Shifting and ITC of Split A/c units and accessories from Gijhore to Chitti, Maharshi nagar and Rewinding of DG set in Kakod2 in Noida.

SH-I -ITC of SACs- Jewar, Maharashi nagar I.T.C of 1.5 TR split type A/C unit i/c brazing / welding of refrigeration pipe between indoor & outdoor unit making suitable hole in the wall for crossing of refrigerant pipe a/w control cable and drain pipe with core cutting machine / hammer machine, sealing the same and making good the damage, leak test etc complete as required.

Supply & Fixing of copper refrigerant pipe lines i.e suction and discharge copper pipe length for split A/C unit of i/c foam insulation etc. complete as required.

Supply & fixing of 19 mm dia heavy duty flexible thread Pipe i/c accessories from unit to suitable distance for drain etc complete as required

Supplying and drawing 3 core 2.5 Sqmm multi core copper conductor PVC insulated FR Power cable for electrical connection etc. as reqd.

Charging of refrigerant Gas R-22 in the existing split AC units i/c Supplying vaccmization and also pressure testing with nitrogen etc. complete with connections, testing and commissioning etc. as required.

SITC of 400 mm Sweep oscillating type cabin fan suitable for operation on 230 volts 50 Hz. A.C. supply complete with accessories etc (M/s Havells/Crompton/Khaitan make)

S/F of electrical board for computer of following electrical accessories, connection etc as required (a) Switch 5A

Socket 3 pin 5A

PVC gang box for 4 switch & 4 socket

PVC gang box for 2 switch & 2 socket (In chamber of DGM(A&P)

SITC of Exhaust Fan 300mm sweep, 1350 rpm, 230V A.C. supply complete with accessorie Iin exsiting opening etc (M/s Havells- Ventil Air DSP /Bajaj/ Surya,/Khaitan make)

Making opening in brick wall i/c breaking the wall and plastering etc

SITC of Ceiling fans 1200mm sweep 2 star rating complete with all accessories etc. as required. (M/s Havells- ES NEO or ES Plus or similar superior make)

S/F Fan hook in CC roof, digging & making good the damage etc

[SH-II- Tin Shade for DG set in Sect 71] Providing Tin shade made out of following M.S Pipe and G.I sheet, Cutting, Welding and grouting etc (a) PP G.I Sheet PCS - 3.5 feet x 10 feet (Fixing with nuts & bolt, washers) etc

M.S. Pipe- 2inch x 2 inch size i/c primer & painting etc

8 mm thick MS Plate 6inch x 6 inch size with 04 nos fastners for grouting etc.

Providing & fixing GI sheet 30 gauge size 4feet x 8 feet on roof of canopy of 15 KVA DG set in sect 71 i/c screws, cutting, bending etc.

Painting of outer side of canopy i/c removing dust, red oxide and painting with good quality of paint etc

S/F PVC tansparant Sheet in doors in DG set etc

[SHI-III- Rewinding of 15 KVA DG set at Kakod2] Servicing of existing 15 KVA E/A set i/c replacement of consumables such as lube oil, lube oil filter, diesel filters & air filters etc. complete as required.

Rewinding of 15 KVA Alternator i/c warnshing,dismentalling from its position, Transporation of Alternator from site to workshop at Ghaziabad and back to site, re fixing the alternator, alignment, testing etc etc

S/F AVR Unit in DG set ,connection ,testing etc

SH-IV (Work at Gijhore & Chitti BTS ) Dismantling of following electrical accessories i/c loading - unloading etc. complete as required. .(a) L.T. Panel ( Size-1.7mx1.1mx0.3m )- 01 no, (b) TP MCB DB 4 Way- 01 no ( c) Main Switch 125A 415v- 01 no (d)LT cable (e)Split AC ( Voltas) --03 Nos

Shifting of following electrical accessories from Gijhore to Chitti BTS i/c loading - unloading with specialize man power & Hydraulic Crane etc. complete as required.(a) L.T. Panel ( Size-1.7m x 1.1m x0.3 m )- 01 No, (b) TP MCB DB 4 Way- 01 no ( c) Main Switch 125A 415v- 01 no (d) LT cable Note-- Staircase is narrow so Panel shall be lifting by Crane. In Chitti, crane/ heavy labour shall be used as BTS is down from road .

Transportation of 03 nos Split AC Unit 1.5 TR from Gijhore Ist Floor to TE Mharshi nagar-03 Nos SAC units i/c loading - unloading etc. complete as required.

ITC of following accessories, testing etc (a) L.T. Panel ( Size-1.7mx1.1mx0.3m )- 01 no, (b) TP MCB DB 4 Way- 01 no ( c) Main Switch 125A 415v- 01 no ,(d)2 way MCB Box with 25 A DP MCB

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Upto 35 sq. mm on wall/ surface/ in loop as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 4X16 sqmm size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and drawing 3 core 2.5 Sqmm multi core copper conductor PVC insulated FR Power cable for electrical connection etc. as reqd.

SITC of 20 Watt 1200 mm LED tubelight omplete with all accessories etc. as required. (M/s Phillips / Havells/ Bajaj/ Crompton or SS make)

Supplying and drawing of 2 x 1.5 Sqmm FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/PVC conduit as required.

SITC of 4 Pole 100A 415 V On Load Change over Switch with side handle operation in sheet steel enclousers on wall, connection etc ( Make - HPL/ Havells/ L&T or similar superior make )-

UNIFLOW REFRIGERATION CO.