SPL REPAIR REPLACEMENT TO SOLAR WATER HEATERS AND BER AIR CONDITIONERS ALONGWITH CERTAIN ALLIED WORKS UNDER AGE (I) AYODHYA CANTT

Dismantling of split air conditioning of capacity 1.5 / 2.0 / 1.0 TR complete with indoor/outdoor unit from any location of Ayodhya Cantt and deposited to MES yard and making good surfaces to match the existing complete all as specified and directed by Engineer-in-Charge.

Dismantling solar water heating system panel of 300 litres capacity of any make and type by removing the glass panel carefully and refixing it after cleaning dust, cleaning the water collector tubes and aluminium foil including de-scaling the existing hot water storage tank of any capacity and replacement of rock wool, complete all as specified and directed by Engineer-in-Charge.

Taking down old and unserviceable sub main wiring of any size / type / core including earth wire with batten conduit etc complete all as specified and directed by Engineer-in-Charge.

Supply, install, commissioning and testing of hi wall split type air conditioner inverter type of capacity 1.5 TR (4500 K Cal/Hr), single phase, suitable for 230 V+10%, 50Hz, AC supply with chordless remote control unit using non-CFC refrigerant Gas, minimum 5 star rating and energy efficient heating and cooling arrangements twin rotary complete comprising of following :- (a) Indoor unit with three speed blower fan with motor of appropriate capacity including PCB, thermostatic control, air filter and drain for condensing water (b) Outdoor unit comprising compressor, air cooled copper condensor with fan and motor, unit to be installed outside the building / on roof (c) Refrigerant copper pipe for suction and discharge line with insulation, condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safety accessories including control wiring for evaporator & condensing Unit with suitable size of copper cable. Note:- (i) Cutting holes in walls / window of any thickness for installation of AC etc, connection and making good the disturbed surface to match with the existing surface after work shall be done and cost is included in quoted rate . (ii) Electrical cable required to connect outdoor unit wih Indoor unit and Indoor unit to voltage stabilizer inclusive in above rate. (iii) Powder coated MS bracket / wall stand for fixing out door unit in wall or roof top with necessary grouting MS hold fast, bolts etc is included above rate. .

All as per Srl item No. 4.00 above but capacity 2 TR (6000 K cal/hr) complete all as specified and directed by Engineer-in-Charge.

Supply, install,commissioning and testing of hi wall split type air conditioner inverter type of capacity 1.0 TR single phase suitable for 230 V +10%, 50Hz AC supply with chordless remote control unit using Non CFC refrigerant Gas,minimum 5 star rating and energy efficient 3.2 complete comprising of following :- (a) indoor unit with three speed blower fan with motor of appropriate capacity including PCB,thermostatic control,air filter and drain for condensing water (b) Outdoor unit comprising compressor ,air cooledcopper condensor with fan and motor unit shall be installed outside the building / on roof (c) Refrigerant copper pipe for suction and discharge line with insulation ,condensing water drain pipe & protected by suitable size of flexible PVC conduit with control valves & safty accessories including control wiring for evaporator & condensing Unit with suitable size of copper cable. Note :- (i). Cutting holes in walls/window of any thickness for installation of AC etc, connection and making good the disturbed surface to match with the existing surface after work shall be done and cost is included in quoted rate . (ii) Electrical cable required to connect outdoor unit wih indoor unit and indore unit to voltage stabilizer inclusive in quoted rate. (iii) Powder coated MS bracket / wall stand for fixing outdoor unit in wall or roof top with necessary grouting MS hold fast, bolts etc is included in quoted rate. .

S&F electronic wall mounted digital display (Input & output) voltage stabilizer for automatic voltage correction single phase, naturally air cooled, indoor type, designed for input voltage between 170 Volt to 250 Volts and out put voltage 230Volt and High / low voltage cut off with facility of including instant start & time delay relay of 3 minute capacity 5KVA complete all as specified and directed by Engineer-in-Charge. . Make- Microtek/V guard / Blue bird

S&F Submain wiring with two single core PVC insulated FRLSH multistranded copper conductor cable of size 4 Sqmm, drawn in and including non metallic heavy duty rigid concealed PVC conduit not less than 25 mm size ISI marked with all fittings / accessories and 4 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire complete all as specified and directed by Engineer-in-Charge.

S&F Submain wiring with two single core PVC insulated FRLSH multistranded copper conductor cable of size 6 Sqmm, drawn in and including non metallic heavy duty rigid concealed PVC conduit not less than 25 mm size ISI marked with all fittings / accessories and 6 Sqmm FRLSH multistranded copper conductor cable as continuous earth wire complete all as specified and directed by Engineer-in-Charge.

S&F in replacement, socket outlet 5 pin 20 Amps modular type, 2 module with suitable size of module metal flux boxes including modular front cover plate and back plate for mounting modular type switch & socket with one single pole modular type MCB of capacity 20 Amps (1 module) including electrical complete all as specified and directed by Engineer-in-Charge.