Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.2 LAccepted-AOC | L1 | Accepted-AOC Due to lowest | |
| 2 | L2₹17.6 L+₹20,068.50 (1.15%)Rejected-Finance VPO BURJ HARI SINGH TEH RAIKOT DISTT LUDHIANA PIN 141109 PB | RAIKOT | LUDHIANA | PUNJAB | 141109 | L2 | Rejected-Finance Due to other than lowest | |
| 3 | L3₹18.2 L+₹74,778.50 (4.29%)Rejected-Finance H NO 963 10 STREET NO 5 DEEP NAGAR CIVIL LINES LUDHIANA 141001 PUNJAB | LUDHIANA | LUDHIANA | PUNJAB | 141001 | L3 | Rejected-Finance Due to other than lowest | |
| 4 | L4₹20.0 L+₹2.6 L (14.8%)Rejected-Finance MANDIR ROAD NEW ABADI AKALGARH AIR FORCE STATION HALWARA TEH RAIKOT DISTT LUDHIANA PB 141106 | LUDHIANA | LUDHIANA | PUNJAB | 141106 | L4 | Rejected-Finance Due to other than lowest |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
27 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Ludhiana
Garrison Engineer Military Engineer Services Near Jagraon Bridge Ludhiana-141001
REPAIR/MAINT TO CERTAIN BUILDINGS IN BADDOWAL AND MOGA UNDER AGE B/R BADDOWAL, GE LUDHIANA
2022_MES_566205_1
GE/LDH-61/2022-23
Open Tender
Civil Works
Item Rate
270 days
Baddowal and Moga
As per NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE Ludhiana
₹40,000
Yes
2 Feb 2023
30 Nov 2022
28 Dec 2022
30 Nov 2022
27 Dec 2022
14 Dec 2022
30 Nov 2022 - 13 Dec 2022
Amount
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above gd level). complete all as specified and directed.
Dismantling brick tiles or terracing tiles, single layers on roof padding all as specified.
Demolition mud phuska in roofs any thickness incl platering and leeping(whether full thickness removed or only a part thereof) complete all as specified.
M&L for applying evenly a bitumen tack coat of industrial bitumen 85/25 @ 1.2 kgs/Sqm incl cleaning surfaces complete all as specified.
M&L for rendering 10mm thick on roof surface in cement mortar (1:3) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-charge. (Supply only of water proofing compound shall be measured and paid for separately under appropriate item of this Schedule).
M&L for providing APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150gms/Sqm) land on primed surfaces by forced application APP based polymeric membrance complete all as specified and directed by Engineer-in-Charge.
M&L for Plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate average thickness 50mm as in roof padding incl mixing water proofing compound (Dr. Fixit) or equivalent make specified in Appx 'B' as per manufacturers instruction complete all as specified and as directed. Note. water proofing Compound shall be measured and paid seperately)
M&L for 40 mm thick brick tiles laid on concrete surface and joints grouted flush in cement mortar ( 1:3 ) mixed with 5% of crude oil by weight of cement complete all as spd and directed.
All as per item no 08 above but except tile all as specified.
Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish
Supply only Integral water proofing compound.
M&L for PCC 1:2:4 type B-1 ( using 20 mm graded crushed stone aggregates) Providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specfied and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing from outside the premises all as specified.
M&L for vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick bedding layer in cement mortar (1:6) all as specified.
All as per item No 14 but on vetrified surface, skirting over and including 10mm thick rendering in cement mortar 1:4 all as specified.
M&L for machine cut kota stone slab flooring 18-20 mm thick laid on screed bed 15 mm thick in cm (1:6) and jointed with greay cement slurry mixed with pigment to match the shade of slab including laying, cutting, rubbing and polishing complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 Type B-1 using 20mm graded stone aggregate as in sub base including necessary form work complete all as specified and directed by Engineer-in-Charge.
Dismantling water tanks of capacity 250 to 500 ltr and removing to store.
Dismantling water tanks of capacity 500 to 1000 ltr and removing to store.
S & F for rotational moulded polyethylene water storage tanks triple layered of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position including nipple suitable for water tank.
S&F for rotational moulded polyethylene water storage tanks triple layered of capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position including nipple suitable for water tank.
Dismantling of existing asbestos cement corrugated or semi corrugated sheets in roof, walls etc complete all as specified and directed by Engineer-in-Charge.
S&F for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or J or L type hook as required and as specified.
S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
M &L for 75 mm thick PCC 1:3:6 mix type C2 as in plinth protection and paving finishing cone surface even and smooth without using extra cement all as specified and directed.
M&L for machine pressed precast concrete interlocking paver block coloured made with grey cement with pigment glossy finish made with white cement any shape and size 60 mm thick confirming to IS 15658-2006 of M-35 grade complete all as specified and directed.
M&L for 40 mm thick sand cushioning under floors or in fdn complete all as spd and directed.
M&L for 50 mm thick PCC 1:4:8 type D-2 (with using 40mm graded stone aggregate) as in sub base of floor complete all as specfied and directed.
M/S Satguru enterprises
ANUJ ABROL CONTRACTOR
Kular and Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .