DEMOLITION AND RECONSTRUCTION OF BLDG NO P-322 (MT SHED) OF INF BN NO 2 AND SPECIAL REPAIR OF SEEPAGE BATHROOM OF LIVING BARRACK (BLDG NO P-164A) OF BDE CAMP AT BRICHGUNJ MIL STN PORTBLAIR.

Amount

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge

Demolition of reinforced roof slabs, beams, staircases, landing, chajjas and similar suspended work complete all as specified and as directed by Engineer-in-Charge

Demolition of concrete in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer-in-Charge

Demolition of precast concrete block walling built in cement mortar complete all as specified and as directed by Engineer-in-Charge

Separating, scraping and cleaning of reinforcement (Demolition of concrete measured separately)

Taking down chowkats or frames with shutters area n.exc 1.5 Sqm each(without taking off shutters from the frame) all as specified and as directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc and n.exc 10sqm on plan and n.exc 1.5m in depth and getting out

Returning, filling in Hard/dense soil and back filling of retaining wall, including spreading, levelling, watering and well ramming in layers n.exc. 25cm all as specified.

Removal of excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point.

M & L for PCC 1:4:8 Type D2 (40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge

M&L for formwork to sides of concrete foundation, footings, bases or columns, raft and faft beams, sides and soffits of fdn and plinth beams and similar work vertical or batter all as specified and directed by Engr in Charge

M&L for RCC M-30 (20mm graded aggragate) in foundation complete all as specified and as directed by Engineer-in-Charge

M&L for formwork to sides of sides pillars, posts, struts, piers, colulmns and stanchions all as specified and directed by Engr in Charge

M&L for RCC M-30 (20mm graded aggragate) in Columns, pillars, piers, kposts and struts complete all as specified and as directed by Engineer-in-Charge

M&L for formwork to sides of sides and soffits of floor or roof beams, lintel bands etc all as specified and directed by Engr in Charge

M&L for RCC M-30 (20mm graded aggragate) in Beams, lintels over 1.5m span complete all as specified and as directed by Engineer-in-Charge

M & L for Pre-cast PCC block masonry type B-1 (1:2:4) with solid block and set in CM1:6 complete all as specified and as directed by Engineer-in-Charge

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge

S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe-410-W(Gde-E-250) quality-B complete all as specified and as directed by Engineer-in-Charge

S&F mild steel flat iron 40 x 3mm as in wind tie including all necessary drilling, bolting or riveting etc., confirming to Fe 290 complete all as specified and as directed by Engineer-in-Charge

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe 410-W, Gde-E250, Quality-A) complete all as specified and as directed by Engineer-in-Charge

M/L for two coats of synthetic enamel painting over a coat of red oxide zinc chrome primer incl preparation of new or previously untreated steel surfaces of any description over 10cm width or girth complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel bolts exc 12mm nexc 20mm dia , purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long complete all as specified and as directed by Engineer-in-Charge

S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls for rain water pipe

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI baesd plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F as in aluminium anodised snap grid frame work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle for false ceiling and suspended with 6mm dia GI wire, hooked to roof with needful adjustement up to 1200mm long by means of ceiling cleats made out of GI Flat 40 X 3mm 60mm long and expansion holdfasteners 12.5mm dia 40mm long, including dismantling celing board of any description and any type fixed to the aluminium frame work with screws or nails etc complete all as specified and as directed by Engineer -in-Charge.

Fixing only Eco board 600 X 600 X 4mm thick decorative type fixed to the aluminium frame work with screws or nails etc including two coats of oil bound distemper over a coat of primer complete all as specified and as directed by Engineer -in-Charge. Note :- Eco Boards obtained from dismantling to be re-used.

S & F Aluminium powdre coated (minimum thickness of powder coating 50 micron) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement etc, complete with standard aluminium sections, all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.

Supply only aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed by Engineer-in-charge.

M&L for PCC 1:3:6, type C2, (Using 40 mm graded stone aggregate), 150 mm thick as in plinth protection/Sub base flooring, finishing surface fair and even, in panels & filling joints with mortar, etc., complete all as specified and directed.

M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips omplete all as specified and as directed by Engineer-in-Charge

All as per serial item no 35.00 here -in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders omplete all as specified and as directed by Engineer-in-Charge

S & F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, but gear operated type with bevel gear box and crank handle omplete all as specified and as directed by Engineer-in-Charge

M & L for two coats of oil bound distemper over on coat of alkali resistant primer including preparation of newly plastered surfaces of wall complete all as specified and as directed

M & L for two coats of wheather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered surfaces of wall including preparation of surface etc complete all as specified and as directed by Engr-in-Charge

Dismantling any type of Floor or Wall tiling including cement mortar bedding (but not backing) and Removing Rubbish out side of the MD Land all as directed by Engineer-in-Charge.

Demolition of Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-in-Charge

Taking down chowkats or frames exceeding exc 1.5sqm but n exc 4 sqm each (Without taking off shutters & Grill from the frame) complete all as specified and as directed by Engineer-in-Charge

Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out side of the MD Land all as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 15mm dia bore, GI tubing, medium grade, including cleaning for refixing or removing from site, complete all as specified and as directed by Engineer-in-Charge.

M&L 25mm thick cement concrete type B-0 (12.5mm graded stone aggregate) as in RCC roof / Floor surface for level coarse complete all as specified and as directed by Engr-in-Charge

M&L for 20mm thick Granite of any type work table rubbed and polished in steps, jambs , pillars, cooking platforms and the like including pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including Screed bed of coat 20mm thick CM (1:4) complete all as specified and as directed by Engr-in-Charge

M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L Glazed ceramic coloured joint free tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over Screed bed or bedding layer of mortar 10 mm thick in Cement mortor 1:3 for laying floor finishes all as specified.

M & L for rendering 5 mm thick in CM I:3 on for ceiling surfaces, finished even and smooth without using extra cement etc complete.

M & L for rendering 15 mm thick in CM I:4 over backing coat of 10 mm thick in CM 1:6, finished even and smooth without using extra cement etc complete. (Note : WPC shall be measured and paid seperately)

M & L for removing loose and broken concrete by chiseling / picking etc upto a depth of 80 to 100mm from columns, beams and similar structural members, cutting edges, clearing the dismantled portion with wire brushes etc., to remove dust, dirt and other foreign particles etc., and washing with clean water with pressure including necessary scaffolding and removal of debris to a distance n.exc 50m, complete all as specified and as directed by Engineer-in-Charge.

M&L for non shrink, cementitous micro concrete mixed with 12.5mm graded stone aggregate using Renderoc RG or equivalent by weight (18 Kg Aggregate :25 Kg Renderoc RG) respectively (as per manufatures instruction) laid in average thickness 80 to 100 mm in surface of columns, beams, parapets and similar structural members including use and waste of water tight form work, complete all as specificed and as per directed by Engineer-in-Charge.

M&L for applying one coat epoxy bonding agent @ 2.6 sqm/lit or as per manufactures instruction to old concrete surfaces of columns, beams and similar structural members complete all as specified and as per directed by Engineer-in-Charge. Make Nitobond EP of Fosroc or equivalent

M&L for preparation of new plastered surface or unplastered surfaces of walls and cornices complete applying two coats of oil bound distemper over a coat of primer on walls all as specified.

All as per serial item no 55.00 here -in-before but on soffit of slab/ceiling.

Complete removal of existing treatment and preparing old surfaces for applying two coat of oil bound distemper on one coat of primer over a coat of primer and pytty on walls complete all as specified and directed.

All as per serial item no 57.00 here -in-before but on soffit of slab/ceiling.

M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima)

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and fix UPVC 25mm bore pipes of pressure rating 10 Kgf/Sqcm fixed with all fittings and fixed to walls and ceillings or laid in floors etc complete all as specified and as directed.

Supply and fix UPVC 20mm bore pipes of pressure rating 10 Kgf/Sqcm fixed with all fittings and fixed to walls and ceillings or laid in floors etc complete all as specified and as directed.

Cutting chases, pinning in , making good to facings for concealed water tubing and pointing in CM 1:3, cutting not exc 10 cm girth complete all as specified and directed.

S&F in repair Bib taps 15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed..

Supply and fix in repairs Health Faucet with 1m long PVC tube and wall hook complete all as specified and as directed

S&F in repairs Brass Chromium plated shower rose 125mm size, with swivel joint, fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws as directed.

S&F in repairs Aluminium anodised chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Vitreous China Wash down water closet pan pedastel pattern (EWC) white in colour with and incl plastic water seat and cover white closed pattern with flat bottom and cover and MS chromium plated hinging device incl connection to outgoing pipe and flushing pipe complete all as specified & directed by Engineer-in-charge.

S&F in repair vitreous china squatting pan orissa pattern of size 580x440mm white with integral foot rest and including connection to trap and to flushing pipe, anti syphonage pipe etc. complete including making good to floor complete all as specified and directed.

S&F in repairs vitreous China urinal, half stall type complete including waste pipe, flush pipe & providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement etc, and including connection to flushing pipe and outgoing pipes fixed in repairs complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets, 15mm dia PVC Connection & Flushing pipe all as specified & directed by Engineer-in-charge.

S&F in repairs wash hand basin oval type, vitreous china, of size 550x400mm fixed complete incl fixing the same in to granite slab complete including CP waist coupling , waste pipe, PVC Connection of twice on each WHB for Hot & cold all as specified and directed.

Supply and fix in repairs stainless steel gratings 125mm dia, complete all as specified and as directed

S&F in repair looking mirror Bevelled Edge 600mmx450mm mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by the Engineer -in- charge..

S&F in repair Glass corner shelf complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls heights up to 6M complete all as specified and as directed by Engr-in-Charge

S&F in Repair 75mm dia PVC (SWR) Multi Floor Trap with Grating including jointing with solvent cement complete all as specified and as directed by Engr-in-Charge

S&F in Repair 75mm dia PVC (SWR) bend with any radius complete all as specified and as directed by Engr-in-Charge

S&F in repair 75 mm dia PVC (SWR) branch piece (single Y)equal or unequal with oval access door complete all as specified and as directed by Engr-in-Charge

S&F in Repair 75mm dia PVC (SWR) Tee with single junction with any radius with wall access door complete all as specified and as directed by Engr-in-Charge

S&F in Repair 110mm dia PVC (SWR) bend with any radius complete all as specified and as directed by Engr-in-Charge

S&F in Repair 110mm dia PVC (SWR) Tee with single junction with any radius with wall access door complete all as specified and as directed by Engr-in-Charge

Material and labour for anodized aluminium sections (minimum anodisation 15 micros) for partitions, window and door with frame and shutters fully or partially glazed, side Hung type ( two numbers glazed and gauzed) without sash bars, with panel inserts of sheet glass, gauze including necessary jointing cleats, glazing clips, rubber beading, Neoprene packing, anodized aluminium snap beading, screws,i max hinges, butt hinges etc. The size of aluminium sections shall be all as specified in relevant IS code and SSR part-I and completed all as specified and as directed by engineer-in-charge. (Note: (i) supply only panel inserts of glass/gauze, handles, tower bolts and sliding bolt will be measured and paid separately as supply only. (ii) Weight of aluminium section only shall be accounted for payments purpose. However, until rate quoted shall be deemed to include for cost of rubber beading, glazing clips, neoprene packing and fixing only of panel inserts of glass/ particle board/gauze, handles, hinges, sliding bolts, tower bolts etc.)

Supply only 12 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination and fixed to aluminium frames complete all as specified and as directed by Engineer -in-Charge.

S&F Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing clips to sheet cast or extruded sections and fixing bolt or cast aluminium alloy complete all as specified.

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete all as specified.

S&F 100 mm long extruded aluminium alloy anodised handles fabricated type complete all as specified.

S&F 150mm long extruded aluminium alloy anodised handles fabricated type complete all as specified.

M&L for PCC 1:5:10 type E2 using 40mm graded stone aggregate as in mass concrete in sunken slab treatment complete all as specified and as directed by Engr-in-Charge

M&L for water proofing treatment to sunken surfaces of the slab in following sequences:- (a) Slope correction by using 1:2:4 (Nominal Mix) concrete minimum 25mm thickness at one end and a slope of 1:20 by using 12.5 mm graded stone aggregate with integral water proofing Chemical PIDI PROOF-LW mixed in proporation 200ml /50 Kg cement of DR Fixit of Pidilite Industries Ltd or STP No 1 (liquid) of STP Ltd in proporation 200ml / 50 Kg cement or equivalent as per manufacturer instructions complete.

(b) PCC padding with cement concrete 1:1.5: 3 type A 0 (using 12.5 mm graded stone aggregate) 25mm thick with integral water proofing compound "Dr Fixit" manufactured by M/S Bouchemic or equivalent as per manufacturer instructions complete.

(c) Vertical sides plastered in CM 1:3, 15mm thick with WPC and 72 hours testing for water tightness by ponding of water complete.(Note :- WPC Measured Separately)

(d) Application of two coats proof coats black manufactured by M/S Dr fixit or equivalent as per manufacturer instructions all over and testing again for water tightness by ponding of water for 72 hours complete.

Supply only Integral Water proofing Compound

M&L in repairs water proofing treatment to RCC roof by priming the plastered surfaces with a coat of cold applied bituminous primer conforming to IS 2488 @ 0.30 kg/sqm and laying APP modified five layer polymeric membrane 3mm thick of minimum wt. 3.50 kg/sqm reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) laid by torch application as per the manufacturers instructions with side overlap of 75mm & end overlap of 100mm & tucked into the chases on vertical surfaces to a height of 300mm & finally finished with bituminous aluminium paint @ 0.10 kg/sqm complete including taking down existing roof treatment all as specified and as directed.

M&L for 25 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and rendering 5 mm thick in one layers on concrete surface cement sand mortar 1:3 using water proofing compound @ 3% by weight of cement finished even fair and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note:WPC will be measured and paid separately.

S&F Rotational moulded polythylene water storage tanks 1000 ltr double layer (cylidrical verticial with closed top) including float valve hoisted and fixed in postion including removing /dismantling of old water tank

S&F Rotational moulded polythylene water storage tanks 2000 ltr double layer (cylidrical verticial with closed top) including float valve hoisted and fixed in postion including removing /dismantling of old water tank

Taking down carefully, copper/aluminium point wiring (Light, fan, scoket or power) complete, including fittings and fixtures such as switches, ceiling roses, sockets etc., and making good disturbed surfaces of walls floors, etc., complete all as specified and as directed by Engineer-in-Charge.

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC casing and caping and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, including fabricated steel terminal box made out of 1.60mm thick MS sheet concealed in walls, with 3mm thick laminated sheet top cover/Pre moulded PVC switch board for housing the switches, socket outlets, fan regulators etc., all as specified and as directed for the following: -(a) One light point controlled by one way switch

(b) One Exhaust fan point controlled by one way switch complete all as specified and as directed by Engr-in-Charge.

(c)One 3 pin switch socket outlet point 5 amps on same board with other switches complete all as specified and as directed by Engr-in-Charge

(d) One 3 pin switch socket outlet point 5 amps on independent board complete all as specified and as directed by Engr-in-Charge

All as per item at sl No.103.00 here in before but with copper conductor cable for one 3 pin socket outlet, 15 amps independent, with cable 4 Sqmm size and 4 Sqmm earth continuty conductor, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix switch socket outlet 3 & 2 pin (mult pin) 5 amps flush type, complete all as specified and as dircted by Engineer-in-Charge.

Supply and fix switch socket outlet, 2 in 1, 3 pin 15 and 5 amps, controlled by one switch flush/box type complete all as specified and as directed by Engineer-in-Charge.

Supply and fix of switch piano flush type single pole one way 5 Amp all as specified and directed.

Supply and fix ceiling rose surface baklite 65 x 50 mm 3 terminal, complete all as specfified and as directed by Engineer-in-Charge

Supply and fix energy efficient LED Smart bright batten 22 watt fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

Supply and fix exhaust fan suitable for on working of AC 230 V ,50 Hz 380 mm sweep 1400 RPM,with heavy duty motor ,incl louvers complete all as specified

Supply and fix in repair metal enclosure distribution board SPN, 4 way 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs complete all as as specified and as directed by Engineer-in-Charge

Supply and fix MCB single pole, 240 volts, 5 to 32 Amps, all as specified and as directed.

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.

Earthing with 600x600x6.3mm galvanised steel earth plate electrode buried vertically in ground (earth pit not less than 2.25 metre deep below normal ground level) with top edge of the plate at a depth of not less than 1.5m below ground level, connected to and including G.I. wire 4mm dia by means of bolts,nuts all as shown in electrical Plate No.3 connected to earthing test point all as specified or indicated including testing on completion.

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 2 Core 10 Sqmm.

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

Taking out and dismantling the burnt out old winding wire complete and cleaning the internal slots of rotor with ring and rewinding the exhaust fan of size 300mm sweep motor with super enamelled copper winding wire of suitable SWG including varnishing, baking in oven and reassemling refixing at same/ required location, complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repair metal enclosure distribution board SPN, 2 way 240 volts, suitable for mounting MCBs complete all as as specified and as directed by Engineer-in-Charge

Supply and fix MCB SPN 240 volts, 5 to 32 Amps, all as specified and as directed.

M & L in repairs for sub main wiring complete with two runs of 4 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including PVC Casing and caping and all accessories fixed to wall/ roofs/ floors etc with one run of 4 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit & one run of earth continuity conductor shall be measured as one running metre.

AMR TRADERS

M/s.Tarun Construction

T.THIYAGARAJAN

NAVJEEVAN ENTERPRISES

M/S SHAJAHAN BUILDERS

S.K.ENTERPRISES

M/s S U Enterprises