Repair to wall joinery, sanitary fittings and misc work for OTM and MD Accn at Mand and Old Cantt kapurthala and Repair/Replacement of wiring and allied works at Mil Stn Beas under GE Kapurthala

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 300 x200 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement plaster (1:4), complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surface 350 x250 x 7mm/450 x350 x 7mm thick set and jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement plaster (1:4), complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.06sqm but n.exc 0.11 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed by Engr-in-Charge, complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.18sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed by Engr-in-Charge.

M&L for granite for cooking platform 20mm thick machine cut, bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 20 mm thick bedding layer in CM 1:6, complete all as specified and directed by Engr-in-Charge.

M&L for machine cut kota stone slab flooring 16-20mm thick as in flooring laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing incl 20mm thick screed bed cm 1:4 complete all as specified and directed by Engr-in-Charge.

All as per srl item No 8 here in before but as in riser of steps, skirting/dado incl cement plaster in CM 1:4, 10mm thick complete all as specified and directed by Engr-in-Charge.

Demolition of brick/block masonry built in CM including all quoins, arches, pillars etc and clearing off the premises, complete all as specified and directed by Engr-in-Charge.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4, complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed by Engr-in-Charge.

M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed by Engr-in-Charge.

M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas etc complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick work or concrete surfaces incl racking out joints complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick Rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished fair and smooth complete all as specified and directed by Engr-in-Charge. Note: water proofing compound shall be measured seprately.

Supply only liquid water proofing compound, complete all as specified and directed by Engr-in-Charge.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying three coats white wash on ceiling complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying one coat of Birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge.

M&L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation of surfaces, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of ceiling and one coat of whitewash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plastered surfaces of walls and applying one coat of Birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper after complete removal of existing Surface complete all as specified and directed by Engr-in-Charge.

M&L for applying two coats of cement base paint on old plastered or unplastered wall surface after complete removal of existing treatment complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge.

M&L 75mm thick PCC 1:3:6 type C2 using 20mm stone aggregate as in plinth protection/hard standing finishing the surface even and smooth with out using extra cement, complete all as specified and directed by Engr-in-Charge.

M&L for applying evenly a tack coat of industrial bitumen 85.25 @ 1.20 Kg/sqm including cleaning surfaces complete all as specified and directed by Engr-in-Charge.

M&L PCC (1:4:8) type D2 using 40mm graded aggregate 75mm thick as in sub base complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area not exc 1.50 sqm each, complete all as specified and directed by Engr-in-Charge.

Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4sqm each complete all as specified and directed by Engr-in-Charge.

Taking down Shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm each, complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening, complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame with PCC (1:3:6).

M&L PCC 1:3:6 type C2 using 20mm graded stone aggregate as in filling of chowkhats complete all as specified and directed by Engr-in-Charge.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed by Engr-in-Charge.

S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters complete all as specified and directed by Engr-in-Charge.

S&F of Factory made PVC panel door shutter 28 to 30 mm thick (style) consisting of PVC sheet panel inside stiles and rails and decorative PVC beading of 10mm x 10mm (900) frame made out of MS tubes for top & bottom rails.The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly. MS frame shall be covered with heat moulded decorative colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, suppling & fixing in the frame at site as per specification & drawing in SSR Part II, complete all as specified and directed by Engr-in-Charge.

S&F PVC cupboard of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Plain/Printed/Prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and directed by Engr-in-Charge.

S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel, complete all as specified and directed by Engr-in-Charge.

S&F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm, complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm, complete all as specified and directed by Engr-in-Charge.

S&F extruded aluminium alloys handles frabicated type anodized of size 150mm long, complete all as specified and directed by Engr-in-Charge.

S&F 300mm long mild steel sliding door bolt plate type stove enamelled black and bright bolt not less than 12mm dia including a minimum of 6 nos of nuts and bolts complete all as specified and directed by Engr-in-Charge.

S&F mild steel barrel tower bolt, stove enamelled black, with bright bolt of 150mm size complete all as specified and directed by Engr-in-Charge.

S&F mild steel pressed handle, oval type stove enamelled black of size 125mm, complete all as specified and directed by Engr-in-Charge.

S&F for Floor door stopper of aluminium alloy body and tongue, anodised, Overall length of cover plate 140 mm , with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in-Charge.

S&F150 mm Hasp and staple, aluminium anodised, wire type, including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note:- Glass and painting shall be measured and paid separately under appropriate item (ii) Irrespective of whatever shown on drgs, MS gills shall be of 12mm dia MS square bar.

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf (f) Grills made out of MS square bar 12mm dia welded to FI frame complete all as specified and shown on drawings. Note:- Wire mesh and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium frame powder coated for doors & windows with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium windows and ventilators powder coated with frames & shutters with one or more rebates including joining cleats, glazing clips, rubber padding, anodised aluminium snap beading screws etc and necessary aluminium iron mongary for fixing etc complete all as specified and directed by Engr-in-Charge.

S&FPowder coated Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr-in-Charge.

M&L for securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting /oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work with complete all as specified and directed by Engr-in-Charge.

S&F 4.00mm thick plain glass in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engr-in-Charge.

S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil putty complete all as specified and directed by Engr-in-Charge.

S&F 6.30mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass (any thickness, size, quality ordescription ) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed by Engr-in-Charge.

S&F Aluminium (die cast body) Door closer hydraulically regulated designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs for stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.40mm and fixed with tinned tacks/screws with bolts incl leaping wooden, complete all as specified and directed by Engr-in-Charge.

S&F glavanised MS wire cloth, 0.56mm nominal dia of wore and average with of aperature 1.00mm and fiexed with tinned tacks or galvanised wire staples, complete all as specified and directed by Engr-in-Charge.

S&F Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, thickness of lath is 1.25mm but gear operated type with bevel gear box and crank handle all as specified and directed by Engineer - in - Charge.

S&F for framed work such as grills gratings etc with ends of bars shouldered and or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framed work of water tanks and similar work

S&F in repairs of size 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed by Engr-in-Charge.

M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof covering fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roof covering fixed with L-type or J-type or cranked hook bolts complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness, complete all as specified and directed by Engr-in-Charge.

S&FGl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. (Size of grid 605X605 mm) complete all as specified and directed by Engr-in-Charge.

S&F4 mm thick Non asbestos fibre cement building boards(designer) fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed by Engr-in-Charge.

M&L for 12mm perforated particle board 600 x 600 x 12mm for ceiling on aluminium snap grid frame work of 605 x 605 mm and hangers 6mm dia GI upto (1200mm length) adjusting level fixed to roof slab by means of celing cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fastner 12.5mm dia 40mm long complete all as specified and directed by Engr-in-Charge.

S&F PVC hollow wall panelling consisting of PVC profile 250mm wide and 6mm thick reinforced with PVC linining 10mm C/c with interlocking arrangement fixed to wall with PVC rowl plugs and steel screws 40cm C/C vertically by drilling holes fixing to walls of reqd height fixed with PVC cassing and capping for top and corner portion of panneling fixed ccomplete all as specified and directed by Engr-in-Charge.

Taking down GI tubing & connection 15mm dia laid in floor / trenches or fixed to walls ccomplete all as specified and directed by Engr-in-Charge.

S&F GI tubing 15mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed by Engr-in-Charge.

Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm dia stop valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/25mm-455gms/ 40mm - 690 gms) complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/20 mm - 210 gms/25mm-455gms/ 40mm - 690 gms) (Make: Prayag/Polytuff)

S&F in repairs 15mm dia Pillar taps fancy type long neck of cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed or iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs15mm Angle stop valve fancy type of cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed by Engr-in-Charge.

S&F in repair coloured Toilet paper holder of CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repair Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engr-in-Charge.

S&F in repairs of vitreous china bowl urinals flat back, half stall complete including providing & fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with & including 60cm long brass screws, jointing around urinal back in cement paste including flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs PTMT greating round 140mm size (minium weight 50 gms) complete all as specified and directed by Engr-in-Charge.

S&F in repairs 32 mm bore PVC waste cupling with PVC waste pipe for WHB complete all as specified and directed by Engr-in-Charge.

S&F in repairs 40 mm borePVC waste cupling with PVC waste pipe for Sink complete all as specified and directed by Engr-in-Charge.

S&F acrylic toilet cabinet with shelves 425mmx350mm 100 mm size , with shutter complete all as specified and directed by Engr-in-Charge.

S&F steel plate rack made of stainless steel 1mm thick over all size 600 mm x750mm complete all as specified and directed by Engr-in-Charge.

S&F PVC flushing cistern low level of capacity of 10 ltr, white, valve less symphonic action type complete with inlet ball valve float and handle or Push button type including brackets and fixed in repair complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china squatting pan Orissa pattern wash down water closet of size 580x440 mm, white, with integral foot rests complete fixed in repairs with P or S trap, PVC flushing cistern low level of 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacity make white in colour and PVC flush pipe 32mm dia complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia aluminium chromium plated tubular towel rails,D type,60cm long between flanges, complete all as specified and directed by Engr-in-Charge.

S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fo size 15mm, complete all as specified and directed by Engr-in-Charge.

Supply and fix for vitreous china ware wash basin white, flat back size 550 X 400mm with pedestal including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed by Engr-in-Charge.

S&F in repairs shower rose of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm), complete all as specified and directed by Engr-in-Charge.

S&F in repair kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr-in-Charge.

S&F soap dish, vitreous china white approx size 160x160x90mm, complete all as specified and directed by Engr-in-Charge.

S&F shelf of PTMT fixed with and including chromium plated brass screws and wooden plastic cleats(min. weight 300gm), complete all as specified and directed by Engr-in-Charge.

S&F in repair anodised aluminium alloy curtain rail chromium plated with fixing brackets, stops, roller etc complete all as specified and directed by Engr-in-Charge.

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good, complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rainwater pipes including all fittings complete all as specified and directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) pipes in repair single socketed in any length with rubber ring joints fixed to walls ccomplete all as specified and directed by Engr-in-Charge.

S&F 75 mm PVC (SWR) bend complete all as specified and directed by Engr-in-Charge.

S&F 110 mm PVC (SWR) bend complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) junction single,(single T) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) junction single,(double T) equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engr-in-Charge.

Dismantiling water tank PVC 500 Ltrs and removing from site complete all as specified and directed by Engr-in-Charge.

Dismantiling water tank PVC 1000 Ltrs and removing from site complete all as specified and directed by Engr-in-Charge.

Dismantiling water tank PVC 2000 Ltrs and removing from site complete all as specified and directed by Engr-in-Charge.

Supply, hoisting and fixing in position Rotational moulded Polyethylene water storage tank, 500 litres capacity conforming to IS-12701 (1989) cylindrical vertical type three-layered wall construction with closed top including inlet, outlet and wash out holes of approved make including taking down the old unserviceable water storage tank complete all as specified and as directed by Engr-in-Charge.

Supply, hoisting and fixing in position Rotational moulded Polyethylene water storage tank, 1000 litres capacity conforming to IS-12701 (1989) cylindrical vertical type three-layered wall construction with closed top including inlet, outlet and wash out holes of approved make including taking down the old unserviceable water storage tank complete all as specified and as directed by Engr-in-Charge.

Supply, hoisting and fixing in position Rotational moulded Polyethylene water storage tank, 2000 litres capacity conforming to IS-12701 (1989) cylindrical vertical type three-layered wall construction with closed top including inlet, outlet and wash out holes of approved make including taking down the old unserviceable water storage tank complete all as specified and as directed by Engr-in-Charge.

S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs, complete all as specified and directed by Engr-in-Charge.

Cutting grooves in brick wall, 75mm wide and 65mm deep inlcuding for inserting TMT bar as required length and shaping horizontal/vertical face of groove with cement mortar 1:3 complete all as specified and directed by Engr-in-Charge.

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs complete all as specified and directed by Engr-in-Charge.

Demolation of mud in roof any thickness incl plastering & leeping removed complete all as specified and directed by Engr-in-Charge.

S&F Vitreous China Ware Bowl for couple closet WC with soft closing seat cover along with cistren complete all as specified and directed by Engr-in-Charge.

PCC (1:5:10) type E2 using 40mm graded aggregate as in filling of sunken portion complete all as specified and directed by Engr-in-Charge.

Preparation of newly plastered surface making surface completely dry and applying a coat of bitumen primer @ 0.40 ltr/sqm and after drying of primer apply APP modified water proofing membrane with non woven polyster reinforcement 3mm thick superior multipolymericweighing not less than 3kg/sqm with properties of high penetration and centre core consisting of 90 micron high molecular high density polyethylene (MHHDPE) film consisting of five layers with a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm under and over the APP membrane laid with torching application to the surface complete and sealing the side as well as end laps (overlaps should not be less than 10 cm)

M&L 50 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in PCC padding over roof slab with using waterproofing liquid compound as per manufacturing instruction complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thick Brick tiles including & laid over 15 mm thick screed bed in cement mortar 1:6 with Jointing & Pointing in cement mortar (1:3) mixed with 5% of crude oil by wt of cement complete all as specified and directed by Engr-in-Charge.

Taking down old unsv carefully point wiring on casing caping/through conduit (light fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel terminal boxes including providing new 3 mm thick plastic laminated sheet cover (Hylem) including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth dolly complete all as specified and directed for one light point controlled by one, one way switch complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 137 but one fan point controlled by one, one way switch complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 137 but one socket outlet 3 Pin, 6 Amp on independent board complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 137 but one socket outlet 3 Pin, 6 Amp on same board complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 137 but one bell point controlled by one bell push complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 137 but one light point controlled by two 2 -way switches, with cables 1.5 Sqmm size complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including cast iron/pressed steel terminal boxes including providing new 3 mm thick plastic laminated sheet cover (Hylem) including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 143 but one socket outlet 3 Pin, 16 Amp on on same board complete all as specified and as directed by Engr-in-Charge.

S&F Switch piano type, polycarbonate one way 6 Amp complete all as specified and as directed by Engr-in-Charge.

S&F Switch piano type, polycarbonate two way 6 Amp complete all as specified and as directed by Engr-in-Charge.

S&F switch, 6 pin ,16 amps, flush type, polycarbonate, multipurpose, with indicator, 230 / 250 volts complete all as specified and as directed by Engr-in-Charge.

S&F Switch bell push 6 Amps, flush button type, polycarbonate, SP, one way, 230 Volts complete all as specified and as directed by Engr-in-Charge.

S&F socket out let multipurpose 5 pin 6 Amps, flush type, polycarbonate, 230 / 240 Volts including taking down unserviceable complete all as specified and as directed by Engr-in-Charge.

S&F socket out let multipurpose 5 pin 16 Amps, flush type, polycarbonate, 230 / 240 Volts including taking down unserviceable complete all as specified and as directed by Engr-in-Charge.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including MS modular terminal boxes, covered with modular plates and cover, concealed/fixed surface to walls etc including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth dolly complete all as specified and directed for one light point controlled by one, one way switch complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 152 but one fan point controlled by one, one way switch complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 152 but one socket outlet 3 Pin, 6 Amp on independent board complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 152 but one socket outlet 3 Pin, 6 Amp on same board complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 152 but one bell point controlled by one bell push complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 152 but one light point controlled by two 2 -way switches, with cables 1.5 Sqmm size complete all as specified and as directed by Engr-in-Charge.

M&L for point wiring for controlled by one switch with PVC unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm (nominal area) in and including PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC cassing capping on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including MS modular terminal boxes,covered with modular plates and cover, concealed/fixed surface to walls etc, including one run of PVC insulated FRLS copper conductor cable of 1.5 Sqmm with green insulation as earth dolly for 6 pin, 16 Amp socket outlet on Independent board complete all as specified and as directed by Engr-in-Charge.

All as per Srl item No 158 but one socket outlet 3 Pin, 16 Amp on on same board complete all as specified and as directed by Engr-in-Charge.

S&F modular switch 1 way 6 amp.1 module complete all as specified and as directed by Engr-in-Charge.

S&F modular switch 2 way 6 amp.1 module complete all as specified and as directed by Engr-in-Charge.

S&F modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and as directed by Engr-in-Charge.

S&F modular switch 1 way 16 amp 1 module complete all as specified and as directed by Engr-in-Charge.

S&F modular Socket, 16A - 2/3 pin combined 2 module complete all as specified and as directed by Engr-in-Charge.

S&F modular bell push 6 Amps, flush button type,polycarbonate, SP, one way, 230 Volts complete all as specified and as directed by Engr-in-Charge.

S&F modular type, electronic fan regulator 230 volts, step type socket type, hum free 100/300 watt complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete, including taking down unsv exhaust fan of any size and deposit to MES store yard complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable holder and supply and fix Angular holder insulated body with back plate suitable for batten fittings complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of factory made powder coated distribution board SP & N,230V, 2 way, mounting for MCB's including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of factory made powder coated distribution board SP & N, 230 V, 8 way,mounting for MCB's including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of factory made powder coated distribution board SP & N ,230V,12 way,mounting for MCB's including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB complete all as specified and as directed by Engr-in-Charge.

S&F in replacement factory made powder coated distribution board TP&N, 440V, 4 way double door including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB complete all as specified and as directed by Engr-in-Charge.

S&F in replacement factory made powder coated distribution board TP&N, 440V, 6 way double door including bus bar, Neutral bar, standard DIN rail, earth bar complete including taking down UNSV DB complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of factory made powder coated Vertical DBs TPN ,440 V, 4 Way, in double door suitable for flush mounting and surface mounting with 250 A copper busbar for each phase with 2 neutral bar,2 earthbar and cable ties for cable management and fully insulated busber and shrouded neutral bars with provision of 160 A TP/FP MCCB as Incomer (W/O MCCBs) including taking down UNSV DBs complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 32 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 63 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 415V, 10KA 'C' curve miniature circuit breaker (MCB) TP 32 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 415V, 10KA 'C' curve miniature circuit breaker (MCB) TP 63 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 415V, 10KA 'C' curve miniature circuit breaker (MCB) TPN 32 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs complete all as specified and as directed by Engr-in-Charge.

S&F in replacement of 415V, 10KA 'C' curve miniature circuit breaker (MCB) TPN 63 Amps capacity in the MCB DB complete with connection testing and commissioning including taking down old burnt/unserviceable MCBs complete all as specified and as directed by Engr-in-Charge.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) including taking down old unserviceable complete all as specified and as directed by Engr-in-Charge.

M&L for bell multi music type Ding Dong, AC 230 Volts, single pole (ISI Marked) including taking downof unserviceable complete all as specified and as directed by Engr-in-Charge.

M&L for repairing the existing LED tube light fitting 18/20 watt of any make or type by providing suitable driver, LED tube rod etc and checking connection etc complete all as specified and as directed by Engr-in-Charge.

Taking down old unsv laminated sheet and S&F laminated sheet 8" x 4" , including fix the old switch, socket, regulator retrive from old sheet to new laminated sheet, including screws, nuts bolts etc complete all as specified and as directed by Engr-in-Charge.

Taking down old unsv Bulk head light/ Bldg security light and ,Supply & fixing LED bldg security light fitting 20 watt Powder coated pressure die cast aluminium compact LED security light including 1.5 mtr long 40 mm bore GI pipe mounting bracket made to shape for fixing on wall with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers acomplete all as specified and as directed by Engr-in-Charge.

Taking down old unsv ceiling fan, Supply & fix ceiling fan 1200 mm sweep, 240 Volts, Colour- Opal White and connecting up including provision of flexible copper conductor cable from ceiling rose / connector to fan and GI pipe/ steel rod, nuts, bolts, clamps etc as required at site complete all as specified and as directed by Engr-in-Charge.

Taking down old unsv water heater , Supply and fix water heater storage type electric, capacity 25 litres BEE 5 star rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces and complete all as specified and as directed by Engr-in-Charge.

Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 4.00 Sq mm 1100 volts grade including and 2.50 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and as directed by Engr-in-Charge. Note:- Two run of 4.0 Sqmm cable and one run of 2.50 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 6.00 Sq mm 1100 volts grade including and 4 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and as directed by Engr-in-Charge. Note:- Two run of 6 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down old unserviceable sub main wiring and M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 10 Sq mm 1100 volts grade including and 6 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and as directed by Engr-in-Charge. Note:- Two run of 10 Sqmm cable and one run of 6 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down old unserviceable sub main wiring and M&L for submain wiring with 4 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 6 Sq mm 1100 volts grade and 6 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and as directed by Engr-in-Charge. Note:- Four run of 6 Sqmm cable and one run of 4 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down old unserviceable sub main wiring and M&L for submain wiring with 4 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 10 Sq mm 1100 volts grade and one 10 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC rigid conduit of suitable size complete all as specified and as directed by Engr-in-Charge. Note:- Four run of 10 Sqmm cable and one run of 6 Sqmm cable as earth continuity conductor shall be measured & paid as one unit.

Taking down old unserviceable FTL fitting 36/40Watt and, S & F surface mounting energy saving LED tube light fitting, 1x20W, 230V , high efficiency PMMA diffuser gives soft glare free light with LED tube rod 20 W (White) complete with all accessories. Make : Crompton/Philips/Bajaj/Polycab/Havells

Taking down old unserviceable FTL fitting 36/40Watt and, S & F surface mounting energy efficent LED light fitting, 2 feet , 1x20W, 230V , compact batten with extruded aluminium chanel complete with all accessories. Make : Havells part No LHEXARP71N1W020 or equivalent in Crompton/Philips/Bajaj/Havells

S&F LED Recessed full open 2 x 2 Tile 36 Watt,glare free uniform illumination having white powder coated extruded aluminium body suitable for armstrong and grid ceiling Product code LCTLRN-36-FO-CDL (Polaris I) of Crompton or equivalent in Bajaj/Havells/Crompton/Philips/Polycab

S&F LED Recessed mounted round fixture 18 Watt, with opal diffuser and separate electrinic driver , glare free uniform illumination, slim, compact, auminum die cast edge lit panel suitable for ceiling complete. Product code LHEBADP51Z1W018(OCTANE) of Havells or equivalent in Bajaj/crompton/Polycab/philips

S&F LED wall mounting lights fixture brushed nickel finish fixture with opal glass diffuser suitable with 9 W LED lamp B22 base complete. Product code LHFOSAJE1TZ11060(FLROETINE WL 1LS B22 SS) of Havells or equivalent in Bajaj/crompton/Polycab/ Philips.

S&F LED wall mounting lights fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base complete. Product code LHDL03160099 0(CIty 3 ) of Havells or equivalent in Bajaj/crompton/Polycab/philips

M&L for Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed by Engr-in-Charge.

Excavation in trenches in soft/loose soil not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for ltaking out old cable/laying of under ground cable/foundation of poles/stays including segregation of old serviceable bricks complete all as specified and as directed by Engr-in-Charge.

Returing, filling in, including spreading, leveling watering and well ramming inlayers not exceeding 25 cms thick each layer complete all as specified and as directed by Engr-in-Charge.

Removal of surplus soil to a distance not exceeding 50 mtr away and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-Charge.

M&L for brick protection using old size sub class 'B' bricks, laid flat dry but adjoining to each other laid lengh wise perpendicular to the axis of cable complete all as specified and as directed by Engr-in-Charge.

Supplying, filling in trenches spreading, leveling sand cushioning 8 cm below and 15 cm above the cable for under ground cable complete all as specified and as directed by Engr-in-Charge.

Supply and layng in replacement GI pipe light grade 50 mm bore for cable porotection fixed to poles/along wall/floor/under road/preparation of GI bracket etc across the drain or nallah with clamps. Bolts, nuts & washers etc complete all as specified including taking down the old unsv (clamps. Bolts, nuts & washers shall be measured and paid seperatly) complete all as specified and as directed by Engr-in-Charge.

S&F 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 meter apart including 4 mm suspension wire, one twin core cable flat or round of 10 sqmm cable, complete all as specified and as directed by Engr-in-Charge.

Supply laying, commissioning and testing XLPE insulated armoured heavy duty, electric cable with aluminium stranded conductor for working 1100 Voltage grade size 2 core, 16sqmm including taking out existing unserviceable cable complete all as specified and directed (Earth work, sand cushioning and brick protection shall be measured and paid for separetaly), complete all as specified and as directed by Engr-in-Charge.

All as per item ser No 208 above here in before but 4 core 25 sq mm complete all as specified and as directed by Engr-in-Charge.

All as per item ser No 208 above here in before but 3.5 core 35 sq mm complete all as specified and as directed by Engr-in-Charge.

Gurjit const co

G M BUILDERS 36

kaushal builders