Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹85.5 LAccepted-AOC | L1 | Accepted-AOC Lowest tenderer | |
| 2 | L2₹1.1 Cr+₹18.9 L (21.8%)Rejected-Finance | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | Rejected-Technical REGD OFFICE VILLAGE KHEJURI TEHSIL SIKANDARPUR DISTT BALLIA UTTAR PRADESH | BALLIA | UTTAR PRADESH | 277303 | - | Rejected-Technical Rejected as firm not meeting Class critera as per NIT | |
| 4 | Rejected-Technical MISRA ELECTROSTATE CENTRE BAR ASSOCIATION COMPOUND CIVIL COURT AYODHYA 224123 UP | AYODHYA | AYODHYA | UTTAR PRADESH | 224123 | - | Rejected-Technical Rejected as firm not meeting Class critera as per NIT |
Tender Value
₹1.1 Cr
EMD Value
₹1.8 L
Closing Date
23 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Prayagraj
HQ CWE New Cantt Prayagraj
SPECIAL REPAIR TO U BLOCK BLDG NOS. 19, 20, 21 AND 22 OF DRC AYODHYA UNDER AGE (I) AYODHYA CANTT.
2023_MES_613202_1
81770/AYD/E8
Open Tender
Civil Works
Item Rate
120 days
Ayodhya
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
AGE (I) Ayodhya
₹1.8 L
Yes
11 Nov 2023
10 Aug 2023
30 Sept 2023
11 Aug 2023
23 Sept 2023
9 Sept 2023
Amount
Dismantling the AC (corrugated or semi corrugated) /fibre glass translucent sheet form the roof coverings complete all as specified and directed.
S&F Pre-painted galvatumealuminum zinc coating GI based corrugated steels heet 0.50mm thick of ancolour having tensilestrength of 550 Mpa as in roof covering/cladding towall, fixed with selftapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof ridge fixed with self tapping screws complete all as specified and directed.
Taking down Chowkat with shutters (w/o taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm complete all as specified and directed by Engineer-in-charge.
Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed by Engineer-in-charge.
Taking down cement plaster from brick or stone walls any description including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc., complete all as specified and directed.
Dismantling of floor,wall tiles incl cement mortar bedding but not backing removing serviciable tiles to stores complete all as specified and directed.
M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in CM (1:4) finishing the surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15m thick cement plaster on other than fair faces of brick work or concrete surfaces CM (1:6) finished even and smooth without using extra cement complete all as specified and directed.
M&L for 1 mm thick wall care putty on external and internal wall over newly plastererd surfaces complete all as specified and directed.
M&L screed bed or bedding layer of mortar (1:6) 15mm thick for laying floor finises of tiles complete all as specified and directed.
M&L for rendering 10mm thick in cm 1:4 on verticle surfaces of wall for fixing of wall tiles complete all as specified and directed.
M&L for dark shade vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.. Note :- Colour and design approved by Engineer-in-Charge.
M&L for non skid ceramic coloured tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc 0.11sqm but n.exc 0.18 Sqm coloured in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement complete all as specified and directed by the Engineer-in-Charge.
M&L for glazed ceremic coloured tiled in vertical surfaces 450mmx300mmx8mm/600mmx300mmx9mm thick (as approved by Engineer-in-Charge) set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
M&L chequered cement concrete tiles 25cm x25cm x 22mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed.
Demolition of concrete of any description and in any position complete all as specified and directed.
M&L for cement concrete type B-0 (1:2:4 (12.5 mm graded crushed stone aggregate) for roof Padding complete all as specified and directed.
M&L for 40 mm thick PCC (1:2:4) type B-1 (20mm graded crushed stone aggregate) as in top of floor of any position complete all as specified and directed.
M&L for cement concrete tiles 25cm x 25cmx 22mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polishedcomplete all as specified and directed.
Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed..
M&L for E-board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong or equivalent) frame work with the following specification including cutting holes in brick wall built cement mortar & making good in cement concrete 1:2:4 type B-0/Cement mortar 1:3 complete all as specified and directed with following :- (a) M&L fo Plugging to wall around the room and supplying & fixing GI powder coated angle of make (Armstrong or equivalent of size 25 X 25 mm X 1.0 mm. (b) S&F 2 mm dia GI wire suspenders with adjustable clamps and dash free fastners with rawl plug and screws plugging in RCC slab placed @ 605 mm centre to centre from perimeter of wall. (c) S&F 25 x 25 x 1.0 mm thick GI tee powder coated as main and cross member at 595 mm centre to centre supported suspenders along with adjustable clamp to maintain level. (d) S&F 4mm thick E-board of approved texure and finished ceiling tiles of size 595 x 595 mm, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of tiles shall be approved by Engineer-in-Charge.
Supply and fixing factory made UPVC white colour three track panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of frame 110x 45mm & sash 40 x 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/double glazing bead of approproate dimension comprising of UPVC multi chambered frame. with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galanized mild steelsectin made form roll forming process of required length ( shape & size according to UPVC profile) , appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy ( white powder coated) touch locks with hook , zinc alloy body with single nylon rollers (weight bearin capacity to be 40 kg) G.I fasteners 100x 8 mm size for fixing frame to finished wall and necessry stainless steel screws etc. Profile frame & sash sall be mitred cut and fusion weled at al corners, including drilling of holes for fixong hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality. complete all as specified and directed by Engineer- in Charge complte all as specified and directed. Note -1. Glazed shutters float glass thickness not less than 5.00 mm and wiremes shutter with Stainless steel wire mesh 0.36 mm dia with aparture 1.4 mm shall also be deemed included in quoted rates and No extra payment will be made separately. 2. for UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F casement window and ventilators with net and grill single or multi shutters turn window and made out of upvc multi-cavity frame sections of 60x60x2.5mm suitable reinforced and double multi shutters division are made by using shash mullion having 50x64x2.5mm multi cavity upvc section ,suitable and reinforced and GI and shutters are made out of 50x85x2.5mm upvc section,reinforced and welded in corner with EDPM gasket provision for glass and for air tightat frames and outer side of shutter with single glazed window and adjusting suitable glass bead with perfect hardware like hinges,handles,stays etc complete mosquito mesh shutters is made out of UPVC extuded section of 61x27x2mm with GI channel of 1.20mm thick welded in corner mosquito net of GI is fitted in shutters with proper required accessarry like,hinge MS grill of 12mm round pipe are insertedin main frame and inserted in main frame and screw by hidden screwing system with powder coating etc complete all as specified and directed.Note:Glazed shutters glass thickness not less than 3.00mm and wire mess shutters with SS wire mesh as approved by Engr-in-Charge is also included no payment will be seperately.
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete of size 105mmx 60mm complete all as specified and directed.
S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete of size 125 X 60 mm complete all as specified and directed.
M&L for PCC 1:2:4 Type B0 ( 12.5 mm graded crushed stone aggregate) in filling under pressed steel door frame,lintel upto 1.5m clear span,cill, steps,seismic and other similiar bands, plinth courses,string courses, laacing courses parapets and railings upto 60 cm in height, bed plates, copings, kerbs, etc. water troughs and the like includind weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.
M&L for preparation painting new steel surfaces of any description over 10cm width or girth not other wise described with two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed .
S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commericial type on both sides complete all as specified and directed.
S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamferd or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.24(a), etc complete all as directed by Engineer-in-charge.
S&F factory made single extruded WPC (WOOD POLYMER COMPOSITE) solid door/window/ceosetory window and other frame/chowkhat of size 50x100mm comprising of virgin PVC polymer of K value 58 to 60 (suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified and directed.
M&L for providing and fixing factory made single extruded WPC wod polymer composite and decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 suspension grade calcium carbonate and natural fibre (wood powder/rice husk/wheat husk and non toxic additives (maximum toxicity index of 12 for 100 grms complete all as specified and directed.
S&F for 300mm long brass ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
S&F 100mm long butt hinges cast brass with mild steel hinge pin, bright polished and fixed type B-11 complete all as specified and directed.
S&F brass barrel tower bolts 200 mm of extruded section and fixed complete all as specified and directed.
S&F 125 mm long extruded brass handles fabricated type polished complete all as specified and directed.
S&F brass sliding door bolt 250mm long with sand or die cast brass hasp, staple (bolt type) and fixing bolts with rolled or drawn brass bolts and fixed complete all as specified and directed.
S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete fixed in repair complete all as specified and directed.
M&L for preparation of new wood surface and applying two coat of synthetic enamel paint over a coat of pink primer on wood/ plywood based surface of over 10cm width or girth complete all as specified and directed.
Dismantling of PVC water storage tank exc 250 and not exc 500 ltrs capacity and removing to store complete all as specified and directed.
S&F 500 ltrs capacity Rotational moulded polythene water storage tanks in three layers (cylindrical vertical with close top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.
S&F as in repairs 20/25mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwedfor iron pipe fixed complete all as specified and directed.
S&F Gun-metal,globe or gate valves with iron wheel head,screwed both ends for iron pipes for 20mm bore of pipe complete all as specified and directed.
S&F in repairs 25 mm dia stainless steel curtain rods with decorative end knobs and brackets complete all as spcified and directed.
Demolition of brick work built in cement mortar incl all quoins, arches pillars etc but excluding ashlar facings etc complete all as specified and directed.
M&L for brick work with sub class 'B' bricks,straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and directed.
Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position complete all as specified and directed.
M&L for RCC (1:2:4) type B-1 (nominal mix) using 20mm graded crushed stone aggregate as in roof slab supported on walls, beams and columns, in floors, roofs, landings, balconies etc and in shelves and the like complete all as specified and directed.
Use & waste of form work for fair finished flat surface to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and directed.
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape, required, including cranking, bending sprially for hoping for cols, hooking ends and binding with MS and including wire (annealed) not less than 0.9mm dia complete all as specified and directed.
S&F 6-8 mm dia and over TMT bar for reinforcement, cut to length, bent to shape required including cracking bending booking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 15 mm dia complete all as specified and directed.
Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store 20 mm dia complete all as specified and directed.
S&F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.
S&F 20 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors complete all as specified and directed.
S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary,gusset plates, riveting, etc.. n exc kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.
M&L for preparation of new plaster of wall and applying two coats of oil bound distemper over chalk whiting primer on plaster surfaces complete all as specified and directed.
M&L for prepararion of new plastered surfaces of wall and applying two coats of weather coats over a coat of exterior grade primer complete all as specified and directed.
S&F 18 mm thick PVC sheet minimum 600 Kg density grade 1 quality of both side plain white colour rigid and glossy finish fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet/ cupboard sides, top and bottom and shelves inside complete all as specified and directed. Note:- Kitchen cabinet/cupboard accessories like handle, hinges etc will be measured and paid separately.
S&F 18 mm thick PVC sheet minimum 600 Kg density grade 1 quality one side decorative lamination and other side plain white colour to make kitchen cabinet/drawer/cupboard shutters fixed with screws, solvent cement/adhesive as per manufacturer instructions to make kitchen cabinet sides, top and bottom and shelves inside complete all as specified and directed. Note:- (a) Kitchen cabinet accessories like handle, hinges etc will be measured and paid separately. (b) Colour and design of prelaminated board shall be approved by Engr-in-Charge
S&F auto closing hydraulic (soft closing) chrome finish stainless steel hinge openable at 110 degree complete all as specified and directed.
S&F 100 mm long stainless steel (grades-304) handle fancy type polished bright chrome finish complete all as specified and directed.
Dismantling of stone slab and tiles laid on dry of any description or thickness in floors, aprons etc complete all as specified and directed.
Excavating in post holes (or similar holes) each n.exc 0.5cum,getting out soft/loose soil returning in and ramming earth or broken earth or broken rubble mixed with earth around ,in layers n exc 25cm watering and removing surplus soil to a distence n exc 50 mtr and getting good surface complete all as specified and directed.
M&L for granite 20mm thick of any type work table rubbed and polished in steps ,jambs,pillars,window cills,cooking plateformsand like in cement morter (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
S&F in repair looking mirror 5 to 6 mm thick fixed on 8mm thick commercial decorative water proofing ply wood with coloured PVC frame all around and hook (shade as approved by GE) complete all as specified and directed.
M&L for along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.
Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.
S&F in repair stainless steel kitchen sink with drainage board of over all size 915 mm X 460 mm and bowl size 410 mm X 330 mm X 160 mm, 1 mm thick with plug washers and wastes ; including bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe complete all as specified and directed.
S&F 1 mm thick stainless steel kitchen plate rack 750 x 900 mm of fixed in repair all as specified and as directed. Make-Blue star or equivalent as approved by GE.
Dismantling/demolition of breaking up drain pipes of and 100mm dia PVC (SWR),salt glazed ware ,AC pipes set in cement morter or clamps in floor,wall etc complete all as specified and directed.
All as per item No. 71.00 but 75mm bore complete all as specified and directed.
S&F 110mm bore PVC (SWR) rain water,soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.
S&F in repair 110mm bore PVC (SWR) bends any radius complete all as specified and directed.
S&F 75mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/floor complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends any radius complete all as specified and directed.
M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit writing etc and making good, cutting not exc 10cm girth complete all as specified and directed.
M&L in repairs, 75mm dia PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete as specified and directed.
M&L for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded crushed stone aggregate as in sub-base of floors, plinth protection finished the surface of concrete fair and even complete all as specified and directed.
S&F chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165 ® complete all as specified and directed.
M&L for preparation of old surfaces by complete removal of existing treatment and applying two coats of weather coats exterior emulsion paints over a coat of exterior grade water proof wall care putty 2-3 mm thick and a coat of primer complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over 1mm thick wall care putty on internal wall surfaces complete all as specified and directed.
S&F counter top Basin size ; 610mmx415mmx160mm complete all as specified and directed. Make:- Jaquar-model-D' ARC Cat No-DRS-WHT-37601 or equivalent as approved by GE.
S&F floor mounted coupled with UF soft close slim seat cover, hinges, fixing Accessories and accessories Set size 380X655X765MM S trap-250mm complete all as specified and directed.
S&F in repair toilet paper holder with flap complete all as specified and directed. Make :- Jaguar cat part No. CAN-1153S or equivalent as approved by GE.
S&F in repair soap dispenser with glass bottle complete all as specified and directed. Make-Jaquar Cat part No. ACN-1135N or equivalent as approved by GE.
S&F in repair soap dish holder complete all as specified and directed. Make-Jaquar Cat part No. ACN-1131N or equivalent as approved by GE.
S&F in repairs CP brass center hole mixer for wash basin for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. Make:- Jaquar cat Part No: FUS-29023B or equivalent as approved by GE.
S&F in repairs bib taps (wall flange), fancy type, cast copper alloy with capastan head, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore pipe complete all as specified and directed. Make:- Jaquar cat Part No-FUS 29037 or or equivalent as approved by GE.
S&F in repairs two way bib cock (wall flange), fancy type, cast copper alloy with capastan head, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore pipe complete all as specified and directed. Make :- Jaquar cat Part No-FUS 29041 or equivalent as approved by GE.
S&F in repairs chromium plated fancy type angle valve for 15 mm bore size complete all as specified and directed. Make :- Jaquar cat part No-FUS 29053 or equivalent as approved by GE.
S&F in repair hand shower (health faucet) with 8 mm dia, 1 mtr long flexible long tube & wall hook complete all as specified and diretced. Make:- Jaquar cat part no.- ALD-573 or equivalent as approved by GE.
S&F in repair towel Rack 600 mm long with lower hangers stainless steel complete all as specified and directed. Make:- Jaquar cat part no.ACN-1181S or equivalent as approved by GE.
S&F in repair towel ring square complete all as specified and directed. Make:- Jaquar cat Part No. ACN 1121N or equivalent as approved by GE.
S&F in repair corner glass shelf with bracket complete all as specified and directed. Make:- Jaquar cat part No.ACN-1173 or equivalent as approved by GE.
S&F in repair glass shelf 600 long complete all as specified and directed. Make :- Jaquar cat part no. CAN 1171N or equivalent as approved by GE.
S&F in repair tumbler holder complete all as specified and directed. Make:- Jaquar cat part no. ACN-1141N or equivalent as approved by GE.
S&F in repair double arm wall mounted reverseable plain /magnifine mirror complete all as specified and directed. Make- Jaquar cat part no. ACN-1193N or equivalent as approved by GE.
S&F in repair braided hose connections 15mm size with nuts and length 600 mm complete all as specified and directed. Make:- Jaquar cat part no. ALD-801B or equivalent as approved by GE.
S&F decorative POP cornies of sectional area 30 to 50 sqcm complete all as specified and directed.
M&L for rendering 5mm thick cement plaster on ceiling surfaces on brick or concrete surfaces in CM (1:3) with 1mm thick wall care putty complete all as specified and directed.
M&L for prepararion of new plastered surfaces of wall and applying two coats of cement base paints over a coat of cement primer complete all as specified and directed.
M&L for PCC (1:4:8), type D-2 (using 40mm graded stone aggregate) as in sub base 75mm thick complete all as specified and directed.
M&L for 60 mm thk PCC M-35 machine pressed rubber moulded coloured interlocking pavor block any shape and size confirming to IS 15658-2006 using white cement with lakour finish complete all as specified and directed.
M&L for sand cushion for paver block complete all as specified and directed.
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soil and loose soil complete all as specified and directed.
M&L for providing precast cement concrete 1;2:4 type BO louvres and jallies, 25mm thick (measured solid), including all mould- ings ,set in CM 1:4 complete all as specified and directed.
Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation poles, stays or for taking out/laying of cables and getting out in soft/loose soil complete as specified and directed.
Removing excavated material (soils) to a distance not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.
Returning filling soft/ loose soil including spreading, levelling, watering and well ramming in layer not exceeding 25mm thick complete all as specified and directed.
M&L for hard core broken stone boulder of gauge n.exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered rammed true a surface complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in filling and mass concrete complete all as specified and directed.
M&L for providing precast cement concrete 1:2; 4 type B1 in window or door cills, lintels, bressumers, steps,quoin blocks (for use with masonry), stringcourses, copings.kneelers, apex stones, pier caps, columns, posts,boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets, etc. (of any section indicated), with plain fair faces,including chamfers, weatherings, throating etc. and setting in mortar 1:4 complete with joints to match complete all as specified and directed.
S&F framed shower encloseres corner entry half rounded encloser size -H-1950mm,W-1200mmx1200mm with curved sliding doors 6mm thick glasss and finished crome complete all as specified and directed. Make: - Jaquar model-Delta Cat No-JSE-CHR-DEL 1212X or equivalent as approved by GE.
S&F shower panel Jaq Brushed stainless steel size 1400x200mm complete all as specified and directed. Make:- Jaquar model-jaq Brushed S S with Cat No-JPL-SSF-ST8858B3 or equivalent as approved by GE.
Taking down carefully copper / aluminium point wiring (light, fan, call bell, two way, socket or power) complete with fittingS&Fixtures such as switches, ceiling roses, pendants, regulators, tube fittings and other kitS&Fittings, removing unserviceable materials from work site and making good disturbed portion / surface of wall/ floor/ ceiling etc by using cement mortar (1:4) including white / colour wash / distempering etc as required to match with the existing surfaces / location complete all as specified and as directed.
M&L for new concealed type point wiring with PVC insulated PVC unsheathed electric (FRLS) cable of size 1.5 Sqmm nominal cross sectional area, 1100 Volt grade, single core having multi stranded copper conductor with 1.5 Sqmm green colour PVC insulated unsheathed electric (FRLS) cable having multistranded copper conductor as earth wire connected to earth dolly by providing lugs including metal modular sunken box with modular cover plate frame of suitable size, drawn through and including non metallic rigid PVC conduit (ISI marked) medium grade not less than 20mm dia with all conduit accessories in concealed wiring system including cutting chases in wall and making good in cement mortar (1:4) with all necessary surface finishes such as white / colour wash / distempering etc to match the existing surfaces complete all as specified for the following:-
All as per Srl item No. 117.00 above but for one light/fan point controlled by one, one way switch.
All as per Srl item No. 117.00 but for one bell point controlled by one bell push complete all as specified and as directed.
All as per Srl item No. 117.00 but for One socket outlet point 6 A on same board.
All as per Srl item No. 117.00 but for one socket outlet point 6 Amps on independent board
All as per Srl Item No. 117.00 here in before but concealed point wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for 16 Amps power socket point controlled by one, one way 16 Amps modular switch on independent board complete all as specified and directed.
All as per Srl Item No. 117.00 here in before but concealed point wiring with 4.0 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable and 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed (FRLSH) cable, green colour as earth continuity wire for one AC socket point on independent board complete all as specified and directed.
S&F Modular Switch 1 way, 6A, 1 module as per existing complete all as specified and as directed by Engineer-in-charge.
S&F modular type white colour bell push 6 Amps, 230 Volts in 1 modules complete all as specified and as directed.
S&F modular type white colour shuttered socket 16 Amps 2/3 pin combined, 230 Volts in 2 modules complete all as specified and as directed.
S&F modular type white colour shuttered socket 6 Amps 2/3 pin combined, 230 Volts in 2 modules complete all as specified and as directed.
S&F modular type white colour shuttered socket 16 Amps 2/3 pin combined, 230 Volts in 2 modules complete complete all as specified and as directed.
M&L for ceiling rose in polycarbonate 3 terminal brass flush type 6 Amps, 250 Volts, AC supply (ISI marked), fixed on & including 3 mm thick 75mm dia sunmica hylum plastic laminated round sheet complete all as specified and directed.
S&F modular stepped type energy saving electronic fan regulator white colour 120 Watt, AC 230 Volts suitable for 2 modules including connecting complete all as specified and as directed.
S&F in replacement, bell/buzzer Ding Dong type AC 230 Volts complete all as specified and directed.
Taking down Old unserviceable sub main wiring any size complete all as specified and as directed.
M&L for sub main wiring with two run of 6.0 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6.0 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB complete all as specified and as directed.
M&L for sub main wiring with two run of 4.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC concealed conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 4 Sqmm green in colour as earth continuity conductor connected to common earth dolly for main DB to Sub DB and AC complete all as specified and as directed.
Taking down unserviceable main switch, DB’s insulators, DB for MCB and board etc. of any type and any capacity and further disposal including making good the disturbed surface and matching the colour of wall with the existing colour wash/ paint/ distemper wherever required complete all as specified and as directed.
S&F epoxy powder coated MCB, DB, double door SPN 12 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall all as directed.
S&F in proper position MCB Triple Pole & Neutral of capacity 63 amps, 240 Volts C-series with 10kA breaking capacity complete all as specified and as directed.
S&F MCB SP 40 Amps, 230 Volts C curve 10 KA, including necessary connection complete all as specified and as directed.
S & F MCB SPN 32 Amps, 230 Volts 'c' curve10 KA, including necessary connection complete all as specified and as directed.
Supply and fixing MCB Single Pole (SP) C curve 10kA breaking capacity of 6 to 32 amps, 240 Volts in proper position complete all as specified and as directed.
Taking down unserviceable LED Light fitting complete all as specified and as directed.
Supply and fixing round shape 15 watt 220 volts Warm/White AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete all as specified and directed.
S&F in replacement, LED tube light fitting,1X20 Watt surface and wall mounted decorative ultra slim square profile with extruded polycarbonate, environmental friendly, energy efficient ready to use pack fitting including connection with & provn of twin core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.core multi stranded copper cable of size 1.5 Sqmm from ceiling rose to tube light fitting complete all as specified and directed.
Supply and fixing Warm/White LED wall mounted light with single swing arm for mirror of suitable size including all mounting hardware high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fixing LED bldg security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including hermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.
Supply and fix electric water heater,storage type with stainless steel body inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed.
Supply & fix Wall mounted fans, 230 volts, single phase oscillating 400 mm sweep suitable for wall mounting complete all as specified and directed.
Supply and fixing Motion sensor B22 LED Bulb 9 watt 220 V AC complete all as specified and directed.
Supply & Fixing Modular AC Box With 20A SP MCB,Plastic Enclosure & Unbreakable Heavy Duty With ISI AC Plug Top for AC all as specified and directed Cat No:-98489. Make :-Anchor/ Havells/Bajaj or equivalent specified make.
Taking down ACSR Conductor of any Type any size complete all as specified and directed.
M&L for sand cushioning to underground cable with clean dry river sand complete all as specified and directed by Engrineer-in-Charge. Note:- Punned thickness only shall be measured & Paid.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.
Supply & Laying of sub class 'B' bricks locally available best quality laid flat (length of bricks laid across the length of cable) in tranches for protection of U/G cable complete all as specified and directed by Engineer-in-Charge.
Supply and fixing ceiling fans design blades, 230 V, 1200mm sweep, Air delivery 240 CMM , 5-Star Rated Remote-Controlled Silent Ceiling Fan with ActivBLDC Technology to Save Energy complete all as specified and directed
Supply and fixing Decorative, surface mounting, dome shaped pendant in green & black finishes with LED Filament lamp 4 W T32 2C Type B22 CLEAR complete all as specified and directed.
Supply and fix bed side antique type decorative of metal base with LED lamp upto 15 watt complete all as specified and directed.
M&L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate not less than 1.50 m below ground level, connected to GI lead wire of 4 mm dia. (7.50 m long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 1.5 mm nominal bore (7.50 m Long) for earth plead wire, watering pipe light grade of 20 mm nominal bore, 0.63 mm thick CI funnel, wire mesh etc complete including necessary earth work and excavation in any type of soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified.Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified.
DEORA ELECTRIC WORKS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .