eTenders

Technical Eval

Works

Miscellaneous Works

Design, Fabrication and SITC of Console Panel including Termination of Electrical Control Cables for CT Fans, AHUs, Exhaust Fans, Fresh Air Fans, Chillers and Condenser Pumps of AC Plant at Hotel Samrat, New Delhi

India Tourism Development Corporation Limited

New Delhi, Delhi

Amount: ₹14.8 LCloses: 19 May 2026Closed

Timeline

Published8 May 2026
Closed19 May 2026
Technical Evaluation7 Jul 2026
Award—

Bids

6 Bids7 Jul 2026

#	Company	Status
1	PANESAR ELECTRIC WORKS Accepted-Technical	Accepted-Technical Technically at par
2	Pure tech services Accepted-Technical	Accepted-Technical Technically at par
3	Avon Electricals Rejected-Technical	Rejected-Technical Not Technically at par
4	ENDEAVOUR POWER SERVICES Rejected-Technical	Rejected-Technical Not Technically at par
5	M/s Stackvolt Engineers Rejected-Technical	Rejected-Technical Not Technically at par

Tender Value

₹14.8 L

EMD Value

₹29,700

Closing Date

19 May 2026, 4:00 pmClosed

Tender Inviting Organisation

Name

Sr. Mgr. E and M

Address

Samrat Hotel, 50B, KautilyaMarg, Chanakyapuri, New Delhi-110021

Work Description

Design, Fabrication and SITC of Console Panel including Termination of Electrical Control Cables for CT Fans, AHUs, Exhaust Fans, Fresh Air Fans, Chillers and Condenser Pumps of AC Plant at Hotel Samrat, New Delhi

Tender Information

Tender ID

2026_ITDC_276795_1

Reference Number

Engg/EM/Console/Cable/26-27

Tender Type

Open Tender

Product Category

Miscellaneous Works

Form of Contract

Works

Period of Work

120 days

Location

New Delhi

Source Website

Subscribe to view

Eligibility / Pre-Qualification

As per tender document

Documents Required

19 documents required · 19 mandatory

Fee/PreQual/Technical

RequiredDigitally signed complete tender documents including corrigendum if any (.pdf)

RequiredEMD Fees as per NIT Clause no.7,8 (.pdf)

RequiredProof of average annual financial turnover during last three years as per NIT Clause no.19 (.pdf)

RequiredProof of having successfully Completed Similar works during last seven years as per NIT Clause no.13 (.pdf)

RequiredProof and Copy of valid PAN No as per NIT Clause no.15 (.pdf)

RequiredCopy of Registration under GST Law as per NIT Clause no.16 (.pdf)

RequiredCopy of Registration with Provident Fund, ESIC authority as per NIT Clause no.17 (.pdf)

RequiredCopies of similar works executed in last three years as per NIT Clause no.14 (.pdf)

RequiredHistory and Structure of firm with details and list of technical staff as per NIT Clause no.20 (.pdf)

RequiredList of Machinery, Tools, Plants and Equipment as per NIT Clause no.21 (.pdf)

RequiredAudited Balance Sheet for the last three FY ending,2022-23, 2023-24,2024-25 as per NIT Clause no.18 (.pdf)

RequiredAn Affidavit on stamp paper of Rs.100.00 Non-judicial be submitted as per NIT Clause no.24 (.pdf)

RequiredPre Contract Integrity Pact Plain Paper (.pdf)

RequiredGST Law Annexure 2 and 2a (.pdf)

RequiredEMD Refund Form (To be filed by the contractor) (.pdf)

RequiredUndertaking for blacklisted/Penalty as per NIT Clause no.22-A,B (.pdf)

RequiredAll certificates/doc.shall be submitted by firm should be digitally signed as per NIT clause no.23 (.pdf)

RequiredAny Other Documents (.pdf)

Finance

RequiredPrice bid (.xls)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹29,700

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

7 Jul 2026

Published

8 May 2026

Bid Opening

20 May 2026

Download Starts

8 May 2026

Download Ends

19 May 2026

Submission Starts

8 May 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (5 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	a) SITC and Fabrication Single Door Console Panel (in Two Portion) powder coated painted made from 1.6 mm thick CRC sheet i/c internal wiring with copper conductor wire, thimble, cable ferrules , cable tie, PVC Channel, MCB channels / DIN Bar etc. as required. (Panel size 1300X1100X300mm each) x 02 Nos. b) Terminal Block 10mm -260 Nos. c) End Plate for Terminal Block -60 Nos. d) Terminal Block Stopper -120 Nos. e) MCB Channel / DIN BAR -10 Mtr f) FRLS Copper wire 1.5sqmm -900 Mtr g) Copper Thimble 1.5mm -1800 Nos. h) Auto Manual switch -60 Nos. i) Auto Manual switch Stickers -60 Nos. j) Push Buttons ON OFF with Element -120 Set k) Red /Green colour LED Indication Lights -120 Set l) PVC Channel 45mm x45mm with cover -30 Nos. m) SP MCB 6A / 10A -4 nos. n) DP MCB 20A -2 Nos. o) 20A & 10A Switch Socket Combined Unit, Caption with 5-in-1 with Box (4 Fixing Holes) -2 Nos. p) 20W LED Tube Light -2 Nos. q) MNX-9 CONTACTOR -60 Nos. r) ADD-ON AUXILLARY CONTACT -60 Nos. s) Identification Stickers / Marks -120 LS t) MS Angle Iron Stand size 950mmX300mmX600mm with cutting hole , painting , Nut Bolts etc. -2 Nos. (MS Angle size 40mm x 40mm x 6mm)	1	Job	-	-
2	Making control wiring of DOL starter , Star delta starter of AHU , CT fan , pump ,motors, exhaust blowers, etc. i/c Supplying and fixing following material in existing panel for making automanual remote control system as reqd. a) Terminal Block 10mm -4 Nos. b) End Plate for Terminal Block -1 No. c) Terminal Block Stopper -2 Nos. d) MCB Channel / DIN BAR -1 LS e) FRLS Copper wire 1.5sqmm -8 Mtr f) Copper Thimble 1.5mm -12 Nos. g) Auto Manual switch -1 No.	60	Job	-	-
3	Supplying and making end termination with 22mm brass compression gland and Copper lugs of PVC insulated and PVC sheathed / XLPE Copper armoured cable size 4C X 1.5sqmm size of 1.1 KV grade as required.	120	Nos	-	-
4	Dismantling existing panel, after cables tracing & identify control circuits of starter on-off system & shifting it to scrap yard as reqd.	1	Job	-	-
5	Supplying , Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE Copper Armoured cable of 4C X 1.5sqmm size of 1.1 KV grade on wall surface / cable tray as required.	2,500	Mtr.	-	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.03 MB

Technical Evaluation

tech_eval.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.53 MB

Work Item Documents

BOQ_323305.xls

BOQ • 0.22 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

PANESAR ELECTRIC WORKS

Accepted-Technical

Pure tech services

Accepted-Technical

Avon Electricals

Rejected-Technical

ENDEAVOUR POWER SERVICES

Rejected-Technical

M/s Stackvolt Engineers

Rejected-Technical

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

a) SITC and Fabrication Single Door Console Panel (in Two Portion) powder coated painted made from 1.6 mm thick CRC sheet i/c internal wiring with copper conductor wire, thimble, cable ferrules , cable tie, PVC Channel, MCB channels / DIN Bar etc. as required. (Panel size 1300X1100X300mm each) x 02 Nos. b) Terminal Block 10mm -260 Nos. c) End Plate for Terminal Block -60 Nos. d) Terminal Block Stopper -120 Nos. e) MCB Channel / DIN BAR -10 Mtr f) FRLS Copper wire 1.5sqmm -900 Mtr g) Copper Thimble 1.5mm -1800 Nos. h) Auto Manual switch -60 Nos. i) Auto Manual switch Stickers -60 Nos. j) Push Buttons ON OFF with Element -120 Set k) Red /Green colour LED Indication Lights -120 Set l) PVC Channel 45mm x45mm with cover -30 Nos. m) SP MCB 6A / 10A -4 nos. n) DP MCB 20A -2 Nos. o) 20A & 10A Switch Socket Combined Unit, Caption with 5-in-1 with Box (4 Fixing Holes) -2 Nos. p) 20W LED Tube Light -2 Nos. q) MNX-9 CONTACTOR -60 Nos. r) ADD-ON AUXILLARY CONTACT -60 Nos. s) Identification Stickers / Marks -120 LS t) MS Angle Iron Stand size 950mmX300mmX600mm with cutting hole , painting , Nut Bolts etc. -2 Nos. (MS Angle size 40mm x 40mm x 6mm)

Job

Making control wiring of DOL starter , Star delta starter of AHU , CT fan , pump ,motors, exhaust blowers, etc. i/c Supplying and fixing following material in existing panel for making automanual remote control system as reqd. a) Terminal Block 10mm -4 Nos. b) End Plate for Terminal Block -1 No. c) Terminal Block Stopper -2 Nos. d) MCB Channel / DIN BAR -1 LS e) FRLS Copper wire 1.5sqmm -8 Mtr f) Copper Thimble 1.5mm -12 Nos. g) Auto Manual switch -1 No.

Job

Supplying and making end termination with 22mm brass compression gland and Copper lugs of PVC insulated and PVC sheathed / XLPE Copper armoured cable size 4C X 1.5sqmm size of 1.1 KV grade as required.

120

Nos

Dismantling existing panel, after cables tracing & identify control circuits of starter on-off system & shifting it to scrap yard as reqd.

Job

Supplying , Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE Copper Armoured cable of 4C X 1.5sqmm size of 1.1 KV grade on wall surface / cable tray as required.

2,500

Mtr.