SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF FURNITURE FOR FIRST RENEWAL AT MEDICAL COLLEGE, BHARATPUR

Amount

Non revolving Visitor Chair for professor chamber- Visitor Chair shall be of dimensions (560mm W x 670mm D x 1020 mm H ) Seat & Back Assembly : The seat & back shall be made of 12 mm thick hot-pressed plywood upholstered PU (stylish leather like upholstery) cover & moulded polyurethane foam. The polyurethane foam density shall be of 45+/-2 kg/m3, The back foam shall be designed with contour lumber support for extra cushioning, Under structure shall be of MS elliptical/oblong pipe (40x20x1mm thick) chrome plated frame.

Non revolving Office Chairs - 1. Office chair dimensions shall be ( Seat 572mm * 624 mm * 858 mm, approximately) 2. Seat & Back assembly: The seat & back shall be made of 10 mm thick hot-pressed plywood upholstered PU. Chrome Pipe thickness shall be of 1mm thickness, round under structure shall be made of metal chrome frame 25 mm dia x 1.2mm thickness. The office chair with the PU upholstery should give soft and more comfortable seating to the visitors. The PU upholstery shall also gives the chair its durability with the non-absorbent stain and dirt free features like the PVC. The PU seat and back should also get a long lasting life as it should not get harden or crack. The armrest shall be made of PVC to be fixed over the metal frame to make it more tough and sturdy. The shiny chrome finish shall give it the polished and stylish office chair look.

Cafeteria chair- Shall be Tubular MS chrome plated (DFT 40-50 Microns) legs. Tubular steel frame shall be of a minimum of 19mm diameter, 1.6 mm thickness with leg reinforcement and 12mm thick polymoulded for seat at 450mm H and diameter of seat shall be 400 mm.

Student chair with arm writing pad - Frame &Legs : The frame shall be made out of Diameter 25mm tube of 1.6mm thick, welded by Co2 welding process for uniform surface finish and higher tensile strength. The perforation on the sheet shall be uniform of 2.5mm dimension. Back &Seat : MS perforated sheet of 1.2mm thick with powder coating (DFT 40-50 Microns). Writing desk : Made out of fixed iron/steel metal board The Desk size shall be broader (290mm x 450mm) from the front & tapering (290mm x 100mm) towards the elbow. The MS powder coated hindge shall be of size 100mmW.

Students chair (hostel and reading room ) - Type of Seat and Backrest shall be 18 mm thick prelaminated Particle Board. The Chair shall be Without Arms. The Depth of Seat in mm (+/- 10 mm)400,Height of Seat in mm (+/- 10 mm)460,Width of Seat in mm (+/- 10 mm)400 and the Overall Chair Height in mm (+/- 10 mm)900. The seat and back rest shall be without cushion Cushion. The Width of Backrest (mm) 400 and Height of Backrest (mm)150. The frame material Mild Steel Square Section of outside side minimum 25 mm and wall thickness minimum 1.2 mmand shall have stove enamled paint. There shall be No writing pad.

Non revolving Stool - Stool shall be made of Stainless steel. The dimensions for seat shall be 400mm diameter with 1.6mm thickness. The height shall be 600mm, understructure -Pipe dia shall be 25 mmx1.6mm thickness for 4 legs and middle pipe is made up of dia 50mmx1.6 mm thickness. It should not have height adjustment and revolving mechanism. Bottom support ring shall be made of dia 20mmx1.2mm thickness approx welded with legs. There shall be rubber stoppers on pipes.

Three seater bench - Legs & Armrest shall be SS with 1.2mm thickness. Seat & Back shall be 1.6mm SS perforated sheet . The side bar shall be made up of solid steel 30x12mm with plastic inserts. The cross beam shall be made up of powder coated rectangular MSERW tube having 80x40x2mm (+/-2mm). The sheet shall be assembled on cross beam with the help of M8 bolts (per seat - 8nosi.e seat to bracket & 4nos bracket to cross beam). Overall dimension shall be:- seat height - 410mm & total height 710mm, width& depth as measured from pedestal i.e Width - 1600mm & depth 560mm with Tolerance of +/-0.05%.

Metal Bedwithout mattress - The height of bed shall be 400mm i.e from ground to horizontal frame. The bed shall be raised above the level of horizontal frame at both the head end and tail end. The overall size of 1950 mmL x 915 (w) x915 mm (3 FEET) ( height at head side ) and 525 mm ( height at Tail side ) having mattress panel size of 1905mm (L) x 965mm ( w) x 450 mm ( H) Bed metal frame shall be made from MS/ CRCA steel pipe. Raised head & tail frame consists of 40 mm dia x 1.2mm Thick as leg pipe& 25mm Dia x 1.2mm as supporting pipe3-4 on each side, having curved ends. Rectangular pipe 50 x 25 x 1.6mm as main frame pipe across the length (2 in no)andstiffning pipe (minimum 6nos). The top sheet shall be made 1.6mm thick CRCA sheet having perforation of dia 5 mm with welded to the structure ensuring no sharp edges on top surface OR The commercial ply 12 mm shall be fitted as top sheet but should not bend at any of the area and shall have proper support all around the bed. All metal part shall be powder coated finish DFT -40 - 50 Microns

Podium - The Podium Size shall be 750 mm x550mm x 1100mm ht Shall be made up of 16 mm thick paper laminated MDF board , having 1 nos. PVC cable manager. Shall have input and output cable manager made of PVC The front of podium will be used for engraving the name of respective medical college, which will be told to the L1 bidder.

Metal Almirah with glass doors - The size of metal almirahshall be900mm(W) x 450mm(D) x 2100mm(H). It shall have rigid Knock down construction and Prime Quality CRCA Steel -Top, Back & Side Panels shall be made from 1mm high yield strength CRCA & rest also in 1mm CRCA sheet. Each Door has 6 Lever Cam lock with common key. Each Door has 4/5mm thick transparent glass for clear inside vision secured in a Metal Frame through rubber gasket. Each door shall have plastic side end caps as Handle which shall be for easy to grip, each compartment shall have a storage shelf with Uniformly Distributed Load Capacity per each shelf shall be 40 Kg maximum. The finish shall be Epoxy Polyester Powder coated to the thickness of 50microns (+/-5 micron).

Metal almira -STEEL STORAGE ALMIRAH Providing and placing metal storage. The overall approximate size of the storage shall be 900mm (W) x 450mm (D) x 2000mm (H). The construction shall be knock downconstruction with 1mm thick CRCA for shelf and 1mm thick for back. The door shall be made of 1mm thick CRCA and all other metal component shall be made of 1mm thick CRCA. The locking and handle of the storage shall be mazak handle with three way locking mechanism. The almirah should have 2 welded Legs of 75mm Width and 125mm Height made up of 1mm thick sheet which acts as a understructure of the storage. The shelving shall be height adjustable and shall have a load capacity of 40kg. The product shall be epoxy powder coated to the thickness of 50 microns as per sketch for item.

Filling cabinet - Four Drawer Filling Cabinet shall be of size: 470mm W x 620mm D x 1290mm H (approx), shall be made of MS powder coated CRCA sheet of 0.8 mm thickness completely as per IS standard; Powder coating thickness shall be of 40-60 microns with standard handles and locks Height of each drawer shall be approximately305mm Handles should be concealed. This shall have anti-toppeling mechanism inbuilt to avoid toppling of the cabinet Levellers shall be provided at bottom for height adjustment for 15-20mm on uneven surfaces

Library rack - Double book stacks 900x560x2285 Main unit - Steel with prelaminated particle 18mm thick board on the side and top. The Size shall be - 900W x 560D x 2285H approximately having seven shelves on either side, total shelves 14nos. Shelves are adjustable at every 19mm with and shall be made of 0.8 mm thickness. Each shelf has built in sturdy side rests and a sliding in built book stopper for better care . Powder coated steel parts are considered with thichkness of 40-50 microns

Filing Cabinet - shall be made of dimensions (900mm Wx 400mm Dx 1500mmH shall be made of MS powder coated CRCA sheet of 0.8 mm thickness. The Powder coating shall be of 40-60 microns with standard handles and locks. There shall be 4 equal compartments having glass panel for visibility, the glass shall be of 4mm thick toughened with all edges covered by 30-40mm MS Band of 0.8mm thickness and should have individual lock for each shutter.

Notice board - 1800 mm W X 900 mm D x 25 mm thickness, Wall Mount Pin Board with Four Side Aluminium Frame and fabric covered. There shall be provision of wall hanging across the length and breadth.

Notice board - 900 mm W X 450 mm D x 25 mm thickness, Wall Mount Pin Board with Four Side Aluminium Frame and fabric covered. There shall be provision of wall hanging across the length and breadth.

Cafeteria table - Providing & placing canteen table of Stainless steel grade 202 of size 1800mmW x 900mm D x 750mm H. Understructure to be made up of 40x40x1.6mm thk. Powder coated SS hollow pipes with foot rest at the height of 75mm. Two loop legs with table top frame & added middle horizontal support (along the width in top frame for 1800W). Top & understructure should be welded. Complete base structure to be in welded construction. Provision for levellers should be given for adjusting height if required.

HOD Table: Supplying and fixing standard Cabin table( i) MAIN TABLE SIZE - 1800MM W x 900MM D X 750MM H, (ii) The worktop Will be in single piece made up of prelaminated MDF board. (iii) The worktop shall be made of 36mm thick prelaminated MDF board with 2 mm thick hot melt PVC edge banding (iv) The top is resting on the vertical strips of MDF board of size 750W x 75H. (v) The second table top shall be made up of 25mm the prelaminated MDF board provided with size 500W x 900D. (vi) The modesty of the table is also made up of 18 mm thk. prelaminated MDF board which is attached with the horizontal panels created under second top under main table top. There shall be an standard space for visitor chair in front of modesty panel. (vii) The side panels are also made up of 18mm thick prelaminated MDF board with 2 mm thick hot melt PVC edge banding. ( viii) 3 drawer pedestal shall be provided Size : 450mmW x 450mmD x 685mmH. Top drawer should have a stationary tray made of 18mm thick Pre-laminated MDF board having three drawer configuration, two for personal and one for lateral files. All drawers to be lockable with single key system. The pedestal shall be provided with required number of level adjuster. The colour of table shall be wenge.

Office Table -Providing and placing of Table Sets. MAIN TOP shall be made up of prelaminated MDF board of size: 1500W X 750D x 750H MM; with 2mm PVC Lipping on edges. MODESTY PANEL is made up of 18mm thkprelaminted MDF board of size 1500 X 605 with PVC Lipping on edges. Standard space for visitor chair should be provided. 3 DRAWER pedestal shall be made up of 18mm thk. prelaminted MDF board of size 450X450X680mm with 2mm PVC Lipping on exposed edges. Side panel should be made up of 18mm Thk. prelaminated MDF board of size 750D x 725H.

Computer Table and revolving chair - Providing supplying and placing computer tables with overall dimensions of the table shall be 900mm(W) x 450mm(D) x 750mm(H). The base material for computer table should be prelaminated MDF board with decorative lamination on both sides particle board 18mm thick. The keyboard tray should be provided with telescopic slide . The printer shelf should be provided for keeping books,CPU partition etc. The computer table should be as per photo, sketch, specifications and shall be supplied with the revolving chair which can be accommodated (minus desk) within the table when not in use.

Faculty table - Providing and placing of Faculty Table Sets. MAIN TOP shall be made up of prelaminated MDF board of size: 1800W X 900D x 750H MM; with 2mm PVC Lipping on edges. MODESTY PANEL is made up of 18mm thkprelaminted MDF board of size 1500 X 405 with PVC Lipping on edges. Standard space for visitor chair should be provided. 3 DRAWER pedestal shall be made up of 18mm thk. prelaminted MDF board of size 450X600X725mm with 2mm PVC Lipping on exposed edges. Other end of the table shall be supported with hindge door unit made up of prelaminated MDF board of size 450x600x725mm with 2mm PVC lipping on exposed edges. Keyboard tray of size 900x300x18mm thk. made up of prelaminated MDF board shall also be provided.

Hostel Table - SIZE - 1050W 600D X 750H . Worktop made of commercial ply 18mm thick with 2mm edgebanded, understructure M.S Frame/pipe powder coating square shape 25.25mmx 1.2mm thick, with 2 equal drawer & extra frame support at drawer side. Metal Drawers are made up of 0.8mm thick CRCA sheet with perfect joints by MIG/Spot welding and gringing wherever required, no sharp edges should be there, it is very sturdy as far as stability is concern. The drawers shall be supported with pipe frame on either side as depicted in representative picture.

Table for common room - Meeting Table integrated with MFC + Metal, Metal Tube with Powder coated finish and Anti Rust treatment, cable management is optional, standard spec. applicable.Table Top with 25mm thick MDF board edgebanded with PVC lipping. Size - 1200mm x1200mm x750HT

Medium back chair revolving - MEDIUM BACK CHAIR leatherette chair Providing and placing Mid Back chair. COLOUR BLACK The seat and back shall be made up of 1.2cm.thick hot pressed plywood upholstered with pure leatherette of required color and moulded Polyurethane foam. BACK SIZE: 53.0cm (W) X 73.0cm (H), SEAT SIZE: 54.6cm (W) X 49cm (D). The High Resilience Polyurethane foam is moulded with density=45+/-2 kg/m cube and hardness load 16+/-2 kgf as per IS: 7888 for 25% compression. The seat and back are arrested together with a 9.0cm (W) spine made of 0.8cm thick HR steel. The armrest tube assembly is made of 2.54cm x 0.16cm. M.S. E.R.W. support tubes and Chrome plated. The armrest top is made of ABS & upholstered with foam &leatherette . The pedestal is made of die-cast aluminum with buffing finished. It is fitted with 5nos. twin wheel castors. The pedestal is 67.0cm pitch-center dia (77.0 cm with castor). The twin wheel castors are injection moulded in Black Nylon.

Lockers - Personal Lockers Providing and placing Personal Locker Units in a Set of 12 Lockers. Each Column of 4 lockers Size shall be 380mm (W) x 450mm (D) x 1830mm (H). Each Locker is providing with a Locking facility achieved by 10 Lever cam lock with lock lever. The material of the locker is CRCA 0.8mm Thickness. Total Rigid knockdown construction. Shelf Uniformly Distributed Load Capacity per each shelf level is 35 Kg maximum. Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10).Handle / Label holder: Aesthetically appealing Snap fit ABS plastic handle and plastic label holder for identification. Ventilation: Attractive punched pattern for ventilation.

Lecture theatre boards - Approximate size 5 X 4 feet Shall be made of Green Glass board with stand on which the chalk can be used for teaching

Lecture theatre boards - Approximate size 8x4 feet whiteboard with stand on which one can write with marker pen

Racks- MS Steel racks of size 2100 H x 900 W x 450 mm D having 6 panels made of CRCA steel 1 mm thick , forming 5 comparments . MS angle 40 x 40 x 2 mm th.having slots for adjusting shelves with slot pitch of 18.75 . Appropriate corner plates on all end for stability and Galvanised nut bolts to be used . All angles and Panels will be 7 tank powder coated.

Examination table (without drawer) - The size shall be approximately 912mmx600mmx760mm (LxBxH). The framework shall be made of 25mm square MS pipe 16 gauge. The welding shall be done smoothly by gas welding. The table top shall be made up of 18 mm thick prelaminated particle board exterior grade both side laminated of approved shade.The PVC edging shall be of 0.8 mm all round the edges of top. PVC/hard rubber toes shall be provided at the bottom of legs with steel screws. All steel members shall be painted with 2 coats of synthetic enamel paint over a coat of primer with smoothening the surface

Sofa set 2 seater SOFA SET - Providing and placing of Sofa's with Seat Height of 450mm. Slab stock foam with density 60+/-2Kg/m3 at seats and cushions. Seats and Cushion is also provided with 100% hollow recron fillers for extra comfort. Sofa structure consists of Tropical 12mm ply frame at the bottom on which S-Springs and Tie bars are provided then the complete structure is provided with layers of Non woven fabric, 2 Layers of Slab Stock Foam 80-100mm and finally recron is assembled together to form the final sofa. Seat and Cushions is upholstered with PVC Leatherite (shade should be approved from buyer) upholstery, Spring assembly of 4mm Dia is mounted in understructure for support and additonal cushioning purpose. Legs shall be provided made of Stainless Steel (Grade SS 202). It is a welded assembly made by the combination of Tube and Plate. TOP Cover should be of COTTON ..Not of raxine

Center table glass - CENTRE TABLE - Size- (L)1100mmx(D)600mmx(H)440mm Supplying and placing in position of Waiting Room center table as per photograph. Center Table glass shall be10- 12mm thick toug+B46hened, edge beveled and in rectangular shaped. Another glass attached with chrome plated metal rods with UV welding and using as a bookshelf. The product should be from BIFMA certified company.

MODI FURNITURE UNLIMITED

SRK Modular Furniture Co.

Dynasty Modular Furnitures Pvt Ltd

Daniel Furnitures P Limited