Providing and fixing of profile sheets, doors and windows for stores of Garlick garage.

Amount

Providing and fixing of profile sheets, doors and windows for stores of Garlick garage

Removing existing GI sheets

Colour Coated Galvalume/zincalume sheets for cladding Providing and fixing single skin trapezoidal profiled sheeting 930 -1020mm cover width 28-32 mm crests depth at 186-250 c/c ( above 195 mm c/c crest distance there will be minimum 2 ribs at the centre for stiffening). The feed material shall be manufactured from AZ 150 (min. 150 gms/sq.mt total on both sides) Zincalume / Galvalume sheets of minimum yield strength of 550 MPa, 0.45 mm BMT, ( 0.5 mm TCT excluding paint coating thickness), metallic hot dip coated with Al- Zn alloy (55% Aluminium, 43.5% Zinc, 1.5% Si ) as per AS 1397 / IS15961 & painted with Super Durable Polyester Colorbond steel XRW or equivalent quality paint system of apporved color, suitable for exterior application conforming to AS/NZS 2728:2007 type-4 / IS15965:class3 of approved make. The sheet shall have a total coating thickness of 35 microns, super durable polyester paint system of 20 microns on exposed surface and 5 micron reverse polyester coat on back surface over 5 micron primer coat on both surfaces. The paint system shall have stable inorganic pigments for color durability. The product will be fastened using no.12-14x55 mm (or as per design requirement ), mechanically coated with 25 micron Zn-Sn alloy or hot dipped zinc coated with min 40 micron hex self-drilling fasteners with EPDM washer of approved make confirms to AS3566:2002 class 3.

Providing and fixing in position two track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 61.85 mm x 45.5 mm x 1.3 mm thk (wt 1.055 kg/Rm) for bottom, 61.85 mm x 31.75 mm x 1.3 mm thk. (wt 0.659 kg/Rm) for top & sides, mounted on anodized aluminum rectangular frame of size 63mm x 38mm x 2.0mm(1.054). The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26,7 mm x 1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)

Providing and fixing all sides polished Green marble thickness for door and window frames / architraves including preparing the surface and levelling in the desired line, machine cutting, jointing in approved adhesives, leveling, smooth cement plastering along the sides to match the existing surface in cement mortar, filling the joints with pigment mixed with cement, cleaning, finishing, curing etc complete as directed by Engineer In Charge.

Providing & fixing in position single leaf flush door of required sizefor internal doors of residential units, shutters madeof 45mm thickmarine grade block board core with 25mm x 45mm T.W. lippingpatti, 1mm thick approved decorative laminates finish on both faces ofshutter, including providing & fixing T.W. frame of 60mm x 150mm size,coating all the exposed surfaces of wood with 2 coats of flat enamel paint of approved shade & make over one coat of approvedsynthetic primer, coating all the surfaces of wood in contact withmasonary with Tar (Black Japan), preparing the surfaces, providing and fixing brass chrome finished or S.S. fittings and fastenings etc complete as per detailed drawing no. WD-26 & as directed by theEngineer in charge. D5,D7,D12,D8,D9,GL-D5

Providing and Fixing MS Safety grill weighing 10-15 kg/ sqm for windows as per design including fabricating the grill using M.S. square / round bar, flats and angles including painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc complete as directed.

REYANSH ENTERPRISES (BID ID -6545496)

SARTHAK ENTERPRISES (BID ID -6544447)