Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹14.7 LAccepted-AOC | L-1 | Accepted-AOC Lowest bidder | |
| 2 | L-2₹16.0 L+₹88,582 (5.86%)Rejected-Finance | L-2 | Rejected-Finance other than L-1 | |
| 3 | L-3₹18.8 L+₹3.7 L (24.2%)Rejected-Finance | L-3 | Rejected-Finance other than L-1 | |
| 4 | L-4₹19.3 L+₹4.2 L (27.5%)Rejected-Finance | L-4 | Rejected-Finance other than L-1 | |
| 5 | L-5₹19.4 L+₹4.3 L (28.6%)Rejected-Finance | L-5 | Rejected-Finance other than L-1 |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
18 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt Col Tapan Naurial, GE
Garrison Engineer 864 Enggr Wks Sec, PIN-913864,C/o 56 APO
Repair to certain B/R items under the AOR of AGE BR- III BB Cantt Srinagar
2023_MES_583431_2
864/WS-77/2022-23
Open Tender
Civil Works
Item Rate
180 days
B B Cantt.
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 864 EWS
₹40,000
Yes
2 May 2023
24 Mar 2023
20 Apr 2023
24 Mar 2023
18 Apr 2023
31 Mar 2023
Amount
Taking down chowkat with shutter (Without taking of shutter from frame) area exceeding 1.50 Sqm but not exceeding 4 Sqm each complete all a specified and directed.
Taking down chowkat with shutter (Without taking of shutter from frame) area not exceeding 1.50 Sqm each complete all a specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading.and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
S&F Solid PVC door frame of size 50mm X 47mm made out of 5mm wood grain colour PVC sheet reiforced with MS square tube, suppling & fixing in opening as per specification & drawing.
M & L for 100 mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. complete all as specified and directed
S&F for 100 mm long aluminum handles, cast type, anodized complete all a specified and directed.
S&F for 150 mm long Aluminium anodised, barrel tower bolts of ex truded section and fixed complete all a specified and directed.
S&F for anodised aluminium frame for doors, windows, ventilators,partitions with one or more rebates including joining cleat for fixing etc. complete all as specified and directed
Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed
Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed
S&F for Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and directed
S&F for 9 mm thick Pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice laminations fixed with cleat/ bedding, complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete, all as specified and as directed
M&L For Glazed ceramic coloured tiles 450mm x300mm x 6 to 7 mm thick,sharp edged (joint free), in vertical surfaces such as walls, skirting etc , set to match over and incl 10 mm thick backing/ rendering in cement mortar 1:3, complete all as specified and directed.
M&L For Glazed ceramic coloured tiles300x 200x 7 mm thick,sharp edged (joint free), in vertical surfaces such as walls, skirting etc , set to match over and incl 10 mm thick backing/ rendering in cement mortar 1:3, complete all as specified and directed.
M&L For Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and incl screed bed or bedding layer of cement mortar 1:4, 15mm thick complete all as specified and directed.
M&L For Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floor over and incl screed bed or bedding layer of cement mortar 1:4, 15mm thick complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting ,any gauge, thickness including roof covering etc complete all as specified and directed
Galvanized corrugated 0.63mm thick mild steel sheeting with two corrugation side lap, fixed with L-type or J-type or cranked hook bolts in roofs walls etc of class 8, all as spd and directed
Plain, galvanised, 0.63mm thick mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation boards/slabs/bankets, any thickness, including cover plate, complete all as specified and directed.
S&F for wall panelling with decorative laminate 0.9 mm thick type 1, of suface finish, colour and pattern approved, fixed with approved adhesive including and over 6 mm thick plywood grade BWR, type BB fixed with nails including and over 9mm thick plywood grade BWR, type BB fixed with nails to timber frame work complete all as specified and directed
S&F wooden laminated flooring 1200mm x200mm and 6-8mm thick over and including 9mm thick plywood grade BWR ,type BB( 05 Nos ply) fix with nails to timber framework, PVC (foam) cushion, incl cornices/ beadings, door profile complete all per as instructions of manufacturer and directed.
S&F for plywood 6 mm thick grade BWR, type BB fixed with nails to timber frame work complete all as specified and directed
S & F In repair hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete.all as specified and directed.
5mm thick PVC sheet fillet of width 20mm 'L' or 'U' for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
M&L for Khatamband pattern false ceiling, design as approved by GE with ornamental wood work over and including 12mm thick BWR plywood and necessary frame work and finally finishing with french polish (two or more coats) and fixed, complete all as specified and directed.
S&F Gypsum False ceiling 6 to 8 mm thick with texture finished (595 x 595 size) with pre-coated standard GI angle, Tee and grid suspended with 4 mm dia GI wire at 600 mm c/c , angle of size 25 x 25 x 0.7 mm fixed around, main Tee and cross Tee of the section 38 x 25x 0.7 mm with soffits clips, holding and level clips, complete all as specified and directed
French polishing on surfaces of any description, width or girth including cleaning and preparing the surface on old works with two or more coats, complete all as specified and directed.
Dismantling timber scantling under 40 sq cm as in fillets, rails, posts, rafters, purlins etc complete all as specified and directed
M&L for second class soft-wood clean sawn in scantling in any position in framed work, complete all as specified and directed
Dismantling stone slabs and tiles of any descriptions or thickness in floors aprins etc complete all as specified and directed
M & L for Chequered cement concrete tiles 20cm X 20cm X 25mm thick, with gray cement and no pigments set, jointed in neat cement slurry in floorsover and including 15mm thick screed bed CM 1:4, complete all as specified and directed.
Demolition of cement concrete (un reinforced) in ground floor and paving not exeeeding 15 cm thickness (below or above ground level), complete all as specified and as directed.
25 mm thick cement concrete 1:2:4 type B1, using 20mm stone aggregate as in flooring finished even and smooth w/o using extra cement, complete all as specified and directed.
M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing , complete all as specified and directed.
M&L Factory made Precast cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate as in road side kerb stone of size & shape as directed by Engineer-in-charge ,including necessary use and waste of form work if required and also including setting in cement mortar 1:4, complete all as specified and directed.
S&F in repairs venetian blinds fabric blinds vertical type including all necessary fittings of approved colour to match the existing size and quality including taking down existing venetian blinds of any type completely with fitings of any type and description, complete all as specified and directed.
Vitreous china water closet, 'Orissa pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, complete all as specified and directed.
Vitreous China wash down water closet pedestal pattern, white, pan EWC with plastic water closet seat, back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device accessories set and all fittings, connections including making connection, fixed in repairs, complete all as specified and directed.
10 ltr capacity PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with twin flush provision, fixed in repairs, complete all as specified and directed.
Viterous china wash basin, white flat back size 580 x 450mm incl waste couping CP 32mm dia chain and plug and porcelan stopper and CI brackets of angle iron 65 x 65 x 6mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32mm dia & CP grating with holes with 15mm bore CP centre hole basin mixer, fixed in repairs , complete all as specified and directed.
S & F , Angle valve / Stop valve15mm dia cast copper alloy chromium plated fancy type without shank and cup concealed type srewed for iron pipe or for union and fixed in repair , complete all as specified and directed.
S & F ,in repair PVC flexible connections PTMT 600mm long 15mm dia with flange nuts & washers, complete all as specified and directed.
Taking up or down 15/ 20mm bore dia, steel tubing & connections incl cleaning for refining or removal to store, complete all as specified and directed.
S&F steel water tubing galvanised 15mm bore, med grade fixed to walls and ceiling or in floor, complete all as specified and directed.
S&F steel water tubing galvanised 20mm bore, medium grade with all fittings fixed to wall and ceiling or in floor, complete all as specified and directed.
S & F in repair 15mm dia Bib taps cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe fixed in repair, complete all as specified and directed.
S&F in repair stop valve, cast copper alloy with crutch or butterfly handles, screwed both ends for 20mm bore iron pipe or bras ferrule, complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed
S&F for rolled mild steel as in main and cross beams, hip and jack rafters, purlins where connected common rafters and running rails and guides for sliding door, fixed with angle cleats or other connecting plated, Fe 410 -W (Gde E- 250) quality-A, complete all as specified and directed
M&L for two coats of synthetic enamel paint on steel Surfaces of any descri-ption, over 10cm in width or girth , not other wise described, over one coat of priming with red oxide or zinc chromate on steel surface.including preparation of new surface, complete all as specified and directed .
M&L for preparation of old painted wooden surface of any description over 10 cm width or girth with one coat of synthetic enamel paint complete all as specified and directed
Complete removal of existing treatment on old decorated plastered or unplastered surfaces of walls and applying two coat of oil bound distemper on walls,white or tinted including 3mm thick wall care Putty over a coat of primer, complete all as specified and directed
S&F in repairs, 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed
S&F in repairs, 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed
S&F in repairs PVC (SWR) bends 110 mm bore, complete all as specified and directed.
S&F in repairs PVC (SWR) bends 75 mm bore, complete all as specified and directed.
S&F in repairs PVC (SWR) 75mm Branch pieces, double (double Y) equal or unequal, complete all as specified and directed.
S&F in repairs PVC (SWR) 75 mm dia vent cowl, complete all as specified and directed.
PVC 75mm size floor traps with stainless steel grating including jointing to waste pipe fixed cncrete type B1 (1:2:4). complete all as specified and as directed.(ISI Mark)
Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.
M&L Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 , complete all as specified and directed.
15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4, finish surfaces even and smooth without using extra cement, complete all as specified and directed.
Rotational moulded polyethylene water storage tank , two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples and Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of bore 20mm (Minimum weight 210 gram) etc), incl dismantling existing water tanks,complete all as specified and directed.
M/S Mohd Shafi Bhat
M/S BASHIR AHMAD MIR
M/S AKMAL CONSTRUCTIONS
Alishan Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .