Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹45.2 LAccepted-Finance | 1 | Accepted-Finance Lowest rate | |
| 2 | 2₹46.8 L+₹1.6 L (3.50%)Rejected-Finance | 2 | Rejected-Finance Not Lowest rate | |
| 3 | 3₹47.5 L+₹2.3 L (4.99%)Rejected-Finance 3 395 NARIPATTI PALAKKANUTHU POST DINDIGUL 624619 | DINDIGUL | DINDIGUL | TAMIL NADU | 624619 | 3 | Rejected-Finance Not Lowest rate | |
| 4 | Rejected-Technical DOOR NO 1 325 SUNDARRAJ NAGAR STATE BANK COLONY PERUMALPURAM THENI DIST 625 601 | PERUMALPURAM | THENI | TAMIL NADU | 625601 | - | Rejected-Technical No experience and anuual turnover not met |
Tender Value
₹48 L
EMD Value
₹48,000
Closing Date
3 Nov 2022, 3:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The General Manager
Theni DCMPU Ltd, 3-1-11/1, Natesh Amman Nagar, P.C.Patti, Theni-625 531.
CONSTRUCTION OF HI-TECH PARLOUR CUM BULK MILK COOLING CENTRE AT KOTTUR VILLAGE IN THENI DISTRICT
2022_TCMPF_257422_1
2025/eTender/2022
Open Tender
Civil Works
Lump-sum
180 days
Theni
The tenderer is requested to ensure that the important documents listed in Tender Document are duly attested by Notary Public and uploaded before submission of tender through e-tender to avoid rejection.
6 documents required · 6 mandatory
₹0
₹48,000
Yes
Theni
10 Nov 2022
20 Oct 2022
4 Nov 2022
20 Oct 2022
3 Nov 2022
21 Oct 2022
28 Oct 2022
Amount
Earth work narrow excavation for foundation in all soils and sub soils and to full depth as may be directed except hard rock requiring blasting inclusive of shoring, shuttering and baling out water where ever necessary, refilling the sides of foundations with excabvated earth in layers of not more than 15cm thk watered, well rammed , consolidated and depositing the surplus earth on bank with initial lead of 10m and initial lift of 2m, clearing and leveling the site etc., complete as directed by the federation officers and as per standard specifications.
0.0m to 2.00m - Hi-Tech parlour
0.0m to 2.00m - Retaining Wall
Supply and filling with M sand for foundation and basement to required thickness and in layers of not more than 15 cm thick, watered, well rammed and consolidated etc., complete as directed by the Federation Officers and as per standard specifications.
Hi-Tech Parlour
Retaining Wall
Supplying and filling with conveyed Gravel from approved source of supply with a lead of 0 to 50km for foundation and basement to required thickness and watered ,well rammed and consolidated etc., complete as directed by the Federation officers and as per the technical Specifications.
Hi-Tech Parlour
Retaining Wall
Cement Concrete 1:4:8 (One Cement, four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
Hi-Tech Parlour
Retaining Wall
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid).
From Basement to plain surface
From Basement to Column surface
0 to 3.30 m Plain Surface
3.30 to 4.30 m Plain Surface
4.30 to 5.30 m Plain Surface
5.30 to 6.30 m Plain Surface
0 to 3.30 m Column Surface
3.30 m to 4.30 m Column Surface
4.30 m to 5.30 m Column Surface
5.30 m to 6.30 m Column Surface
From Basement to plain surface - Retaining Wall
0 to 3.30 m Plain Surface - Retaining Wall
3.30 to 4.30 m Plain Surface - Retaining Wall
Reinforced Cement Concrete 1:1-1/2:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. Foundation and Basement
Foundation and Basement
Ground Floor
First Floor
Foundation and Basement - Retaining Wall
Ground Floor - Retaining Wall
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire). Hi-tech parlour
Hi-Tech Parlour
Retaining Wall
Brick work in following Cement Mortar using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-3/4" for foundation and basement including curing, etc., complete complying with standard specifiction.Upto Basement
Upto Basement
Ground Floor
First Floor
Terrace
Brick partition walls of 10.80cm thickness using best quality country Brick of size 9" x 43/8" x 23/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.
Paving the floor with best quality stain free nano polished vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification
Flooring with Anti skid Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mmceramic tiles laid over 20 mm thick cement mortar 1:3 (One Cement and Three Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by department officer before use on works)
Dadooing walls with colour designed digital printed ceramic tiles of size 300mm x 450mm x 8mm and above in best approved quality tiles set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification ( Non branded) and as directed by the departmental officers.
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Providing Aluminium Auodised door with necessary hardware fittings like door closer,hinges,handle etc.,complete as per department officers standard instructions & specifications.
Providing Aluminium Auodised window with necessary hardware fittings like door closer,hinges,handle etc.,complete as per department officers standard instructions & specifications.
Providing Aluminium Auodised ventilator with necessary hardware fittings like door closer,hinges,handle etc.,complete as per department officers standard instructions & specifications.
Supplying and Fixing of 12mm Toughned Glass With Necessary Hinges and Fixtures and door arrangements along with Handles For Parlour front glazing work.complete as per department officers standard instructions & specifications
Supplying fabricating erecting and fixing gyp board false ceiling upto a ceiling height of 4.50 m from floor level. Using plain sheets 10mm thick (Hilux Borad) inclusive of materials,labours and conveyance etc.complete as per department officers standard instructions & specifications
Supplying, laying and jointing 25 mm PVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. 25 Mm dia pipe
supplying pvc specials(with working pressure 10 kg./ sq.cm) in water supply arrangements,labour for cutting ,threading/ pasting ,sundries have already been included under pipe line items of work no separate provision for pvc specials need to be allowed.
Pvc Elbow 25mm dia
Pvc Tee 25mm dia
Coupler 25mm dia
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works). White Glazed Wash Hand Basin Without Pedestal
Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). Above Ground Level
110mm dia pipe
75mm dia pipe
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 4 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). Above Ground Level 110mm dia pipe
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
110 mm dia PVC Elbow
110 mm dia PVC Tee
75 mm dia PVC Elbow
75 mm dia PVC Tee
110 x 75 mm dia Reducer
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. 25mm dia
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) Cast Iron Nahani Trap of size 100 x 75mm with stainless steel gratings
Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.,such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Department Officer before use on works)
Supplying and fixing best approved best quality Stainles steel Health Faucet with Stop coak of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The Health faucet should be got approved by Executive Engineer before use on works).
Supplying and fixing approved best quality Aluminium Auodised Towel rail 600 mm long with lower hanger etc., complete, complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc. ROLLING SHUTTERS (WITH ISI MONOGRAM) Gear operated Type
Supplying and fixing 1000 litres capacity PVC water tank etc., complete complying with standard specifications and as directed by the departmental officers.
Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.
Supplying and fixing mild steel iron grill for truss, straps etc., (wrought & fixed) Hoisting charges, cutting, welding, threadingn including painting etc., complete.
supplying and fixing Galvalume colour roofing sheet 0.47mm thick.
Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation andheights. The extruded section cutting and fixing required space extruded section shall be of 6063 andalloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
Supplying and fixing in position best quality approved make Stainless steel sink of size of 600 x 450 x 200mm including cost of 32mm dia CP waste coupling, 32mm dia PVC waste pipe with rubber plug and chain, 15mm dia brass nipple including fixing the sink in position and testing for leakages etc., complete complying with standard specifications excluding CI brackets. [The sink and specials should be got approved by the Executive Engineer before use on works]
Providing Aavin LED Lettering in English in acrylic sheet "AAVIN" of size with 2' ht,1.5' width and 2.5' depth.
Providing Aavin LED Lettering in Tamil in acrylic sheet "AAVIN" of size with 2' ht,1.75' width and 2.5' depth.
ELECTRICAL WORKS: Wiring with 2X1.5 sqmm (22/0.3) PVC insulated unsheathed SC unsheathed Cu.conductor of 1100v grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW swith box and 5 A.F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan point ( for electronic regulater) ( 5 point per coil)
Wiring with 2X1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.conductor of 1100v grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW swith box and 5 A.F and making good of the concealed portion with suitable colour for PVC concealed light ( 6 point per coil) ( For room like bath, toilet& pump room etc)
Wiring with 2X4 sqmm (56/0.3) PVC insulated unsheathed SC unsheathed Cu.conductor of 1100v grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150mmX100mmX113mm TW switch box with 3mm thick hylum sheet for 15 A 3 pin non inter locking wall socket with 15 A Flush type switch with continuous earth wire connection of 14 SWG TC wire, and making good of the concealed portion, with suitable colour for concealed power plug point
Supply and fixing of 5A/15A 3 pin combined flush type wall socket with 15 A flush type switch on suitable TW Box
Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5 A flush type switch on suitable TW Box
Ac Ceiling Fan complete 1200 mm (48") Sweep with 300mm Down Rod (without Regulator).
Supply and fixing of single box type 4'36 W flu fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting
LED INDOOR FITTINGS ( LIGHT EMITTING DIODE) :
18 W LED 3000 K square Type Recessed Fitting.
18 W LED Normal Type.
LED OUTDOOR FITTING (WALL MOUNT) : supply and fixing of 30 W LED.
Earthing as per the ISI Specification with an earth electrode of 2.1mt class 'B' GI Pipe of dia not less than 40mm, with copper earth plate of size 125mmX50mmX6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonary.
supply and fixing of TNEB Meter Board suitable for 3 phases 63A service connection made up of suitable angle iron frame work of size 2 feetX 1 1/2 feet using angle iron of size 1 1/2"X 1 1/2"X 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feetX 1 1/2 feet of 6mm thickness with necessary bolts and nuts supports andsupply and fixing of 3 nos 63A fuse unit (500v) 1no. neutral link, copper earth flat of size 1'X1/4" with interconnection of Eb meter to fuse units by 7/16 PVC insulated copper wire earth connection complete.
supply and fixing of horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door (metal) with 40A 4 pole MCB Isolater as incoming and 16 nos.6Ato32A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. the MCBDB and MCB's should be with the ISI mark (like standard make).
Change over switch of 63AMP with Three Phase 500V 4 Pole ( main power, genset, output) with neat metal enclosure etc complete.
Supply and fixing of 20 AMPS DP PLUG and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection ( for AC PLUG) ( Legrand (MDS) / Hager (L&T) make).
Supply and fixing of led strip light over the flase ceiling as directed by the departmental officer.
BOREWELL WORKS: Geological Survey charges for divining water points forcedrilling the bore wells including helpers, transport charges and Fee etc
Drilling of borewell anywhere in Tamilnadu including transportation from one place toanother place within Tamilnadu in alluvial soil or sedimentary strata of clay and sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor’s rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit (only Calyx drills are to be used). A. Drilling 140 / 150 mm dia Pilot Bore upto 60m depth ending below ground level
A. Drilling 140 / 150 mm dia Pilot Bore upto 60m depth ending below ground level
B. Labour charges for inserting 150 mm dia M.S. Casing pipes assembly (With slots or without slots) in the drilled hole including welding the One metre 275.81 joints and packing annular space with pebbles of size and quality as approved by the Executive Engineer / TWAD Board
D. charges for developing the borewell with air compressor of 300 CFM capacity (Minimum 8 Hours) including transportation labour and fuel charges for compressor as directed by TWAD Board Officers and conducting yield test by ‘V’ notch method.
Supply and Erecting 150mm dia PVC casing assembly
Supply and Fixing of 160 mm dia PVC end cap
Supply and installation of single phase sub-mersible pumpset without panel board.
Supply and Fixing of Three phase panel board with two level gaurd and autostart
Supply and delivery of the following pipe and specials for the erection of pumpset and inlet connection to tank
A.40mm Dia U-Pvc borewell pipe
B.32 mm dia Hex nipple B
C.50 mm dia Non retuen valve
D.50 mm dia Gi Union
wiring charges for motor board, and cabling work from motor to board.
Supplying and fixing of 1"UPVC Suction pipe From bore well to OHT.
Supply and fixing of 3/4" GI pipe
ERECTION OF POWER PUMPSET IN WELL: upto 3 HP
GST Note: The tenderer should quote the amount towards Goods and Service tax (GST) in the appropriate columns in terms of percentage (%). If not quoted, it will be considered that the rate quoted is inclusive of GST.
HI-STAR BUILDERS
VKS INFRATEC PROJECTS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .