PHC Badsha

Amount

Earth work in excavation in foundations, trenches, etc. in all kinds of soils, not exceeding 2 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil, clear from the edge of excavation and subsequent filling around masonry, in 15 cm. layers with compaction, including disposal of all surplus soil, as directed within a lead of 30 metres. (HSR 6.6)

Dismantling Brick Wrok, Tile Masonry or Tile Lining and Tile Terracing (HSR 8.5) (b) In cement

Dismantling Roofing (HSR 8.8) (g) demolishing mud phaska in tile terracing

Scrapping (HSR 8.32) (a) White wash and colour wash

Scrapping (HSR 8.32) (c) Cement plaster

Cement concrete 1:8:16 with stone aggregate 40 mm nominal size in foundation and plinth. (HSR 10.28)

Cement concrete 1:4:8 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.38)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size in first storey upto 4 metres above plinth level (HSR 10.59)

Precast cement concrete 1:2:4 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mmthick cement plaster 1:3 on exposed surface including form work, placing and fixing in position, complete at the ground level or in first storey. (HSR 10.77)

Cement concrete 1:1½:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respect. [HSR. 10.82 + 10.95 (a)].

Providing and laying 60 mm thick ISI Marked interlocking paver blocks (conforming to IS 15658:2006) of all shapes and colours of design mix cement M-35 over a bed of 25 mm thick fine sand complete in all respect. (HSR 10.158)

First calss brick work laid in cement sand mortar 1:6 in foundation and plinth (HSR 11.2)

First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level (HSR 11.7)

Terracing consisting of tiles 22.86 cm X 11.43 cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25mm mud mud plaster and an other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 Kg per sqm on top of R.C.C. slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13)

Cement concrete 1:2:4 gola 10 cm X 10 cm quadrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR 13.64)

Providing & fixing PVC Rain Water pipe 6 Kg pressure of ISI mark in cement mortar during masonry work. (HSR 13.89) (a) 100 mm dia. PVC pipe 6 kg. pressure

Providing & fixing PVC Bend ISI Mark (HSR 13.90) (a) 100 mm dia. PVC Bend

Conglomerate floor 40 mm thick cement concrete topping 1:2:4. (HSR 14.9)

Providing and fixing vitrified tiles of size 600x600mm of approved make in flooring laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, BELL, JOHNSONS, RAK, SIMPOLO & OASIS (HSR 14.89)

Providing and fixing vitrified tiles of size 600x600mm of approved make in skirting/dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade to tiles. Note:- Tile shall be of premium quality (first quality) of reputed manufacturer like NITCO, KAJA-RIA, SOMANI, ORIENT BELL, JOHNSONS & RAK AND SIMPOLO AND OASIS. (HSR 14.90)

Providing and fixing 1st auality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manu-facturer) of approved make in all colours, shades except gurgundy, bottle green, black of any size as approved by Engineer-In-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in whte cement mixed with pigment of matching shades complete. (HSR 14.92) a) Size of ceramic Glazed tiles 200x300mm

12 mm thick cement plaster 1:6 (HSR 15.7)

15 mm thick cement plaster 1:4 on the rough side of single or half brick wall. (HSR 15.10)

10 mm thick cement plaster 1:4 (HSR 15.52)

Applying pink prier or aluminium priming coat on wood work including preparation of surface, knotting and stopping, etc. (HSR 16.2) (T.R.)

Painting two coats excluding priming coat with synthetic enamel paint in all shades of new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 16.3) (T.R.)

Applying priming coat with metal primer on new steel or iron work including preparation of surface. (HSR 16.9) (T.R.)

Painting two coats excluding priming coat with ready-mixed paint for metallic surfaces in all shades on new steel or iron work. (HSR 16.17) (T.R.)

Painting two coats with ready-mixed exterior paint in all shades on newly plastered or concrete surface of walls. (HSR 16.26 ) (T.R.)

Distempering with washable oil bound distemper (of approved manufacture) two coats over one priming coat on new work (HSR 16.58) (T.R.)

Distempering with washable oil bound distemper (of approved manufacture) two coats on old distempered work. (HSR 16.60) (T.R.)

Providing two coats of exterior acrylic emulsion paint (HSR 16.79) (b) 1st quality (T.R.)

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labour charges, scaffolding, sundries etc. complete (J.K. / Birla make) (HSR 16.81)

Factory manufactured solid flush door shutters, with block board core as per I.S. No.1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II , fixed in position, including iron hinges, screws, chocks/cleats and stops, etc., (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position) (HSR 17.93) (a) Commercial veneering with vertical grains or cross bands and face veneer on both sides commercial facing with laminated core and lipped edges:- (iii) 35 mm thick

Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12)

Fe -500 EQR TMT steel bars for RCC works where not included in the complete rate of RCC including bending , binding and placing in position complete (HSR 18.22)

Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified section, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, and cement concrete 1:3:6 for lugs complete (HSR 18.34) (b) Door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate

(d) Door and window frame of size 114 mm X 50 mm with 35 mm wide double rebate.

Constructing brick masonry inspection chamber sizes as given below upto 0.60 metre average depth in cement mortar 1:5 lime concrete with 40 percent limer mortar 2:3 in foundation cement concrete 1:2:4 benching 12 mm thick cement plaster 1:2 with a floating coat of 1 mm thick of neat cement R.C.C. 1:2;4 slab 100 mm thick./C.C. topping 50 mm thick with 455 mm x 455 mm 610 mm inside light duty C.I. inspection chamber cover and frame weight as per I.S.I. specification painted with 3 coats of black bitumastic superior paint coplete as per standard design. (HSR 29.84) (a) Size 450 mm x 450 mm in side (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C.topping)

(b) Size 450 mm x 600 mm inside (with 455 mm x 610 mm cover and frame single seal pattern I weighing 38 kg with C.C. topping)

Providing & Fixing in position best Indian make (to the approval of the Engineer-in-charge). Indian type orissa or orya water water closet suite for sinking into floor, with raised foot treats complete with 100 mm H.C.I.'P' trap with or without vent as required and all other necessary fitting as fully described in item No. 30.1 (above) (HSR 30.2) (a) Size 580 mm (i) White

Providing and fixing in position best Indian make (as approved by the Engineer-in-charge) European type water closet suite, syphonic type consisting of (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH “P” or “S” TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND AKING GOOD THE WALLS AND FLOORS (HSR 30.5) (a) Single trap Syphonic W.C. Suite (ii) Single colour

EXTRA OVER item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY LOW LEVEL VITREIOUS CHINA WARE CISTERN complete with flush bend all other necessary fittings instead of C.I. high level cistern complete with fittings. (HSR 30.12) (i) White

EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow black or white plastic seat and lid. (HSR 30.13) (i) White plastic seat (Solid)

EXTRA FOR providing and fixing 32 MM dia. G.I./C.P. FLUSH PIPE compelte with accessories instead of 32/MM dia. Galvanised telescopic flush pipe with clips (as required by the Engineer-in-charge). (HSR 30.15) (a) 32 mm dia. G.I. flush pipe

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE (ORDINARY) LAVATORY SUITES consisting of Lavatory in VITREOUS CHINAWARE size as given below (to the approval of the Engineer-in-charge). (HSR 30.41) WHITE (v) Size 560 mm X 450 mm with one no. tap

PROVIDING AND FIXING IN POSITION 32MM DIA. G.I. WASTE PIPE EMBEDDED IN WALL or lead waste pipe (weighing 3.47 kg per metre and 2.8 mm thick) upto floor level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge). (HSR 30.48)

Providing and fixing in position best Indian make chromium plated brass Bottle trap 32 mm dia. Metre (HSR 30.50)

PROVIDING AND FIXING IN POSITION BEST QUALITY STAINLESS STEEL SINKS WITH COMPLETE FITTINGS AS FULLY DESCRIBED IN ITEM NO. 30.51 ABOVE. (HSR 30.53) (a) Size 600 mm x 450 mm x 200 mm

PROVIDING AND FIXING 40 MM I/D G.I. WASTE PIPE EMBEDDED IN WALLS OR LEAD WASTE PIPE weighing 4.46 Kg./metre and 3.0 mm thick UPTO FLOOR LEVEL as required by the Engineer-in-charge INCLUDING COST OF UNION AND PLUMBER JOINT. (HSR 30.62)

Providing and fixing 40 mm i/d chromium plated brass trap with chromium plated brass pipe to wall with wall flange, complete (as per requirement of the Engineer-in-charge) for use with sinks (HSR 30.63 ) (a) With Bottle Trap (Indian make)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE PAPER HOLDERS FIXED INTO wall with C.P. brass screws complete in all respects INCLUDING CUTTING AND MAKING GOOD with WALLS ETC. (HSR 30.67) (a) C.P. brass

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P. brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.68) (a) 25 MM DIA C.P. BRASS ADJUSTABLE (i) 750 mm long

PROVIDING AND FIXING IN POSITION GLASS SHELF FIXED IN WITH RAWL PLUGS WITH C.P. BRASS SCREWS COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.69) (a) With C.P. brass brackets and guard rail (i) 600 mm X 125 mm

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P. brass screws and complete in all respects including cutting and making good the walls etc. (HSR 30.70) (a) C.P.BRASS (i) Soap dish large

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRROR mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHROMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.71) (a) INDIAN MAKE (i) 600 mm X 450 mm

Providing and fixing in position superior quality 65mm i/d opening C.P. brass dome type hinged grating weighing about 750 gms. Fixed in cement mortar 1 : 2 complete in all respects (as required by the Engineer-in-charge). (HSR 30.74)

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge). (HSR 30.75) (a) Bib cock long body

Providing and fixing in position C.P. brass stop cocks (as approved by the Engineer-in-charge) (HSR 30.76) (a) 15 MM STOP COCK (ii) Concealed stop cock with flange

Providing and fixing C.P. brass liquid soap container of best quality (as required by the Engineer-in-charge). (HSR 30.77)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLEXIBLE TUBE CONNECTION (HSR 30.82) (b) C.P. Brass (iii) 15 mm X 450 mm

Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K. Supreme make with covers/lids marked with IS:12701 on roof top of buildings including cost of hoisting and placing in position, making connections with ilet and outlet pipes, providing over flow and scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer-in-Charge. (Except civil work) (HSR 30.119) 1000 Ltr. Capacity

Providing and laying 150 mm thick (in two layer) Granular Sub Base (GSB) conforming to Table 400.1 Grading-I of MoRT&H 5th edition, mixing in a mechanical mix plant at OMC, carriage of mix material to the site of work, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve desired density complete as per clause No. 401 table No. 400.2 (grade-I) of MoRT&H specification for road & bridge (5th Revision) of 2013 latest edition as per Clause No. 401. (N.S) Note:-only curst material should be used no local earth/sand shall be used. The material finer than 425 micron shall have zero Plasticity Index (PI). (NS)

Providing for laying, jointing, fixing and testing G.I. (Medium class "B" type of Tata & Jindal make) pipe lines and specials tees bends, sockets, elbows etc. inside building and testing etc. complete including cutting threading. Including cost of Special. G.I. specials shall be of Make:- UNIK, TATA, ZOLOTO. (NS) (i) 15 mm internal diameter of pipeline

(ii) 20 mm internal diameter of pipeline

Providing, fixing and jointing union couplings in G.I. and W.I. pipelines. (NS) (a) 15 mm internal diameter

(b) 20 mm internal diameter

The Nirmal Coop L C Society Ltd.