SUPPLYING ELECTRICAL ACCESSORIES,SWITCH GEAR,CABLES ETC FOR YEAR 2021-22

Amount

SUPPLYING ELECTRICAL ACCESSORIES,SWITCH GEAR,CABLES ETC FOR YEAR 2021-22

PVC copper wire 1 Sqmm

PVC copper wire 1.5 Sqmm

PVC copper wire 2.5 Sqmm

Twin core pvc to pvc aluminium service wire 6Sqmm

Insulation Tape ¾”,10 mtr

ICDP Main 32 A. 230 V

DP switch 32 A,230 v

Pianno Switch 5 Amp

Socket 5 Amp

Bell push 5Amp

Fan Regulator socket type

Pendent holder

Batten holder

Modular switch 5 Amp

Modular socket 5Amp

Modular combined switch socket 16 Amp

Modular switch 15 Amp

Modular socket 15 Amp

3 pin Top 6Amp

3 pin Top 15 Amp

Ding dong bell

Electronics Cordless bell

Flexible wire 40 x 36

Porceleian cutout 63 Amp

Porceleian cutout 100 Amp

Screw Driver 9 “

Insulated piller 8”

4 x 25 Sqmm pvc armoured cable

Line Teaster

4 pole contractor 45 Amp

Timer

MCB 6A TO 32 Amp

Supplying Submersible pump 2 hp

Pvc switch box 4 module

Pvc switch box 8 module

Casing capping patti

Fluorscent Tube light

LED Tube light 20 Watt

Electronic choke

Led Flood light 200 watt

Led street light 60 watt

LED fitting Driver 10 kVA protection

Exaust fan 15 “ heavy duty

Exaust fan 8 “

Halagoan flood light fitting

Halagoan Tube 500 w

Ceiling Fan 56”

Ceiling Fan 48”

Capacitor 2.25 MFD

Pedestal Fan air circulator 450 mm sweep heavy duty

Pedestal Fan air circulator 600 mm sweep heavy duty

Wall mounted fan 450 mm sweep

40 watts fluorescent Tube set

4 core 120 SQmm armoured cable

LED bulb 7 watts

LED bulb 15 watts

LED Panel light 15 watts

Two pole MCB 32 to 63 Amp

4 pole MCB 63 Amp

Aluminium Ladder (ghoda) 10 feet

Erecting PVC insulated PVC round sheathed 2.5sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

SUPPLYING ELECTRICAL ACCESSORIES,SWITCH GEAR,CABLES ETC FOR YEAR 2021-22

Point wiring in PVC trunking (casing-capping) with 1.5sq.mm (2+1E) FRLSH grade copper wire, flush type switch,earthing and required accessories

Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E) FR grade copper wire with flush type switch and required accessories

Wiring for plug on board with Switch socket, copper wiringand earthing

Supplying and erecting PVC Surface modular double mounting plate 4 modules complete duly erected.

Supplying and erecting PVC Surface modular doublemounting plate 8 modules complete duly erected.

Supplying and erecting PVC Surface modular doublemounting plate 12 modules complete duly erected.

Supplying and erecting PVC Surface modular double mounting plate 16/18 module complete duly erected.

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places

Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying & erecting mains with 2x6 sq.mm FRLSH copperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying & erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places

Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting PVC insulated PVC round sheathed 2.5sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

Supplying and erecting mains with ISI mark WP 2 x 6 sq. mm. 1100 V. grade aluminium PVC insulated and PVC sheathed wires on G.I. bearer wire No. 8 SWG complete erected

Supplying and erecting ISI mark modular type switch 6A / 10Aduly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying 6 amp. 3 pin plug Top bakelite type of 230 V. A.C. supply.

Supplying 16 amp. 3 pin plug Top bakelite type of 230 V. A.C. supply.

Supplying, erecting & terminating XLPE armoured cable 3½ core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XLPE armoured cable 3½ core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 3½ core 120 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 3½ core 150 sq. mm. aluminium conductor with continuous 12.97 sq. mm. (8 SWG) G.I. earth wire complete erected with glands & lugs,on wall/ trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XPLE armoured cable 4 core 16sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall /trusses/pole or laid in provided trench/ pipe

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe

Making trench of suitable width and depth in soft soil for laying provided LT cable up to and including 16 sq.mm complete as per specification no. CW-EXN-CTR

Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.

Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying & erecting 18W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying pedestal type air circulator 600 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM with speed regulator, overhead protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 metre length and hand shield type 3 pin6A. plug top complete with moisture proof treatment and ‘E’ class insulation.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 900 RPM complete erected in position

Supplying and erecting regular/ standard model ceiling fan of 600mm. sweep complete erected in position

Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF

Supplying and erecting regular/ standard model ceiling fan of 1400mm. sweep complete erected in position as per specification no. FG-FN/CF

Providing and erecting air circulator 450 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for230/250 Volts single phase, 50 cycles A.C. supply, with one metre of 3core lead wire and with moisture proof treatment to winding and with ‘E’ class

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Supplying and erecting electronic type step regulator for ceiling fan 600/ 900/ 1200/ 1400 mm. sweep, complete erected on provided switch board.

Supplying and erecting LED Flood light fitting of 150W,including lamp, with PF > 0.95,class IP 65 and above Housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete

Supplying and erecting ultra violet storage type water purifier ( RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water 7 to 8 litre/min with activated carbon filter and softener operating on 230 V single phase A.C. supply.

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.

Supplying and erecting ISI mark midget type 3.0 Ltr storage type water heater of ABS plastic body 3 kW,heating element 230/250 Volts 50 cycle AC supply with inlet and outlet, thermostatic control and thermal cutoff with 3 core PVC flexible wire leads complete duly tested and marking sr. no. and date of erection.

Supplying and erecting ISI mark midget type 10.0 Ltr storage type water heater of ABS plastic body 5 kW,heating element 230/250 Volts 50 cycle AC supply with inlet and outlet, thermostatic control and thermal cutoff with 3 core PVC flexible wire leads complete duly tested and marking sr. no. and date of erection.

Supplying and erecting ISI mark midget type 1.0 Ltr instand type water heater of ABS plastic body 1 kW,heating element 230/250 Volts 50 cycle AC supply with inlet and outlet, thermostatic control and thermal cutoff with 3 core PVC flexible wire leads complete duly tested and marking sr. no. and date of erection.

Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR Capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condenser at position

Supplying, installing, testing and commissioning split type variable speed inverter technology room Airconditioning unit 1 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall mounting type complete with refrigerant R410A/R32 and copper ondenser at position.

Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 2 TR capacity having ISEER minimum 3.50 to maximum 3.99 suitable to operate on 250V, 50 cycles, A.C. supply having 1 no. of air handling unit hi-wall/ floor mounting type complete with Refrigerants R410 A/R32 and copper condenser at position

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power)

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power)

Supplying, erecting & marking DPMCB 40A to 63A, C- series (for motor/power) in provided distribution board

Supplying & erecting original 1.25 mm CRCA sheet metal enclosures with 20A. 2 pin plug & earth socket and 20A. 3 pin plug top with 20A/30A single pole MCB complete

Spike guard Protector 4 switch 4 socket

Supplying, fixing and commissioning change over switch 4 pole, 100 A

Supplying, fixing and commissioning change over switch 4 pole, 200 A

Supplying and installing Water Dispenser having Hot /cold cabinet both facility, floor mounted.

Supplying & erecting Condenser 2.25 mfd

Supplying & erecting Bulb holder.

Supplying and erecting PVC trucking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling

Supplying and erecting GI sheet 1.25 mm (18 SWG) to be used for fabrication of boxes panel boards etc. including cutting, bending, drilling, welding, riveting etc. and painting with one coat of red lead paint and 2 coats of enamel paint

Supplying and erecting ISI mark G.I. pipe pole ‘B’ grade 80 mm dia 6 m long with pole cap, base plate in provided foundation

Supplying and erecting 12.5 m (clear height) High Mast (Top- 150mm, Bottom- 360mm) with lowering and raising motorized unit, lantern carriage assembly suitable for max. 6 nos. luminaries and its control gear box, lightning finial arrangement for fixing aviation light and foundation bolts on provided foundation

Supplying and erecting 9m (clear height) fixed type-High Mast (Top- 100mm, Bottom- 200mm) with hexagonal/round bracket and foundation bolts suitable for max. 4 nos floodlight fixtures on provided foundation

Supplying and erecting 9m (clear height) fixed type-High Mast (Top- 100mm, Bottom- 200mm) with hexagonal/round bracket and foundation bolts suitable for max. 4 nos floodlight fixtures on provided foundation

Providing & erecting 6 m high (clear height) galvanized octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70mm A/F

Providing & erecting 6 m high (clear height) galvanized octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70mm A/F

Providing & erecting 8 m high (clear height) galvanized octagonal pole with foundation bolts having bottom of 135 mm A/F, top 70mm A/F on provided foundation

Providing & erecting 9 m high (clear height) galvanized octagonal pole with foundation bolts having bottom of 155 mm A/F, top 70mm A/F on provided foundation

Providing and erecting galvanized 1000mm single arm sword type bracket with FRP dome and ball

Providing and erecting galvanized 1000mm double arm sword type bracket with FRP dome and ball

Supplying and erecting outdoor stand mounted feeder pillar for high mast of the same manufacturer with 32A TPN MCB incomer, single dial timer switch, 25A TP contactor for automatic switching of luminaries, 2 nos 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables erected in min. 14 SWG CRCA sheet box with supporting angles, self-lock, gasket and slanting top erected with CC foundation complete.

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials

Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Making cement concrete foundation including excavation ( 45 x 45x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal,(45 x 45 x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (for 6 m pole)

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 9m & 10m high octagonal /conical GI pole).

Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast).

Painting of pipe pole upto 6 m length along with street light / pole brackets / clamps etc by scrapping the existing paint complete.

Painting of steel tubular / rail / RSJ pole above 6.0 m length along with street light pole brackets, clamps etc by scrapping theexisting paint complete.

Painting identification number by indelible ink marker / enamel paint on fittings / equipment with the help of ladders if necessary, by dismantling and refitting the enclosures, tubes etc if required the same and refitting complete.

Rewinding motor of the 1200/1400 mm ceiling fan and overhauling including minor repairs lubricating of ball bearings & bush bearing, and replacing condenser, screws etc. Testing of fan for original speed and consumption with guarantee for one year

Supplying and erecting LED street light fitting suitable for 60W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete

Supplying and erecting LED street light fitting suitable for above 70W- 75 lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete

Supplying and erecting LED street light fitting suitable for above75W - 90W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete

Supplying and erecting LED street light fitting 100W, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete

Supplying and erecting LED street light fitting 150 W, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete

Supplying and erecting LED Flood light fitting of 150W, including lamp, with PF > 0.95, class IP 65 and above Housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete

Supplying and erecting LED Flood light fitting of 200W, including lamp, with PF > 0.95, class IP 65 and above Housing of pressure die cast aluminum alloy and heat sink extruded aluminum complete

Sunbud Multiventures Pvt Ltd