Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.6 LAccepted-AOC | 1 | Accepted-AOC AOC | |
| 2 | 2₹16.9 L+₹2.2 L (15.3%)Rejected-Finance 72 USMAN ENCAVE SECTOR O ALIGANJ LUCKNOW 226004 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226004 | 2 | Rejected-Finance Not being lowest | |
| 3 | 3₹18.7 L+₹4.0 L (27.5%)Rejected-Finance | 3 | Rejected-Finance Not being lowest | |
| 4 | 4₹19.2 L+₹4.5 L (30.8%)Rejected-Finance | 4 | Rejected-Finance Not being lowest | |
| 5 | 5₹20.7 L+₹6.0 L (41.1%)Rejected-Finance | 5 | Rejected-Finance Not being lowest |
Tender Value
Refer Docs
EMD Value
₹50,000
Closing Date
19 Jun 2021, 6:00 pmClosed
CWE LUCKNOW
229 MG ROAD LUCKNOW CANTT LUCKNOW
PERIODICAL MAINTENANCE /SERVICING /OVERHAULING TO HT BREAKERS INCLUDING CTs,PTs AND ALL ACCESSORIES AND CALIBRATION OF RELAYS AT SANJOG CHHETRI VIHAR, RS VIHAR, CARIAPPA SUB STATION, HQ CC, OLD POLO, TOP NO-1 AND OTHER AREA UNDER GE E/M LUCKNOW
2021_MES_446790_1
CWE/LKO/EM/T-16 OF 2021-22
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Lucknow
MES contractors enlisted in Class E and category b(ii) and for unenlisted contractors meeting the enlistment criteria corresponding to value class and category of work and having executed similar nature of work
8 documents required · 8 mandatory
₹500
GE EM LUCKNOW
₹50,000
Yes
25 Jun 2021
29 May 2021
21 Jun 2021
29 May 2021
19 Jun 2021
14 Jun 2021
Amount
Servicing to 11KV HT VCB/RMU any type complete including the following:- (a) Taking out 11KV HT VCB/(SF6 type) of 400/800 Amps rating from RMU panel after switching off electric supply, checking of mechanical system for proper functioning of upward/downward movement of HT VCB/(SF6 type)+D35 including opening the VCB/(SF6 type) & checking the mechanical system. Cleaning & servicing the fixed/ moving contact & blowing out dust and applying the proper lubrication/ greasing and reassembling the VCB/(SF6 type) including connection to HT panel complete insulating oil to be replaced where required all as directed.(b) Taking out relay set (2 Nos over current & 01 No earth fault relay) of any make from HT11KV VCB/(SF-6 type) panel and cleaning the contact (NO+NC) by CTC solution and adjust the contact and calibrate the relay by relay testing kit & proper plug setting as per reqd load & time delay and fixing the relay set in HT panels complete all as specified and directed.Note for (a) & (b):- (i) Testing of above job to be carried out by engineers of authorised dealer/service centre of concerned OBC. (ii) Replacing new items shall be measured and paid separately as supply only. (iii) Contractor shall submit the connected document/graph for relay calibration duly authenticated by authorised dealer/service centre).The rate quoted by the contractor shall include cost of any other spare parts/relay not mentioned here-in but essentially required for functioning of the system .No extra payment will be made for the spare parts/relay .
Supply only tripping coil assembly suitable for VCB, operating on 30/110 volt system and testing complete all as specified and directed.
Supply only closing coil operated on 110 /30 volt system suitable for working of relay of VCB complete all as specified and directed.
Supply only spring charging motor suitable for fixing with 11 KV indoor type VCB panels complete all as specified and directed.
Supply only charging bottles suitable for 11 KV VCB at RMU complete all as specified and directed.
Supply only moving contacts of VCB at RMU made of copper and suitable for 11 KV VCB compete all as specified and directed.
Supply only indicator light (LED type) suitable to operate on 30 volts DC/110 V AC having two covers red/green/blue for RMU/VVCB panel as per existing make/model/type including taking down old one compete all as specified and directed.
Supply only cast regin wound CT as per existing ratio/make/model/capacity complete all as specified and directed.
Supply only cast regin wound PT as per existing ratio/make/model/capacity complete all as specified and directed.
Supply only Elstein HFS panel heater 300 watt suitable for 11/33 kv VCB for removing the moisture complete all as specified and directed.
Supply only relay as per existing make/make/capcity complete all as specified and directed.
Supply only isolating contact flat type as per existing make/model/type/capacity complete all as specified and directed.
Supply only vacumm interrupter as per existing make/model/type/capacity complete all as specified and directed.
Supply only breaker housing HVX-HR as per existing make/model/capacity complete all as specified and directed.
Supply only breaker insulating rod as per exsting make/model/capacity complete all as specified and directed.
Supply only breaker auxilary switch (6NO+6NC) as per exsting make/model/capacity etc complete all as specified and directed.
Supply only motor cut off switch as per exsiting make/model/capacity etc complete all as specified and directed.
Supply only main drive shaft assy as per existing make/model/capacity etc complete all as specified and directed.
Supply only trip fork lingage assy as per existing make/model/capacity etc complete all as specified and directed.
Supply only ratchet wheel as per existing make/model/capacity etc complete all as specified and directed.
Supply only pin for rachet as per existing make/model/capacity etc complete all as specified and directed.
Supply only hanle block assy as per existing make/model/capacity etc complete all as specified and directed.
Supply only closing coil box assy (without coil) as per existing make/model/capacity etc complete all as specified and directed.
Supply only trip coil box assy (without coil) as per existing make/model/capacity etc complete all as specified and directed.
Supply only motor cut off lever assy as per existing make/model/capacity etc complete all as specified and directed.
Supply only trip prop support assy as per existing make/model/capacity etc complete all as specified and directed.
Supply only release lever as per existing make/model/capacity etc complete all as specified and directed.
Supply only pin for release lever as per existing make/model/capacity etc complete all as specified and directed.
Supply only auxilary switch drive assy as per existing make/model/capacity etc complete all as specified and directed.
Supply only charging pawl as per existing make/model/capacity etc complete all as specified and directed.
Supply only buffter for spring as per existing make/model/capacity etc complete all as specified and directed.
Supply only over ride stop as per exisging make/model/capacity etc complete all as specified and directed.
Supply only over ride stop pin as per exisging make/model/capacity etc complete all as specified and directed.
Supply only 24 pin secondary plug & socket assy as per existing make/model/capacity etc complete all as specified and directed.
Supply only spring charging handle as per existing make/model/shape/size etc complete all as specified and directed.
Supply only limit switch assy as per exisging make/model/capacity etc complete all as specified and directed.
Supply only VCB (trolley) 800A, sct.25/26 3ka spring charging motor 230 volts AC coil voltage 24 V DC with PT on trolley sinlgle trip coil housing in existing VCB panel etc complete as per exisging make/model/size etc complete all as specified and directed.
Supply only VCB operating machanisume without coil and motors per existing make/model/size etc complete all as specified and directed.
Repair/maintenance of transformer distribution panel and disconnecting the electrical connection from unserviceable parts and taking out the unserviceable material from the panel and supply and fix the new material as per existing make/model/capacity, paiting with one coat of hammer tone synthetic enamel paint and nut bolt,washer and suitble size aluminium lugs, repair of door hinges, replacing the worn out portion including welding etc complete as specified and directed Note :- (i) The rates quoted by the contactor shall include cost of any other spare parts not mentioned herein but essentially required for functioning of the system.(ii) Unit rates quoted by tenderers shall deem to include for, bolts, washers, lugs, thimble, wires and petty items required for efficient and smooth functioning of the equipment without any extra cost to the Govt. (iii) Replacing new items shall be measured and paid separately as supply only.
Supply only MCCB 4 pole ,50 KA ,630 Amp with thermal & magnetic complete all as specified and directed.
Supply MCCB 4 pole, 36 KA, 250 Amp with thermal & magnetic release complete all as specified and directed.
Supply only MCCB 3 pole ,36 KA, 250 Amp with thermal & magnetic release complete all as specified and directed.
Supply only MCCB 4 pole ,36 KA ,200 Amp with thermal & magnetic release complete all as specified and directed.
Supply only MCCB 3 pole ,36 KA,200 Amp with thermal & magnetic release complete all as specified and directed.
Supply only MCCB 4 pole, 36 KA ,160 Amp with thermal & magnetic release complete all as specified and directed.
Supply only MCCB 3 pole ,36 KA, 160 Amp with thermal & magnetic release complete all as specified and directed.
Supply only MCCB 4 pole, 18 KA ,125 Amp with thermal & magnetic release complete all as specified and directed.
Supply only MCCB 3 pole, 18 KA, 125 Amp with thermal & magnetic release complete all as specified and directed.
Supply only MCCB 4 pole, 18 KA, 63 Amp with thermal & magnetic release complete all as specified and directed.
Supply only MCCB 3 pole ,18 KA, 63 Amp with thermal & magnetic release complete all as specified and directed.
Supply only MCB TPN ,10 KA, 63 Amp `C' curve complete all as specified and directed.
Supply only MCB TPN, 10 KA,40 Amp `C' curve complete all as specified and directed.
Supply only Digital Voltmeter complete all as specified and directed.
Supply only Digital Ammeter complete all as specified and directed.
Supply only LED Indicator complete all as specified and directed.
Supply only slector switch complete all as specified and directed.
Supply only current transformer for measuring the current as per existing make/model/capacity and CT ratio complete all as specified and directed.
Prediodical servicing of air circuit breaker and disconnecting the electrical connection from unserviceable parts and taking out the unserviceable material from the ACB and supply and fix the new material as per existing make/model/capacity incl cleanding and greasing fixed and movement parts etc complete as specified and directed Note :- (i) The rates quoted by the contactor shall include cost of any other spare parts not mentioned herein but essentially required for functioning of the system.(ii) Unit rates quoted by tenderers shall deem to include for, bolts, washers, lugs, thimble, wires and petty items required for efficient and smooth functioning of the equipment without any extra cost to the Govt. (iii) Replacing new items shall be measured and paid separately as supply only.
Supply only Shunt release complete all as specified and directed.
Supply only Under voltage release complete all as specified and directed.
Supply only Earth fault release complete all as specified and directed.
Supply only Remote fault indicator complete all as specified and directed.
Supply only Microswitch for indication complete all as specified and directed.
Supply only lockable trip push botton complete all as specified and directed.
Supply only locking ACB in isolating position complete all as specified and directed.
Supply only locking ACB in any position complete all as specified and directed.
Supply only racking interlock complete all as specified and directed.
Supply only door interlock complete all as specified and directed.
Supply only machinal operation counter complete all as specified and directed.
Supply only Mounting kit for front mounted counter complete all as specified and directed.
Supply only sspring charge indication micorswitech complete all as specified and directed.
Supply only racking pad lock assembly complete all as specified and directed.
S & F of cable joint kit for 11 KV (earthed) grade cable for straight through heatshrink type joint complete with jointing material and accessories sutable for XLPE armoured aluminium conductor cable of size 50-95 sqmm etc complete all as specified and directed.
S & F of cable joint kit for 11 KV (earthed) grade cable for straight through heatshrink type joint complete with jointing material and accessories sutable for XLPE armoured aluminium conductor cable of size 120-185 sqmm etc complete all as specified and directed.
S & F of cable joint kit for 11 KV (earthed) grade cable for out door termination heatshrink type joint with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 50-95 sqmm complete all as specified and directed.
S & F of cable joint kit for 11 KV (earthed) grade cable for out door termination kit heatshrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 120-185 sqmm complete all as specified and directed.
S & F of cable joint kit for 11 KV (earthed) grade cable for end termination indoor heatshrink type joint complete with jointing material and accessories suitable for XLPE armoured aluminium conductor cable of size 50-95 sqmm complete all as specified and directed.
S & F of cable joint kit for 11 KV (earthed) grade cable for end termination indoor heatshrink type joint complete with jointing material and accessories suitable XLPE armoured aluminium conductor cable of size 120-185 sqmm complete all as specified and directed.
Hiring of cable fault detector machine to detect exact position of faulty XLPE /PVC HT cable, 11000 Volts grade heavy duty aluminium conductor of any size and any length including excavation , relaying of protection cable cover, & removing and earth filling etc complete as specified and directed. Note : If any defect occurred at any place of Lucknow cantt area, the contractor will provide machnic & fault locator with material with in one hours for rectification of defects. If the contractor not provide the machanie and material with schedule time, the amount will be deduct 1000/hrs after receiving phone/massage/ watsup /email etc complete all as specified and directed.
M&L for spraying the chemical (Roundup) in sub station in the ration 1: 3 for buring the grass every three month complete all as specified and directed.
Unnati Engineers
Shree Kanth Technologies
Ajanta Associates
DEV INFRATECH
Industrial Traders
M/S S.B. Singh and Sons
M K Engineers and Contractors
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .