REPAIR TO PATH DRAIN FENCING JAFRI GATE SEWAGE AND OTHER MISC WORKS IN ZONE B UNDER AGE BR II AT BB CANTT SRINAGAR

Amount

Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth, for foundation or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and getting out in any type of soil complete all as specified and directed.

M&L for PCC (1:3:6), type C2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Returning filling in including, spreading, leveling and well ramming in layers not exceeds 25 cm thick in any type of soil complete all as specified and directed.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 (using 16mm graded crushed stone aggregates) in hollow block masonry exc. 10 cm in width and setting in CM 1:6 complete all as specified and directed.

M&L for walling of random rubble stone masonry uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

M&L for flush pointing to old random or polygonal rubble uncoursed or brought upto course stone masonry in CM (1:4) including racking out joints complete all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M & L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces finished even and fair complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in cills, roof kerb, seismic and other similar bands, copings, kneelers, apex stones, bed plates, bond stones and the like including weathering slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Demolition of RCC (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for precast RCC (nominal mix) 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles including necessary formwork complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for Framed brackets of angles or tees with web and flanges, cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F for Framed work such as angle iron frames for man hole, covers, grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with coach screws and washers, in roof, wall etc with grade of zinc coating 275 complete all as specified and directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors including taking up or down steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old unserviceable eaves gutters and rain water pipes of any size and pattern complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old unserviceable eaves gutters and rain water pipes of any size and pattern complete all as specified and directed.

S&F 150mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including taking down old unserviceable eaves gutters and rain water pipes of any size and pattern complete all as specified and directed.

Demolition of plain cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) etc complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course finished even and rough to receive floor finishes complete all as specified.

M&L for 75mm thick PCC (1:4:8), Type D-2 (using 40mm graded crushed stone aggregates) as in sub base/levelling course of floors etc complete all as specified and as directed.

M&L for rubber moulded chequered cement concrete tiles with grey cement and pigment of size 20cmx20cmx22-25mm thick, set, jointed and pointed in neat cement slurry laid over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over and including sand cushion as per site requirement complete all as specified and directed.

M&L for Providing precast cement concrete (1:2:4), Type B-0 (using 12.5mm graded crushed stone aggregates) louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame, set in CM 1:4 including dismantling of old unserviceable jallies complete all as specified and as directed.

M&L for second class soft wood clean swan, 40mm x 12mm laths (fixed straight or diagonally) in two way trellis work with 75mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round including taking down old unserviceable jafri complete all as specified and directed.

M&L for second class soft wood clean swan, 40mm x 12mm laths (fixed straight or diagonally) in two way trellis work with 100mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round including taking down old unserviceable jafri complete all as specified and directed.

S&F 2mm thick fiber glass reinforced translucent corrugated sheeting with two corrugations side lamp fixed with coach screw and washer in roof, wall etc including taking down old unserviceable fibre sheet complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.

M/S NEW IQBAL ENTERPRISES

M/S MOHAMAD YOUSUF AKHOON AND SONS

M/s Lal Enterprises

M/S SHAH CONSTRUCTION COMPANY

Alishan Builders

M/S SK ATLANTIC ENTERPRISES