Area development near treatment plants and land scaping in front of RRU building at ACTREC

Amount

Excavation mechanically (using excavators like JCB /Poclain/with bucket) in all types of soil, including murrum, soft rock for foundations, wall, columns, plinth beams, basement, raft, ducts, trenches, underground sumps, septic tanks, soak well including shoring and strutting, bailing out water/pumping off water if required, removing and stacking or Disposing simultaneously the excavated soil anywhere within the ACTREC Campus and/or spreading soils in layers for site development. All complete as per specification and as directed by the Engineer-in charge. upto 2.5 m Depth.

Providing and laying in position ready mixed M20 grade plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, including the cost of centering, scaffolding, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineerin-charge. (M15 grade at all locations)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm (design of mesh as per the instruction of engineer incharge). including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. :Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade. Fixing to post with bolting and welding as per the instruction of Engineer incharge.

Structural Steel work including MS Post and frame for partition, doors and Post: Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer & paint of approved colour, including welding and bolted with special shaped washers etc. complete.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. :25 mm nominal dia Pipes

Providing and fixing brass ball valve with all fixtures as per the instruction of Engineer incharge. - 25mm dia

Providing and laying in position reinforced cement concrete of specified grade including the cost of centering and shuttering - Work at all level : 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) - Pedestals, pit edges, podium and enclosure for landscaping plants.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels Thermo-Mechanically Treated bars of grade Fe-500D or more.

Preparation of Lawn and landscaping for planting on ground: Transporting and disposing of bad soil and debris in to a suitable place out of the centre at this own cost. Filling the excavated areas by red soil (including the cost of red garden soil) for desire level, spreading of red garden soil to the required thickness .All over the area, mixing, rough dressing of area, spreading of 5cm thick layer of manure (including the cost of manure) and mixing properly with soil consolidation with water, fine dressing with preparation of beds by maintaining proper level and slope.

Providing and fixing chain type guard railing with designer metal post at 1 to 2m interval (as per the instruction) with ACTREC embossing on the post. All metal surface to be coated with anti-corrosive material and then enamel painting shall be done of approved colour. The post shall be firmly fixed to the ground with base plate embedded in concrete with concealed fixing of post. The railing shall be welded to the post all complete as per the instruction of Engineer incharge and as per the image provided in the tender.

MS heavy duty openable grill cover fabrication with embossing of "ACTREC" over the drain with primer and painting as per the instruction of Engineer incharge.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality :Rectangular shape 600x450 mm internal dimensions with painting of approved shade as per the instruction of engineer incharge.

CONCRETE BREAKING: Breaking of the existing concrete/brickwork by chiselling at all level including scaffolding and staging and the work shall be carried out so as to cause minimum inconvenience to hospital activity including cost of all material, labour, tools etc. carting away the debris out of hospital premises all complete as specified and directed. Rates also includes core cutting in concrete

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. The ground to be levelled as per the instruction of Engineer incharge.

Supply, laying, testing & commissioning of 1.1 KV AC grade of 4core x 16 sq. mm Aluminium Conductor cable conforming to IS: 1554/Part 1/1998, XLPE, 1100 V class PVC insulated ISI mark armored, bright annealed Aluminium conductor cable in ground at 900 mm back filling & re-instatement, consolidation & removal of excess earth with in a radius of 500 mtr including clamping , saddling , cable route tag , laying of cable tiles / bricks , sand filling through out under ground route. for sports lighting

Supplying & erecting heavy duty flange type brass cable glands for 4C X 16 sq.mm size for end jointing of various sizes for PVC armoured cable with brass washers, rubber rings complete with cable ends & leads connected, with gland double earthing, work completed in all respect all as per instructions

Supplying & erecting crimping type AL lugs confirming to IS suitable for cables up to 16 sq. mm evenly crimped with high pressure tools & connected to switch gear terminals with brass/ cadmium plated nut bolts in an approved manners. all as directed by O-I-C, ES

SITC of 50mm HDPE pipe as per IS 14930 to laid below 700mm depth, back filling and marking the surface good from pole to pole

Exavation of all kind of soil as per required 900 mm below ground level including blasting & chiseling, using compressor, dewatering, back filling, reinstatement, after work completion, if necessary disposal of excess earth within the radius of 500 Mtrs etc. this work also includes making of cable chamber with MS cover at both ends of excavations

3 Mtr. cast iron decorative light pole with 04 decorative arms including 20W LED light fixture 04 nos , suitable for 44 m/sec wind speed with foundation bolts, bakelite with 1 no. 10A SP MCB 04 Nos and stud type terminal block/connector box of approved make suitable for terminating cable up to 4Cx16 sqmm size

SITC of 3 Mtr. hot dip galvanised Octagonal post top type pole having spigot on top of pole, suitable for 44 m/sec wind speed with foundation bolts, bakelite with 1 no. 10A SP MCB and stud type terminal block/connector box 3Ph Neutral cable conection of approved make suitable for terminating cable up to 4Cx16 sqmm size including all fasners and connection accessories and marking of pole.

Supply ,Installation,Testing & Commisioning of M- 20 grade reinforced cementconcrete (RCC) foundation suitable for 3m to 5m high octagonal / conical G.I. pole considering the safe soil bearing capacity at site as 10 T/sq m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template as per design in an approved manner. The scope shall also include grouting of foundation bolts including curing & provision of DWC HDPE pipe for passage the cable and finishing the surface

Supply ,Installation,Testing & Commisioning of 45 Watt LED or equivalent Post top Light having pressure die-cast aluminimum housing with Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint , suitable to following features. - Luminaires suitable with base plate and fitted on a existing site Pole. -In built electronic LED driver, -High Transmisivity diffuser>85%, -IP-65/67, -Warm White -THD<20% -High Efficacy gretaer than or equal to 100 lm/watt, -Provide Uniform low glare lighting , -CRI-70, -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature-4000K , 5000K.

SITC LED Boollar lights / Garden lights flute / Tetris / Tulip with fixing accessories earthings , 12w to 15w square / cylinder bollard steel pole 800mm height including finishing with ground levels. IP 67 outdoor type , with suitable foundation bolts, bakelite and stud type terminal block with connector box for connection of 3 phase neutral cable of 4Cx 2.5 sqmm size Suitable foundation bolt as per foundation design and common template including making Concreat fondation for garden lights pole of required size.

Supplying and fixing 8 way prewired SP&N MCB distribution board , incomer 32A DP MCB 01 , 10A SP MCB 06 of steel sheet for 240 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FRLS PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required.

Supply, installation ,testing & commissioning the following cable on wall/floor/ceiling/structure member or on cable trays or down through PVC pipes, using MS spacers and GI saddles, cable clamp etc. complete in all respect. Cable, conforming to IS: 1554/Part 1/1998, XLPE, , armoured, 1100 V class 4Cx2.5 sq.mm 2XY Copper Conductors including glands and lugs terminations

Supply, installation ,testing & commissioning the following cable on wall/floor/ceiling/structure member or on cable trays or down through PVC pipes, using MS spacers and GI saddles, cable clamp etc. complete in all respect. Cable, conforming to IS: 1554/Part 1/1998, XLPE, , armoured, 1100 V class 3Cx1.5 sq.mm 2XY Copper Conductors including glands and lugs terminations

SITC of 8 SWG GI wire for pole earthing earthing with including clamping and saddling and all fixing accessories

Supply, fabrication & installation of MS angle/ Strip/ plate / rod/ channel etc. as per given design duly painted with 2 coats of red oxide & 2 coats of enamel paint of approved shade all as per the instruction of EIC. 20 mm dia 1.5 long

Supply, installation ,testing & commissioning the following cable on wall/floor/ceiling/structure member or on cable trays or down through PVC pipes, using MS spacers and GI saddles, cable clamp etc. complete in all respect. Cable, conforming to IS: 1554/Part 1/1998, XLPE, , armoured, 1100 V class 4Cx 4sqmm 2XY Copper Conductors including glands and lugs terminations

Supply ,Installation,Testing & Commisioning of 2 X 45 Watt LED or equivalent Street Light having pressure die-cast aluminimum housing with Coated with epoxy zinc phosphate primer and finished using environmentally stable polyurethane based paint , suitable to following features. - -In built electronic LED driver, -High Transmisivity diffuser>85%, -IP-65/67 -High Efficacy, -Provide Uniform low glare lighting , -CRI-70, -Warm White -Operating Temperature:--40 to +60 Celsius degree -Operatable voltage - 220-240 V,50 Hz, PF>0.9, -Colour Temperature-3000K. including outdoor IP 67 Junction box with connecting terminals , glands and lugs

SITC of Wall mounted street light bracket GI type with clamp and all fixing accessories for fixing of LED street lights

Supply, fixing & testing of L & T/ BCH make ON Delay timer 0 to 60 Sec.with enclosure box

DM ENTERPRISES

NALANDA DECOR

OM POWER SYSTEMS