A/R and M/O to AE Office building at Kasauli

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge. including carriage of materials with in all leads and lifts and other incidental charges.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.or as directed by the Engineer-in-Charge including carriage of materials with in all leads and lifts and other incidental charges.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) as per the direction of Engineer-in-charge. including carriage of materials with in all leads and lifts and other incidental charges.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.as per the direction of Engineer-in-charge. including carriage of materials with in all leads and lifts and other incidental charges.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.as per the direction of Engineer-in-charge. including carriage of materials with in all leads and lifts and other incidental charges.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work as per the direction of Engineer-in-charge. including carriage of materials with in all leads and lifts and other incidental charges.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)as per the direction of Engineer-in-charge. including carriage of materials with in all leads and lifts and other incidental charges.