Replacement of short rail with S& F new Ist Class HW(Teak wood) rail made to shape fixed in position complete all shown on drawing specified and directed .

Replacement of stiffner with S& F new Ist Class HW(Teak wood) stiffner made to shape fixed in position complete all shown on drawing specified and directed .

Replacement of mild steel bracket with S&F new bracket made out of 40mm x40mmx6mm flat iron ,made to shape fixed in position complete all as shown on drg specified and directed.

CHAIR DINING OFFRS FD-FD/MAP/-II/04, FD-E6/MAP-10: Replacement of old U/S front leg from existing Chair dining and S & F same size new front leg made out of Ist class hard wood teak to chair dining.

All as per item above but Rear leg as per drg

All as per item above but Seating frame members front,back sides as per drg

All as per item above but Bottom /centre stiffner as per drg

All as per item above but Back strip as per drg

S & F in repairs new Nylon Buffer of superior quality with suitable screws for fixing complete all as shown on drg, specified and directed.

Replacement of unserviceable plywood for seat/back with new 12 mm thick plywood BWP grade ISI Marked and fixing PU Foam cushion with 50 MM thick denisity Make-Sleep well, Kurl-on y with tapesry cloth as approved by Engr-in-charge /GE of rate not less than 450 /RM complete as per drg and as directed by Engr-in-charge.

SIDE BOARD FD-26/241 Removing unserviceable front door and s&f new front door made with 18 mm thick prelaminated MDF Board 0.6 mm thick laminate in colour shade exeterior grade(Grade-I,Type-II) with piano type hinges and Fancy CP Knob approved by Engineer -in-charge with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete all as per drg.

Removing unserviceable back ply of side board and S&F new back ply wood 6mm thick BWP grade of required size complete all as specified and directed by Engr-in-charge.

Removing unserviceable both side MDF board and S&F new MDF board 18 mm thick exeterior grade-I ,Type -II ISI Marked with 0.6 mm thick laminate in colour shade as approved by EIC/GE with 3mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete all as per drg.

Removing unserviceable top and S&F new top made out of 18 mm thick MDF Board exterior grade 0.6 mm thick laminate in colour shade with 3 mm PVC high gloss edge binding tap e fixed with suitable adhesive match with table bedside colour. Complete all as specified and directed by Engineer-in -charge with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete all as per drg.

Removing unserviceable bottom portion and S&F new bottom portion made out of 18 mm thick MDF Board 0.6 mm thick laminate in colour shade with 2 mm PVC high gloss edge binding tape fixed with suitable adhesive match with table bedside colour. Complete all as specified and directed by Engineer-in -charge

Removing unsv Leg of table bed side and S&F new teak wood leg made to shape

Removing unsv Long stiffner and S&F new teak wood long stiffnerl made to shape.

Removing unsv short stiffner and S&F new teak wood short stiffner made to shape.

Readjustment of drawers making suitable arrangements by providing telescopic chanel (set of two) for smooth functioning I each drawer including CP handle as per sample

Replacement of piano type hinges with S&F new piano type hinges light weight

Removing unsv Drawer& S&F new drawer made of 18mm thick prelaminated MDF board exetrior grade of shade as approved by Engineer-in charge/GE and complete all as per drg.

SOFA SET 4/5 SEATER DRG NO FD-281/373 Taking out U/S rear legs and provn of new rear legs made of 1st class HW for sofa single three seater

Taking out U/S front legs and provn of new front legs made of 1st class HW for sofa single three seater.

Taking out U/S short rail and provn of new short rail made of 1st class HW for sofa single three seater

Taking out U/S long rail and provn of new long rail made of 1st class HW for sofa single three seater.

Taking out U/S Seat frame and provnn of new seat frame made of 1st class HW including the horizontal wooden battens duly fixed with 12 mm thick plywood BWR for sofa three seater.

Taking out U/S Seat frame and provnn of new seat frame made of 1st class HW including the horizontal wooden battens duly fixed with 12 mm thick plywood BWR for sofa single seater.

Taking out U/S back frame and provnn of new back frame made of 1st class HW including the horizontal wooden battens duly fixed with 12 mm thick plywood BWR for sofa single seater.

Taking out U/S arm and provn of new arm made of 1st class HW.

Taking out U/S back frame and provnn of new back frame made of 1st class HW including the horizontal wooden battens duly fixed with 12 mm thick plywood BWR for sofa three seater.

Cushion complete as per shape and size ref in drg with 40 denisity PU Foam of size 22''x21''x100/95 mm with upholstery of tapestry cloth of range not less than Rs 450 per meter (Make as per sample) colour/shade and quality and providing a chain of best quality (at either of 21" side) of make YKK with two runners at both ends as approved by Engr-in-charge.

CHAIR WRITING FD-20/202/250/280 Removing unserviceable rear leg and S&F new rear leg made of 1st class HW teak wood made to shape fixed in position as per drg

Removing unserviceable front leg and S&F new front leg made of 1st class HW teak wood made to shape fixed in position as per drg

Replacement of side rail with S&F new side rail made out of made out of 1st class HW teak wood made to shape fixed in positon as per drg.

Removing unserviceable Seating frame members front/back sides and S&F new seating frame members front/back sides made of teak wood as per drg.

Removing unserviceable bottom /centre stiffner and S&F new bottom/Center stiffner made of teak wood as per drg.

Removing unserviceable Arm rest and S&F new arm rest made of teak wood as per drg.

Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size.

Removing unserviceable back strip and S&F new back strip made of teak wood as per drg.

M&L for recaning of chair writing in Godrej pattern with oval shape 2 mm wide new white plastic cane and 3 mm wide at the edge make as approved by GE including taking out old canning complete all as shown on drawing and as directed by the Engr -in-charge.

TABLE CENTER TWO TIER FD-29(M), FD-235,FD-236, FD-274 Dismantle, take out carefully & replace old components of table center. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old existing broken top of table center of any description with S&F new top of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical ashesive through hot pressed machine complete all as per drg.

Replacement of leg with S&F new teak wood leg made to shape.

Replacement of long rail with S&F new teak wood long rails made to shape.

Replacement of short rails with S&F new teak wood short rails made to shape.

Replacement of old existing broken bottom of table center of any description with S&F new bottom of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical ashesive through hot pressed machine complete all as per drg.

Replacement of stiffener with S&F new teak wood stiffener made to shape.

S & F new hard PVC/rubber shoe/ ring of superior quality with suitable screws for fixing.

TABLE DINING 900X900 : FD-273,376 Dismantle, take out carefully & replace old components of table dining. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old existing broken top of table dining 3X3 of any description with S&F new top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical ashesive through hot pressed machine complete all as per drg.

L-Shape wooden corner of size 4" x 4" x 1" to the Table between legs and rail to be fixed with screw.

Replacement of leg with S&F new teak wood leg made to shape

Replacement of long rail of table dining 3x3 with S&F new teak wood long rails made to shape

Replacement of short rails with new teak wood short rails made to shape

S & F new Nylon Buffer of superior quality with suitable screws for fixing.

TABLE WRITING FD-275/249 Dismantle, take out carefully & replace old components of table writing. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old existing broken table top of Table wriing of any description & replacement of the same with S&F new table top of 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete rest all per drg.

Replacement of legs of table writing S&F new leg made out of Ist class hard wood (teak wood)

Replacement of table writing frame's long rail with S&F new table frame's long rail made out of Ist class hard wood (teak wood).

Replacement of table writing frame's short rail with S&F new table frame's short rail made out of Ist class hard wood (teak wood).

S&F side of cabinet with 18 mm thick pre laminated MDF board exterior grade of shade as approved by Engr-in-charge/GE rest all as per drg.

Back ply 6mm BWP Grade as per drg.

Drawer made of 18mm thick prelaminated MDF board exetrior grade of shade as approved by Engineer-in charge /GE with 2 mm thick PVC edging in front sides shall be of 1st class teak wood and bottom of drawer shall be 9 mm thick BWP plywood along with CP Knob complete all as per drg.

Cabinet door made of 18 mm thick prelaminated MDF Board exterior grade of shade as approved by Engineer-in-charge /GE with drawer along with locking arrangement and CP handles as per smple complete all as per drg and directed by Engineer-in-charge.

S & F in repairs new Stiffener.

Replacement of rectangutar braket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 100 mm x 100 mm x 25mm.

Replacement of rubber shoe with screw (steel) with S&F new Nylon Buffer of superior quality screws (steel) of suitable size.

M&L for melamine polish with spray machine after removing of existing polish of any description by scrapping and smothening of surface wherever required or as directed by Engr-in-charge to the following furniture articles all are of MES pattern viz F/DB/FD/MAP series or similar items including applying wax for depressed surface as well as washing with caustic soda wherever required before polishing all as specifiedand as directed by Engr-in-charge. Polish shall be carried out after making the article intact by tightening all parts and carrying out ante-termite and ante bug treatment.(ii) Work will be executed where the furniture exist in different user units at OTM/MD accns under the jurisdiction of GE Including BSO's furniture yard as directed by Engr-in-charge.(a) Bed plywood top

Chair dining cushion

Chair dining CB/Map

Chair writing

Chair easy

Table peg

Teapoy

Side board

Table dining 6 pers

Table dining 8 pers

Sofa 3 seater

Sofa single seater

Table dressing Gents

Table dressing ladies

Table centre two tier

Table centre

Table 3x3

Table 3x2 w/o drawer

Table 3x2 with drawer

Almirah large/med/small

Table office clerk

Table office officer

Book case

Bin soil linen

Table writing

Hat stand with mirror

Table bed side/Table bed side map

TABLE COMPUTER : FD/E6/MAP/03 /-S & F following components of table computer including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge and Replacement of old existing broken table top of any description with S&F new table top of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC Edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete complete all as per drawing.

Removing of old UNSV bottom shelf of table computer and S&F new but bottom shelf of Table computer as per drg.

Removing of U/S vertical board of both side of Table computer and S&F new verticle board of both side of table computer as per drg

Removing U/S keyboard tray of Table computer and S&F new key board tray as per drg.

Removing old U/S drawer of Table computer and S&F new drawer of table of Table computer.

Pull out old U/S mouse tray of Table computer and S&F new mouse tray of table computer as per drg.

Removing of old U/S telescopic channel of key board and S & F new stainless steel telescopic channel to Table computer.

S&F new fancy knobs to Table computer.

S&F new handles to Table computer.

S&F new Nylon buffers to Table computer.

Welding work wherever required as directed by EIC and GE.

TEAPOY VARANDHA : FD-35(M), FD-208, FD-255, FD-383 S & F following components of Teapoy Verandah including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Replacement of old existing broken table top of any description with S&F new table top of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC Edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete complete all as per drawing.

S & F new 25mmx3mm flat iron on top of legs of length 800mm welded to existing flat iron at top placed in position as shown in drg.

Replacement of legs of table with S & F new legs.

S&F PVC hard rubber shoes of best quality for Tea poy Verandha.

Welding work wherever required as directed by EIC and GE.

BED PLY TOP STEEL : FD/E6/MAP/08 (R) S & F following components of bed including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. S & F in repairs new 12mm thick commercial BWR ply placed in position fitted with 30/35mm long nut bolts and washers as shown in drg,

S & F new 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE placed in position for headrest duly fitted with screws as shown in drg.

S & F new 18 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE placed in position for footrest duly fitted with screws as shown in drg.

High Quality rubber shoes with inside MS washer at bottom 40mm high of size 38mmx38mm.

Welding work wherever required as directed by EIC.

CHARPOY IP HARD TOP : FD/MAP-II/01 S & F following components of charpoy including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. S & F new 12mm thick commercial BWR Plywood of size 1916mm x 836mm fixed with nut and bolt (10 Nos). All as shown on drgs.

Replacement of Long rails with S & F New Long rails of size 1980mm x 65mm x 25mm rectungular of 16 Gauge MS pipe

Replacement of short rails with S & F New short rails of size 900mm x 65mm x 25mm rectungular of 16 Gauge MS pipe

Replacement of leg with S & F New leg of size 440mm x 32mm x 32mm rectangular of 16 Gauge MS pipe

Replacement of Stiffner with S & F New Stiffner of size 836mm x 25mm x 25mm square of 16 Gauge MS pipe

Replacement of center Stiffner with S & F New center Stiffner of size 836mm x 25mm x 25mm square16 Gauge MS pipe

MS Clips for fixing of plywood size 60mm x 25mm x6mm thick and welded with frame of charpoy. All as shown on drgs.

Removing old UNSV 32mmx32mm rubber shoes from the legs of charpoy, S & F new 32mmx32mm rubber shoes to the legs of charpoy

Welding work wherever required as directed by EIC

STEEL TABLE OFFICERS/CLERK OF SORTS : FD-84(M), FD-381, FD-1002, FD-1003, FD-1004 S & F following components of table including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Replacement of old existing broken officers table top of any description with S&F new table top of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine coplete all as per drawing4 mm thick teakwood beading.

All as per item here in above but top of table clerk.

Replacement of drawer with S&F new table drawer made to shape, fixed in position all as shown on drg, specified and directed with Locking arrangement i.e. Key holes etc.

Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks with double key fix with suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Leg (New leg must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg)

Stiffener (New stiffener must be made of 25mm MS square pipe,16 gauge all as specified and shown on drg)

Replacement of standard PVC Handle with S&F new PVC handle.

Welding work wherever required as directed by EIC

Replacement of rubber shoe with S&F new hard rubber shoe of superior quality.

STEEL LOCKER OF SORTS : FD-127(M), FD-257, FD-1029, CWE/ BPL/53 S & F following components of locker including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Replacement of Handle with S&F new Chromium plated handle complete with nuts and pins

Replacement of legs with S&F new legs complete all as shown on drg, specified and directed.

Replacement of shelf with S & F New shelf complete all as shown on drg, specified and directed .

Replacement with S&F new C.P. conduit pipe 20 mm dia for locker steel or sorts complete all as shown on drg, specified and directed .

Chromium plated safety type hasp & staples

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Replacement of hinges of steel locker with S&F new hinges complete all as shown on drg, specified and directed.

Welding work wherever required as directed by EIC

ALMIRAH STEEL LARGE 1/2 HANGING 1/2 SHELVING : FD-114(M), FD-1033, FD/E6/MAP/18 S & F following components of almirah including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah large

Replacement of shelf of almirah with S&F new shelf made out of 1.00 mm thick MS sheet complete fitting with nut & washer all as shown on drg, specified and directed .

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Replacement of Handle with S&F new Chromium plated handle complete with nuts and pins

Replacement of legs of steel almirah large with S&F new leg.

Replacement of hinges of steel almirah large with S&F new hinges complete all as shown on drg, specified and directed.

Welding work wherever required as directed by EIC

CP Conduit pipe as per drg

STEEL ALMIRAH LARGE : FD-67(M), FD-351, FD-1031 S & F following components of almirah including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Replacement of Handle with S&F new Chromium plated handle complete with nuts and pins

Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah large

Replacement of legs of steel almirah large with S&F new legs complete all as shown on drg, specified and directed.

Replacement of shelf of steel almirah large with S&F new shelf complete all as shown on drg, specified and directed .

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Replacement of hinges of steel almirah large with S&F new hinges complete all as shown on drg, specified and directed.

Welding work wherever required as directed by EIC

STEEL ALMIRAH MED : FD-243 S & F following components of almirah including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed.

Replacement of Handle with S&F new Chromium plated handle complete with nuts and pins

Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah medium.

Replacement of legs of steel almirah medium with S&F new legs complete all as shown on drg, specified and directed.

Replacement of shelf of steel almirah medium with S&F new shelf complete all as shown on drg, specified and directed .

Door Shutter (New shutters must be made of 1mm thick MS sheet, made to shape and size)

Cleats ( New cleats must be made of 2mm thick MS sheet)

Welding work wherever required as directed by EIC

CHAIR WRITING MAP : FD/E6/MAP/12 /TP S & F following components of chair writing including dismantling taking out carefully & replace old components of chair writing. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Removing U/S damaged Seat & back of Chair writing. S & F new seat & back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

Removing old U/S arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed.

Taking out U/S /broken frame and S&F new frame as per drg duly painted as per drg and as directed by EIC.

Welding work wherever required as directed by EIC

Removing the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair.

CHAIR VERANDAH:- FD-19, FD-256, FD-359, FD/MAP-II/06 S & F following components of chair including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Removing the existing U/S cane/niwar plastic from the seat and back of chair and recanning the seat and back of chair with plastic cane 3.5mm to 4mm wide of 1st quality, white colour in pure godrej pattern. The canning of chairs shall only be carried out after complete painting process as specified in drg. MAKE OF CANE- SHAH, PREMIER

Removing the existing U/S/broken PVC seat and back from the chair verandah MAP(JCO/ORs), S & F new PVC seat and back 4mm thick to the chair verandah MAP (JCO/ORs) after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/ COMFO/ HARMONY

Replacement of legs of chair with S&F new legs made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed.

Welding work wherever required as directed by EIC

Removing the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair.

TABLE COMPUTER : TP S & F following components of table computer including dismantling taking out carefully & replace old components of table. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Replacement of old existing broken table top of any description with S&F new table top of 18/19 mm thick MDF board exterior grade (Grade I, Type-II) ISI marked duly post -formed with 0.6 mm thick laminate in colour/shade as approved by EIC/GE with 2 mm thick PVC Edging fixed on two sides with strong bonded chemical adhesive through hot pressed machine complete all as per drawing.

Removing of U/S vertical board of both side of Table computer and S&F new verticle board of both side of table computer as per drg

Removing U/S keyboard tray of Table computer and S&F new key board tray as per drg.

Removing old U/S drawer of Table computer and S&F new drawer of table of Table computer.

Removing of old U/S telescopic channel of key board and S & F new stainless steel telescopic channel to Table computer.

Removing old U/S twin wheel castors and S&F new wheel castors.

CHAIR COMPUTER/ REVOLVING / EXECUTIVE CHAIR DRG NO FD/E6/MAP/01 AND TP OR SIMILAR PATTERN S & F following components Chair computer/revolving/executive HB/LB/MB including dismantling taking out carefully & replace old components of chair. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. S&F new seat made of 12 mm thick hot pressed plywood with fabiric/polyproplene/acrelic/fabric upholstery/leatherette as required (range of fabrics and letherette material not less than 350/RM) and moulded polyurethene foam 40 density with pvc lipping all around complete all as shown on drwing as required as directed by Engineer -in-charge

S&F new back seat made of 12 mm thick hot pressed plywood with fabiric/polyproplene/acrelic/fabric upholstery/leatherette as required (range of fabrics and letherette material not less than 350/RM) and moulded polyurethene foam 40 density with pvc lipping all around complete all as shown on drwing as required as directed by Engineer -in-charge

Pu arms/paded arms/Polyurethane arms as required complete all as per drg as directed by Engineer-in-Charge.

S&F new metal push back assy as required and directed by Engineer-in-charge.

S&F new steel base with twin casters as required and directed by Engineeer-in-charge.

S&F Heavy duty nylon chair base with twin caster wheel as required and directed by Engineer-in-charge

S&F new chrome free cylinder tube including fixing comple as required and directed by Engineer -in charge

S&F new twin heavy duty wheel castors of required dia complete all as directed by Engineer-in -charge

CHARPOY GI PIPE FD-220 S & F following components of charpoy including dismantling taking out carefully & replace old components. Complete all as shown on drg, specified and directed by the Engineer-in-Charge.Ply wood top of 12 thick BWP Grade plywood as per existing shape and size with 10 Nos sunken nuts and bolts ,12 mm x 6 mm thcik 1 st class teak wood beading half round along with the edges of the plywood and rounded at corners,fixed with fevicol and headless nails including drilling holes of appropriate size with electiric dril machine complete as per drg and as directed.

S&F in replacement stiffner made of 25 mm mild steel suare tube 80 cm long not less than 16 guage in thickness each,welded to GI Charpoy pipe complete all as specified and directed.

S&F in replacement ,long rail made of 32mm dia medium grade GI pipe ISI Marked all as specified and shown on drg complete all as specified and directed.

Replacment of unserviceable short rail of charpoy GI Pipe fabricated from old pipe obtained in replacement of long rail from SI items No 276 above including cutting threding etc as required and directed.

Replacement of unserviceable legs of charpoy GI pipe fabricated from old pipe obtained in replacement of short rail from SI items No 277 above including cutting threading etc as required wit bottom plug made of sal wood and flat iron clmap 02 Nos for MNF Set duly painted with two coats of black paint complet all as specified and directed

S&F in replacement GI 3 way elbow 32mm dia complete all as specified and directed

S&F in replacement of 32mm checknut compelte all as specified and directed

CHAIR WRITING PAD WITH ARM TP : S & F following components of chair writing pad with arm including dismantling taking out carefully & replace old components. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. Removing unserviceable PVC back and S&F new back PVC complete all as specified and directed.Colour of the backk seat should be approved by GE and Engineer-in-charge

Removing unserviceable seat complete with foam and S&F new PU foam cushion with 50mm thick denisity make-Sleepwell,Kurl-on with tapestry cloth rate cloth should not be less than 450 R/M.Foam and cloth should be approved by GE and Engineer-in -charge.

Removing unserviceable PVC arm and S&F new PVC Arm as per requiement of Chiar complete all as specified and directed by GE and Engineer-in -charge.

Removing unserviceable PVC writing board and S&F new PVC writing board high bearing capacity as per requiement of Chiar complete all as specified and directed by GE and Engineer-in -charge.

Removing unserviceable rotary parts from chair writing board and S&F new aluminium(smooth rotation design) rotary part as required of Chiar complete all as specified and directed by GE and Engineer-in -charge.

Welding work wherever required as directed by EIC and GE.

Replacement of rubber shoe with S&F new hard rubber shoe of superior quality.

PAINTING :(a) M&L for preparing old painted internal /external surfaces of following steel furniture articles of MES pattern including newly replaced parts(if any) by removing peeled off paint,dirt,dust,dents etc ,applying paint putty to make good/level the surfaces including applying a coat of red oxide primer and applying two coats of synthetic enamel paint of shade as approved by Engineer-in-charge /GE with the help of spray machine all as specified and directed by Engineer-in-charge. (b) The work will be executed where the furniture exist in different user units/Md accns under GE(AF)Gorakhpur including BSO'S furniture yard as directed by Engineer-in-charge. (a) Table computer FD/E6/MAP/03

Teapoy verandah : Painting to teapoy verandah with one coat of synthetic enamel white paint over a coat of red-oxide primer after cleaning,dusting and scratching the entire metal surface with sand paper,making surface neat and smooth.

Bed ply top steel : FD/E6/MAP/08 ®

Charpoy MS Square hard top :FD/MAP-II/01

Table steel officers FD-84(M),FD-381,FD-1002,FD-1003,1004

Table steel Clerk FD-84(M),FD-381,FD-1002,FD-1003,1004

Almirah steel large FD-67(M),351,1031

Almirah steel med FD-243

Locker bed side steel FD-127(M),257,1029

Almirah steel large 1/2 HANGING 1/2 SHELVING : FD-114(M), FD-1033, FD/E6/MAP/18

Chair verandah:- FD-19, FD-256, FD-359, FD/MAP-II/06 : Painting to chair verandah with one coat of synthetic enamel white paint over a coat of red-oxide primer after cleaning ,dusting and scratching the entire metal surface with sand paper ,making surface neat and smooth.

Table 3x3 FD-1008

Rack steel close type 12' FD-106M

Chair writing steel paded with arm

Book shelf FD-1028,336/ TP

JAISWAL ENTERPRISES

M/s Balaram Bansidhar

JYOT BUILDERS

Shivam Enterprises