COMPREHENSIVE REPAIR FOR DAY TO DAY MAINTENANCE FOR B/R AND E/M COMPLAINTS UNDER AGE B/R-IV AT GE (AWC) MHOW

Amount

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but n. exc 2 sq. m each of any description complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down Shutters of any description n. exc 1 sq. m each of any description complete all as specified and directed.

S&F Pressed steel door frame for single door, size 105 x 60x1mm mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3 mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.

S&F Pressed steel door frame for single door, size 165 x 60x1mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3 mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 , depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb intl the wall complete all as specified and as directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

S & F 35 mm thick second class hardwood rail and style , Plain, framed, panelled shutters Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive with wire mesh gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and as directed.

S&F Solid single PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet reinforced with M.S. tube, edges will be painted to match with prelam sheet suppling & fixing in opening as per specification & drawing including all fixtures shown on drawing.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site complete all as specified and directed.

S&F Alluminium Powder coated powder coated white colour sliding Ventilators made of extruded profiles with wall thickness of 2.3mm +/- 0.2mm. Window profile with hollow section with main chamber frame 88mm X 52mm sliding sash 42mm X 62mm. Sliding mesh sash 42mm X 57mm sliding interlock one vertical length in each shutters 45.50mm X 28mm. Glazing bead 24.50mm X 16mm will be mitred cut and fusion welded at all corneres including external alliminium safety grills of the windowds , railing of holes per fixing hardware and drainage of water of etc. Making arrangement for fixing of hardware EPDM gascade 1.2 +/- 0.2mm thick galvanized steel frame 30mm profile to be inserted in required profile, frame will be fixed to wall with 8mm X 100mm long fastneres. Hardware touch lock of zink alloyed white powder coated. Steel rolleer systerm stainless steel wire cloth of 0.6mm nominal dia of wire and avg width of aperature 1.40mm and required accessories. (Note : The unit rate quoted by the contractor excluded cost of galss and includes all other connected accessories.

S&F Alluminium Powder coated powder coated white colour sliding window three track made of extruded profiles with wall thickness of 2.3mm +/- 0.2mm. Window profile with hollow section with main chamber frame 88mm X 52mm sliding sash 42mm X 62mm. Sliding mesh sash 42mm X 57mm sliding interlock one vertical length in each shutters 45.50mm X 28mm. Glazing bead 24.50mm X 16mm will be mitred cut and fusion welded at all corneres including external alliminium safety grills of the windowds , railing of holes per fixing hardware and drainage of water of etc. Making arrangement for fixing of hardware EPDM gascade 1.2 +/- 0.2mm thick galvanized steel frame 30mm profile to be inserted in required profile, frame will be fixed to wall with 8mm X 100mm long fastneres. Hardware touch lock of zink alloyed white powder coated. Steel rolleer systerm stainless steel wire cloth of 0.6mm nominal dia of wire and avg width of aperature 1.40mm and required accessories.

S&F 150 mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 125 mm size aluminium, anodised barrel tower bolt of extruded section.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F 250 mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.

S&F aluminium anodised barrel tower bolts of extruded section with 200 mm long bolt, all as specified .

S&F120mm size, butt hinges, heady weight, cold rolled mild steel.

S&F100mm size, butt hinges, medium weight, cold rolled mild steel.

S&F 150mm size extruded aluminium alloy handles, fabricated type.

S&F 125mm size extruded aluminium alloy handles, fabricated type.

S&F mild steel 150 mm ordinary rat tail/ Helicle door springs including roller and roller plate complete fixed in repair steel chowkhats a with necessary flat iron cleat by welding or drilling with necessary nut, bolts etc complete all as specified and directed.

S & F brass 2-levers locks for cupboard, grade I of size 50mm complete all as specified and directed.

S & F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished and brass polished complete all as specified and directed.

S&F fanlight magnetic catcher with 14mm catch cast brass and fixed to cupboard shutters all as specified and as directed

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specifed and directed.

Material and labour Preparation old wooden surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint .

S&F in repair Stainless steel curtain rod/rail 25 mm dia medium weight with premium quality incl SS brackets with decorative caps as approved by Engr-in-Charge complete all as specified & directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty and fitted in wooden / steel window in square n exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and as directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, fixed in repairs i.e. Incl removal of old unserviceable wire cloth complete all as specified and as directed.

S&F in repair deco door seal bottom brush dust stopper strip aluminium plate with nylon brush for cover the bottom door gaps between 20-25mm including fixing with steel screws etc; complete all as specified and as directed.

Taking up or down GI tubing 15mm bore and connections from walls and ceiling or laid in floor including cleaning for refixing or removal to store all as directed by Engr-in-Charge

Re-fixing old serviceable steel tubing 15mm bore and supply of new fittings as required at site and fixed in new or old position (walls, ceiling, floors, etc.) all as directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall, ceiling or laid in floor with suitable clamps & nuts etc all as directed.

Taking up or down GI tubing 20mm bore and connections from walls and ceiling or laid in floor including cleaning for refixing or removal to store all as directed.

Re-fixing old serviceable steel tubing 20mm bore and supply of new fittings as required at site and fixed in new or old position (walls, ceiling, floors, etc.) all as directed.

S&F in repair laying and testing for 20 mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed.

S & F of CPVC 20 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed

S & F of CPVC 25 mm outer dia pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and as directed.

S & F of CPVC brass elbow (3/4" X ½") for 20 mm outer dia CPVC pipe complete all as specified and directed.

S & F of CPVC Brass Threaded Adaptor (MTA/ MBTA) (male) for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC Tank Adaptor for 25 mm outer dia pipe complete all as specified and directed.

S & F of CPVC union for 25 mm outer dia pipe complete all as specified and as directed.

S & F of CPVC Ball Valve for 25 mm outer dia pipe complete all as specified and directed.

S&F in repair vitreous china sqatting pan (orissa pattern) size 580mmx440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and as directed.

S & Fixed in repair Vitreous china, (Single piece with flushing cistern) wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc complete all as specified and as directed.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc complete all as specified and as directed.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle , flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and as directed.

S&F in repairs vitreous china,white, wash hand basin, flat back size 550x400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and as directed.

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand &over head Shower screwd down for15 mm GI bore pipe complete all as specified and as directed.

S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for15 mm GI bore pipe complete all as specified and as directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails,D type, 60cm long between flanges,complete all as specified and as directed.

S&F in repairs Health Faucet ABS with Rubbit Cleaning System , 1.25 m Long PVC Flexible Tube & ABS Wall Hook complete all as specified and as directed.

S&F in repair 110 mm dia Cast iron nahani trap with CP grating including including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed

S&F in repair stainless steel kitchen plate rack size 600 x 900 x150 mm of approved pattern made out of stainless steel sheet 0.63 mm thick sheet with round 8mm dia rods including hangine arrangements complete all as specified and as directed.

S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed.

S&F Grating 100 mm dia of CP with or without hole complete all as specified and directed.

S&F in repair 15 mm dia bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.

S&F bib taps Chromium plated brass/ cast copper alloy fancy type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs all as specified and directed.

S&F in repairs PVC bib taps 15mm type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs all as specified and directed.

S&F in repairs PVC stop cock 15mm type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs all as specified and directed.

S&F in repairs PVC Pillar cock 15mm type with capstain head, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs all as specified and directed.

S&F bib taps cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete fixed in repairs i.e., incl taking down and removal of old unserviceable bib cock complete all as specified and directed.

S&F in repair 150 mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed.

S&F, in repair brass concealed spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock ,wall mixer, sink mixer in any size etc (Halfturn size 03) complete all as specified and directed.

S&F in repairs Brass spindle / phase for 15mm dia CP concealed stop cocks etc complete all as specified and directed.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with all plugs, washers, fittings and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed.

S & F in repairs Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in repairs two way Stop/angle cock 15 mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and as directed.

S & F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall complete all as specified and as directed.

S & F in repairs Hand shower 1.5 m CP Flexible SS Tube , 5 flow Hand Shower , adjustable wall hook , rubbit cleaning system all as specified and directed.

S & F in repairs Flexible waste pipe for wash hand basin fittled to Wash Hand Basin incl all necessary brackets etc all as specifed and directed by Engr-in-Charge.

S & F in repairs 32/40 mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc all as specifed and directed by Engr-in-Charge.

S& F in repairs Flush Pipe of polyethylene of low or high density or PVC , 32 mm dia, for low level cistern complete all as specified and as directed.

S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Range premium quality all as specifed and directed by Engr-in-Charge .

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair PVC water tank covers premium quality fitted to tank water tanks of Cap 500 ltrs to 1000 ltr complete all as specified and directed.

S&F in repair 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including removing the existing water tank all as specified in SSR Part I complete all as specified and as directed.

S&F in repair 500ltr capacity rotational moulded polythyiene water storages tanks (cylindrical vartical with closed top) hoisted and fixed in position including removing the existing water tankall as specified in SSR Part-I complete all as specified and as directed.

Disconnecting existing tanks (exc 500 but n. exc 1000 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains . The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes , etc. and hoisting if required reconnecting and re-fixing in the same positiondate of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning.

Disconnecting existing tanks (exc 250 but n. exc 500 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains . The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes , etc. and hoisting if required reconnecting and re-fixing in the same position incl writing the date of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning.

S & F in repairs PVC (SWR) Floor trap/Nahani trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 75mm complete all specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed.

S&F for PVC waste pipe for urinal/WHB with fitting etc 50 mm dia. 60mm long complete all specified and directed.

Dismantling floor , hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles .

M&L for Virified Ceramic tiles 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Description all as per Sl. item no. 94.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Description all as per Sl. item no. 96.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.09 sqm but not exceeding 0.11 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Description all as per Sl. item no. 98.00 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 300 x 200 x 7 mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and as directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/shade) of 300x 450x 7 mm/ 300X 600X 7mm thick in vertical surfaces, as in dado/skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

Attending complaints of leaking / unserviceable pillar cock, Wall mixer, WHB Mixer, bib taps,two way bib taps, stop valves, 15mm - 20mm dia for making it fully functional and leak proof by carefully including taking down, replacing minor unserviceable parts such as rubber washer, leather washers, jumpers brass 15mm - 20mm size complete all as directed and specified. Note: Major parts such as Spindles / phases of CP pillar cocks, wall mixer, WHB mixer,Two way bib taps,CP bib cocks , Angle cocks replaced if any shall be measured and paid for separately under respective items.

Attending complaints of leaking / unserviceable , low level flushing cisterns, PVC or chinaware for making it fully functional and leak proof by replacing the defective parts such as rubber washers,PVC levers, PVC/ CP knobs if required complete all as directed and specified. including GI & UPVC

Attending complaints to welding work in to steel windows, handles,door spring,iron frame of doors,rolling shutter garrages and other iron misc works, putty works, welding (run or spot welding as per site require maint) including replacement of defective items/material alongwith and including welding machine gloves ,welding glass welding rodany other tools required ,as per requirement ,complete all as specified and directed.

Attending to Carpenter work to Joinery ,(wooden/ steel/aluminium)windows /beadings ,doors stoppers,of iron alumunium mongery , pelmet box ,door spring ,rolling shutter etc requring carpenter work and carrying out minor repair such as tighting of screw nails ,wire of false celling ,easening of joinery,door spring ,wooden beadings,MS items ,warnishing etc including replacement of glass panes,wire cloth to joinery or any defective items /materials complete all as specified and directed.

Attending complaints of mason/cement related works, Gratings, tile joint fiiling,minor plastering in wallas,celling ,groove filling, crack filling,doors cills ,windows repairs, chajja repairs,roof joint filling and leakage and seepage in roof and walls,white cement works complete all as specified and diredcted by Engr-in-charge

Note for serial item No 102 to 106:- (a) Each slip shall be constitute 6 Nos of complaints only. if nature of complaints are more than 06 in Nos a separate complaints slip will be generated and paid and considered for payment. (b) If any major part required to be changed then the same shall be measured and paid separatley under respective items.

Attending of complaints for checking of existing electrical items/points for serviceability for continuous of electric supply, rectifying the no light complaints including carrying out repairs/replacement etc as required to make the item/circuit functional and replacement of small pieces of wire, screw, refixing of hanging wires and electrical boards with accessories etc all as specified and directed. NOTE:- (i) Any other replacement of major items shall be measured & paid seperately under respective items of this schedule as supply only. (ii) Each complaint slip restricted to 06 nos of complaint for each area and for complaint above 06 nos complaint for each area will be given separate complaint slip. (iii) Necessary item required for note to complaint at complaint cell i.e complaint register and complaint slip will be provided by contractor without any extra cost as per format given and as direction given by JE E/M and Engr-in-Charge. (iv) contractor will insure all compaint should be rectify on same working day. (v) In this context ifany issue arises then decisin of GE shall be final and binding.

S&F in repairs modular metal flush box 1 and 2 module complete incl cutting wall, fixing in replacement making good disturbed surfaces with plastering and painting to match with existing surface all as specified and as directed.

Description all as per Sl. item no. 108.00 here in above but of size 3 module.

Description all as per Sl. item no. 108.00 here in above but of size 4 module.

Description all as per Sl. item no. 108.00 here in above but of size 6 module.

Description all as per Sl. item no. 108.00 here in above but of size 8 module.

Description all as per Sl. item no. 108.00 here in above but of size 12 module.

S&F in repairs modular white cover plate with frame 1 and 2 module ISI marked complete all as specified and as directed.

Description all as per Sl. item no. 114.00 here in above but of size 3 module.

Description all as per Sl. item no. 114.00 here in above but of size 4 module.

Description all as per Sl. item no. 114.00 here in above but of size 6 module.

Description all as per Sl. item no. 114.00 here in above but of size 8 module.

Description all as per Sl. item no. 114.00 here in above but of size 12 module.

S&F in repair modular switch 1 way 6A, 1 module, ISI marked complete all as specified and directed.

S&F in repairs modular switch 2 way 6A, 1 module, ISI marked complete all as specified and directed.

S&F in repairs modular socket outlet, 6A - 2/3 pin combined 2 module, ISI marked complete all as specified and directed.

S&F in repair modular switch 1 way 16A, 1 module, ISI marked complete all as specified and directed.

S&F in repair modular socket multipurpose 6/16A, 2 module, ISI marked complete all as specified and directed.

S&F in repair modular bell push one way, 5/6 Amp, 240 V, ISI marked complete all as specified and directed.

S&F in repair modular fan regulator switch type 01 module, ISI marked complete all as specified and directed.

Description all as per Sl. item no. 126.00 here in above but of size 02 module.

S&F in repair blank plate 01 module for switch boards, ISI marked complete all as specified and directed. Note for Item No 107 to 128 : Different Model Nos of Approved and required make shall be procured as per site requirement.

S&F in repair switch piano flush type single pole 01 way, 5 Amps, 230 Volts, ISI marked complete all as specified and as directed.

S&F in repair switch bell push flush type single pole 01 way, 5 Amps, 230 Volts, ISI marked complete all as specified and as directed.

S&F in repair switch piano flush type single pole 02 way, 5 Amps, 230 Volts, ISI marked complete all as specified and as directed.

S&F in repair switch piano flush type single pole 01 way, 15 Amps, 230 Volts, ISI marked complete all as specified and as directed.

S&F in repair socket multipurpose 2 in 1, 3 pin, 5 Amps, 230 Volts, ISI marked complete all as specified and as directed.

S&F in repair socket multipurpose 2 in 1, 3 pin, 5 & 15 Amps, 230 Volts, ISI marked complete all as specified and as directed.

S&F in repair switch socket combination multipurpose 2 in 1, 3 pin, 5 Amps, 230 Volts, ISI marked complete all as specified and as directed.

S&F in repair switch socket combination multipurpose 2 in 1, 3 pin, 15 Amps, 230 Volts, ISI marked complete all as specified and as directed.

S&F in repair switch socket combination multipurpose 5 in 1 combined 5 & 15 Amps, 230 Volts, ISI marked with mounting boxes complete all as specified and as directed.

S&F in repair electronic bell ding dong AC 230 volts, ISI marked single pole complete all as specified and as directed.

S&F in repair stepped type electronic fan regulator, flush type single pole, with 5 steps, AC 50 Hz, 230/240 volts grade, ISI marked complete all as specified and directed.

S&F in repair pendent holder bras body with GI holding hook for wall mounted fittings AC 230 volts, 50 Hz, ISI marked complete all as specified and directed.

S&F in repair batten holder AC 230 volts, 50 Hz ,ISI marked complete all as specified and directed.

S&F in repair modular type angle holder AC 230 volts, 50 Hz, ISI marked all as specified and directed.

S&F in repair ceiling rose 3 terminal AC 230 volts, 50 Hz all as specified and directed.

S&F in replacement CFL lamp 36 watt 4 pin type,ISI marked complete all as specified and as directed.

S&F in repair LED lamp 11 watt pin type,ISI marked complete all as specified and directed.

S&F in repair LED lamp 9 watt 5 star rated, pin type, ISI marked complete all as specified and directed.

S&F in repair LED lamp 9 watt 5 star rated, ISI marked complete all as specified and directed.

S&F in repair LED lamp 9 watt 5 star rated,warm white, ISI marked complete all as specified and directed.

S&F in repair LED lamp 9 watt threaded type, warm white, ISI marked complete all as specified and directed.

S&F in repair LED lamp 18 watt, ISI marked complete all as specified and directed.

S&F in repairs electronic driver for 2' x 2' ceiling fitting 36 watts/43 watts, 230 Volts, ISI marked complete all as specified and as directed.

S&F in repair electronic driver suitable for 1x20 watts LED 4 feet fittings ,230 Volts, 50 Hz ,ISI marked complete all as specified and directed.

S&F in repairs 20 W LED batten 4 feet long, wall mounted, with integrated electronic driver, ISI marked complete all as specified and directed.

S&F in repairs 10 W LED batten 2 feet long, wall mounted, extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver with system efficiency 110 lumen/watt, ISI marked complete all as specified and directed.

S&F in repairs angle holder modular type with cord grip cap, ISI marked complete all as specified and directed.

S&F in repairs MCCB 3 pole 100 Amps breaking capacity 25 KA, Ics = 100% Icu, ISI marked including spreader link & taking down and of the same make as item no. 122, complete all as specified and directed.

S&F in repairs MCCB 3 pole 160 Amps breaking capacity 25 KA, Ics = 100% Icu, ISI marked including spreader link & taking down complete all as specified and directed.

S&F in repairs MCB TP 32 Amps, 10 KA breaking capacity, 'C' curve, ISI marked complete all as specified and directed.

S&F in repairs MCB TP 40 to 63 Amps, 10 KA breaking capacity, 'C' curve, ISI marked ,complete all as specified and directed.

S&F in repairs MCB TPN 32 Amps, 10 KA breaking capacity, 'C' curve, ISI marked complete all as specified and directed.

S&F in repairs MCB TPN 63 Amps, 10 KA breaking capacity, 'C' curve, ISI marked, complete all as specified and directed.

S&F in repairs Isolator 100 Amps current rating - 4 pole, ISI marked complete all as specified and directed.

S&F in repairs MCB SPN 32 Amps, 10 KA breaking capacity, 'C' curve, ISI marked complete all as specified and directed.

S&F in repairs MCB SPN 40 to 63 Amps, 10 KA breaking capacity, 'C' curve, ISI marked complete all as specified and directed.

S&F in repairs MCB SP 6 to 32 Amp, 10 kA breaking capacity, 240V 'C' curve, ISI marked complete all as specified and as directed.

S&F in repairs PVC insulated, PVC unsheathed multi stranded heavy duty copper conductor FRLSH cable of size 1.0 sq mm, ISI marked complete all as specified and as directed.

Description all as per Sl. item no.166.00 here in above but of size 1.5 sq mm.

Description all as per Sl. item no. 166.00 here in above but of size 2.5 sq mm.

Description all as per Sl. item no 166.00 here in above but of size 4.0 sq mm.

Description all as per Sl. item no.166.00 here in above but of size 6.0 sq mm.

Description all as per Sl. item no. 166.00 here in above but of size 10.0 sq mm.

S&F in repairs PVC insulated, PVC unsheathed multi stranded heavy duty copper conductor 2 core cable of size 1.5 sq mm, ISI marked complete all as specified and as directed.

Description all as per Sl. item no. 172.00 here in above but of size 2.5 sq mm.

Description all as per Sl. item no. 172.00 here in above but of size 4.0 sq mm.

S&F in repairs PVC insulated, PVC unsheathed multi stranded heavy duty copper conductor 4 core cable of size 1.5 sq mm , ISI marked complete all as specified and as directed.

Description all as per Sl. item no.175.00 here in above but of size 2.5 sq mm.

S&F in repairs PVC insulated, flexible copper cable 23/0.0072, Flexible wire 2 core twisted , 230 volts,ISI marked complete all as specified and as directed.

S&F in repairs fan capacitor of 2.5 MFD for ceiling fan single phase, 230 Volts, ISI marked complete all as specified.

S&F in repairs fan capacitor of 4.0 MFD for exhaust fan single phase, 230 Volts , ISI marked complete all as specified.

S&F in repairs modular surface mounted plastic boxes 3 module for fixing of switch socket combination 16 Amps ISI marked complete all as specified and as directed.

S&F in repairs modular surface mounted plastic boxes 06 module for fixing of switch socket combination 6 Amps (02 Nos) ISI marked complete all as specified and as directed.

S&F in repairs plug top 15 Amps, 230Volt, 50 Hz, ISI marked complete all as specified and as directed.

All as per Sl. item no. 182.00 here in above but of 5 Amps complete all as specified and directed.

S&F in repairs industrial plug and socket 20 Amps, 230 volts, 50Hz, ISI marked complete all as specified and as directed.

Supply only insulation tape 10 mtr length, ISI marked complete all as specified and as directed.

S&F in repairs similar make metal plug and socket DB, double pole 240 volts and including one 20 Amp MCB SPN, C-Curve, ISI marked including taking down complete all as specified and directed.

S&F in replacement of PVC casing n caping where ever necessary of size 20 mm size, ISI marked incl screws, wooden/plastic packing complete all as specified and as directed.

S&F Modular Mini MCB 32 Amps for fixing in Modular plates,ISI marked and of the same/ required complete all as specified and as directed.

M&L for MCB two way center off change over switch 40 Amps, for duel electricity supply management, ISI marked and of the same/required make complete all as specified and directed.

S&F in replacement aluminum lugs of size 35 sq mm complete all as specified and directed.

All as per Sl. item no. 190.00 here in above but of size 50 sq mm complete all as specified and directed.

All as per Sl. item no. 190.00 here in above but of size 70 to 120 sq mm complete all as specified and directed.

S&F in replacement copper lugs of size 6 sq mm complete all as specified and directed.

All as per Sl. item no.193.00 here in above but of size 10 sq mm complete all as specified and directed.

MS SHUBHAM SANTOSH JAIN (BID ID -3290897)

ROHIT ENTERPRISES (BID ID -3285737)