SPL REPAIR TO BUILDING NO P-03 UNDER ZONE-I AREA AT JAIPUR MIL STN

Amount

Taking down cement plaster or cement plaster on brick or stone surfaces of wall etc including raking outs joints, hacking for key scrubbing down with water etc all as specified

M & L Rendering 15 mm thick on stone masonry wall surfaces in CM 1:6 finished even and smooth without using extra cement complete all as directed.

M & L rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement complete all as directed.

M & L Rendering 10 mm thick on ceiling in CM 1:4 finished even and smooth without using extra cement complete all as directed.

Demolition of stone or brick masonry built in cement mortar or cement lime mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as directed.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:4 for raising of height of drain, manhole / wall complete all as specified.

M & L rendering 15mm thick on fair faces of brick work or concrete on wall in CM 1:4 finished even and smooth without using extra cement complete all as directed.

M & L rendering 15mm thick on fair faces of brick work or concrete on wall in CM 1:6 finished even and smooth without using extra cement complete all as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distermper over a coat of birla putty complete all as directed.

M & L preparing new plastered surfaces and applying three coats of oil bound distemper on ceiling over a coat of birla wall care putty complete all as directed.

M & L preparing new plastered surfaces and applying two coats of cement base paint on wall complete all as directed.

M & L complete removal of existing treatment from surface of the walls and applying two coats of cement base paint on wall complete all as directed.

M & L washing, rubbing down and stopping of distempered surface of the walls and applying two coats of oil emulsion distemper over and including chalk whiting on plastered and other services, preparatory to distempering on walls complete all as directed.

M & L for preparation of old plastered or unplastered decorated surfaces and applying two coat of white wash on ceiling complete all as directed.

Dismantling of structural stell work including doors etc complete all as directed.

S & F steel work in tubular trusses (tube, Square, Rectangular etc) including shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters walk ways, railing, frame work of water tanks and similar works conforming to Fe-290, Gde -E- 165 complete all as directed.

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern on roof covering complete all as directed.

S&F pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified

S&F pre- painted galvatume aluminium zinc coating GI based plain as in ridge steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws as specified

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store andrubbish off the premises complete all as directed.

M&L broken stone or boulders for hardcore of gauge not exc 63mm, deposited , spread and levelled in layers not exc 15cm thick watered and rammed to a ture surface complete all as directed.

M & L 100mm thick plain Cement Concrete1:4:8 type D-2 (40mm graded aggregate) in sub base of floors complete all as directed.

M & L 40mm thick plain Cement Concrete1:2:4 type B1 (20mm graded aggregate) in sub base of floors complete all as directed.

Non skid cermic coloured tiles 6 to 7mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match & including laid over 15mm thick screed bed in CM 1:6 complete all as directed.

Glazed cermic coloured tiles in vertical surface 350 x 250 x 7mm / 450 X 350 X 7mm thick set and jointed in neat cement slurry and pigment in white or coloured cement to match the shade of tiles over & including 10mm thick rendering on stone masonary surface or surface other than fair faces of brick work in CM 1:4 complete all as directed.

M&L vitrified ceramic tiles dark shade 10mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thic screed bed in CM 1:6 complete all as directed.

Non skid cermic coloured tiles 7 to 8mm thick joint free (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match & including 15mm thick screed bed in CM 1:6 complete all as directed.

Dismantling asbestos cement ( corrugated , semi corrugated etc ) sheet in roof covering all as specified and directed.

S&F anodised aluminium snap grid frame work for false ceiling all as specified

S&F hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified

M&L 12mm thick perforated particle board/ tiles for insulation and accoustic purposes, 60cm x 60cm in size, fixed with nails to timber frame work or with staples on snap grid. Make : EVEREST or equivalent as approved by GE.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in soft/ loose soil complete all as directed.

M&L for PCC 1:4:8 type D2 in foundations, fillings and mass-concrete

M&L Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as directed.

Removing excavated material exc 250 m but not exc 500 m and deposited where directed at a level n exc 1.5 m above the starting point complete all as directed.

Taking down chowkats or frames with shutters exc 1.50 sqm but n exc 4.00 sqm each (without taking off shutters from the frames) complete all as directed.

Taking down chowkats or frames with shutters not exc 1.50 sqm each (without taking off shutters from the frames) complete all as directed.

Taking down shutters of any description exc 1 sq.m and n not exc 2.00 each complete all as directed.

S & F framed work as in doors or gates of angle or other section as chowkhat or shutters, tie bar, hold fast, guard bars, brackets etc and fixing complete Fe 290 (Gde-E-165) complete all as directed.

S&F galvanised mil steel wire cloth 0.50mm nominal dia of wire and average width of aperature 1.00 mm and fixed with tinned tacks or galvanised wire staples all as specified

S&F 4mm thick figured glass, pin headed type and glazing with rubber packing, beading in square n exc 0.5 Sqm in each pane all as specified

S & F factory made steel ventilator with top hung shutter including hinges, steel peg stay and handle complete all as specified

S & F factory made steel window with side hung shutters factory made including box type hinges with steel handle and steel peg stay complete without glazing bars devetailed or welded incl inserting the hold fast in stone masonry and make good the disturbed masonary complete all as directed.

S & F factory made steel window with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars all as specified

M&L for aluminium powder coated frame for holding of two track sliding shutters fixed type with aluminium section weighing 0.55 Kg/mtr incl necessary joining, cleats glazing clips rubber packing powder coated alumnium snap beading, screws etc and beading for fixing of galvanised wire mess complete all as specified.

M&L for aluminium powder coated frame for fixed type with aluminium section weighing 0.55 Kg/mtr incl necessary joining, cleats glazing clips rubber packing powder coated alumnium snap beading, screws etc and beading for fixing of galvanised wire mess complete all as specified.

M&L for aluminium powder coated door/window shutter openable/sliding type with aluminium section weighing 0.55 Kg/mtr incl necessary joining, cleats glazing clips rubber packing alumnium powder coated snap beading, screws, handle & tower bolt etc complete all as specified.

S&F plain glass 5mm 'thick ordinary quality & glazing in square as required & directed by Engr-in-Charge.

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003 complete all as directed.

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I complete all as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing complete all as directed.

S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F 100 mm mild steel butt hinges medium weight cold rolled complete all as directed.

S&F 150mm anodised aluminium barrel tower bolt of extruded section complete all as directed.

S&F 100mm extruded aluminium anodised alloy handles fabricated type complete all as directed.

S&F mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 300mm length of bolt and fixed complete all as directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with WPC @ 3% weight of cement complete all as specified and directed by Engr-in-Charge. Note:- WPC shall be measured and paid separately).

M&L padding in PCC 12:4 type B-0 ( using 12.5mm size graded stone aggregate) laid to provide a finished slope of 1:30 finished even and smooth without using extra cement all as specified

M & L rendering 15mm thick on concrete surfaces of roof in CM 1:4 finished even and smooth without using extra cement complete all as directed.

The surface shall be painted with one coat of polymeric primer @ 0.30 Kg per sqm, conforming to IS: 3384. A layer of APP based polymeric membrane, 3 mm thick (min), weighing not less than 3.5 Kg/m2 reinforced with polyster non woven fabric ( weighing not less than 150 gms/ Sqm). Application of polymeric membrane shall be by torch application all as per manufacturer instructions. and finally applying one coat of bitumen @ 1.2 kg/sqm on APP membrane before application of aluminium paint complete all as specified and directed by Engr-in-Charge.

M&L preparation of APP based polymeric surface and applying two coat of aluminium paint all as specified & as directed.

S & F 1.25mm thick laths steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete; push pull or manual type complete all as directed.

M&L in repair fancy type SS brackets for curtain rod fixed complete all as directed.

M&L in repair, 20mm dia stainless steel curtain rod fixed complete all as directed.

M&L in repair, fancy type SS caps/ side bulbs for curtain rod fixed complete all as directed.

S&F in repair box type mirror PVC cabinet of size 475 x 600 x 150mm all as specified

M&L of healthy faucet ABS body with 2 mtr SS braided connection pipe. Make : CERA cat No F8030109AB or equivalent as approved by GE

Dismantling CI soil waste pipe 100mm dia including all joints and branch pieces jointed in cement mortar complete all as specified and directed.

All as per item No 69 above but 65 mm dia.

S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as directed.

S & F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as directed.

S&F 75mm PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to walls complete all as directed.

M&L PCC 1:3:6 type C2 concrete bed to drain pipes including packing under and haunching against the side of pipes after they are laid and tested in 110mm bore pipe complete all as directed.

S&F 110mm dia PVC (SWR) bends of any radius complete all as specified and directed.

S&F 75mm dia PVC (SWR) bends of any radius complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as directed.

S&F 63mm PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as directed.

M&L PCC 1:3:6 type C2 ( using 40mm graded stone agg) 75 mm thick as in plinth protection complete all as directed.

M&L plain cement concrete 1:4:8 type D-2 (40mm graded aggregate) in sub base of floors complete all as directed.

M&L chequered cement concrete tiles 20cm x 20cm x 20mm thick , set , jointed and pointed in neat cement slurry in floors with grey cement and pigment over 20mm thick screed bed in CM 1:6 complete all as directed.

M & L Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement laid over and including 25mm thick sand cushion layer complete all as directed.

M & L precast Kerb stone or slabs 150 mm thick (1:2:4) mix type B-1 using 20 mm graded aggregated with plain or interlocking joints as directed complete setting in CM (1:6) complete all as directed.

S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L- type or J- type or cranked hook bolts complete all as directed.

M&L for providing circular, raised platform of height 20cm below the tank and base 15cm more than the external dia of tank of PVC cylindircal water tank of capacity 500 / 1000 litre using PCC 1:3:6 type C-1 using 20mm graded stone aggregate with smooth finish complete all as directed.

Demolition of old existing unserviceable EWC seat and S&F vitreous china wash down water closet pan ( pedestal pattern) white including connections to drain ( or outgoing pipe) and to flushing pipe anti sypohonage pipe etc & with plastic WC seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete. Make : CERA Cat No S1051110 or equivalent as approved by GE.

S & F in repair PVC valveless, syphonic action type flushing cistern 10 liters capacity, low level, white with inlet, ball valve, float and handle incl brackets and flush pipe of polyethylene of low or high density or PVC, 32mm dia suitable for low level cistern. Make : CERA Cat No B1020101 or equivalent as approved by GE.

Demolition of old existing unserviceable WHB glazed and S&F vitreous china wash hand basin white of size 550 x 400mm flat back excluding taps, waste china and plug but including brackets including cutting for and pinning in ends of brackets or erecting stand complete in repair. Make : CERA cat No S2020137 or equivalent as approved by GE.

S&F in repair of CP cast copper alloy bib taps long body with wall flange fancy type of 15mm bore half turn complete all as specified. Make : CERA cat No F2007151 or equivalent as approved by GE.

S&F in repair PVC connection 15mm dia 60cm long with 2 Nos brass check nuts with washer complete all as specified

S & F as in repair angle stop valves cast copper alloy, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions in 15 mm bore fixed. Make : CERA cat No F2007201 or equivalent as approved by GE.

M&L towel rail 450mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats ( minimum weight 170 gms). Make : CERA cat No F5002104 or equivalent as approved by GE.

M&L CP cast copper alloy angle valve two way with wall flange and areator fancy type of 15mm bore quarter turn fixed in repair. Make : CERA cat No F2007211 or equivalent as approved by GE.

M&L CP fancy type centre hole basin mixer 15mm bore cast copper alloy with 450mm copper hose/ braided hose without popup waste system quarter turn complete all as directed. Make : CERA cat No F2007461 or equivalent as approved by GE.

M&L of 15mm brass CP mixer hot & cold water screwed down for iron pipe and fixed. Make : CERA cat No F2007402 or equivalent as approved by GE.

S&F brass chromium plated shower rose 65mm size with swivel joint type including fixing to steel pipe of 15mm bore or union includng taking down of old shower rose of any size ad type. Make : CERA cat No F7020106 or equivalent as approved by GE.

S&F stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm bore or union and fixed

S&F in 700mm x 500mm 5MM thick glass looking mirror with double coat for protection & longevity grounded edges for safety and silver plating on the back for better relection. Make : CERA Cat No B3510112 or equivalent as approved by GE.

S&F soap dish vitreous china white approximate size 160 x 160 x 90mm fixed to plugs with chromium plated (CP) brass screws. Make : CERA Cat No F5006106 or equivalent as approved by GE.

S&F in repair 15mm dia galvanised steel water tubing medium grade with all fittings and fixed complete to walls and celing or laid in floors complete all as directed.

S&F in repair 20mm dia galvanised steel water tubing medium grade with all fittings and fixed complete to walls and celing or laid in floors complete all as directed.

M&L taking down existing treatment of chajja and applying 15mm thick plastering to chajjas in CM 1:3 including making dripping/throating and PCC 1:2:4 for covering making proper slope etc complete at ground/first floor as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10cm girth in stone, concrete block or slab wall.

S&F 1000 ltrs capacity rotational moulded polythylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe etc complete all as specified in SSR Part I, Make - Sintex or equivalent incl dismantling old water tanks.

All as per item No 104 but 2000 ltr capacity.

S & F Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed bore dia of pipe 20mm

M&L Brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in with 1:6 cement mortar.

M&L reinforced cement concrete type B0 1:2:4 (12.5 mm graded aggregate) for slabs supported on walls, chajjas, beams and columns in floors, deck slabs and shelves and like

M&L mild steel TMT bras 10mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire 9Annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M&L mild steel TMT bras 6mm to 8mm dia and over, cut to length, bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire 9Annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

All as per item No 111 but 5mm over upto and including 10mm dia in stirrups, spacers and binders etc.

M&L formwork of suspanded slabs such as roof slabs, floor slabs, landings and similar work not exceeding 20mm thick

Rendering 15mm thick cement plastering in CM 1:4 on other faces on brick masonary (external surfaces)

Rendering 15mm thick cement plastering in CM 1:6 on other faces of brick work (internal surfaces) including finished even and smooth without using extra cement.

Filling under floors including spreading, watering and levelling in layers not exc 25cm thick complete.

S&F mild steel framed work as in doors, gates, steel frames etc of anyle or other section with gusset plates, rails, bracers etc complete of Gde E-165 (Fe- 290) drilled for fixing of steel sheeting or other covering including necessary welding letc and fixing in position complete

M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified.

S&F vitreous china, wash down water closet (EWC) coloured with seat cover, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified. Make : CERA, PARRYWARE or equivalent. Make : CERA Cat No S1051110.

S&F PVC valve less syphonic action type flusing cistern low level with intel ball value float and handle including brackets 10 ltrs capacity. Make : CERA Cat No B1020101 or equivalent as approved by GE.

S&F china wash basin, coloured flat back 550x400mm excluding pillar tap but including waste coupling CP fixing brackets cutting for and pinning in ends of brackets all as specified. Make : CERA cat No S2020137 or equivalent as approved by GE.

S&F 15mm bore chromium plated bib taps (fancy type) long body cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes all as specified. Make : CERA cat No F2007151 or equivalent as approved by GE.

S&F PVC connection 15mm size with PTMT nuts of length 450mm.

S&F 15mm bore dia new galvanised steel water tubing medium grade with all fitting and fixed complete to walls and ceiling or laid in floors.

S&F 500 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I.

S&F for two way bib cock with wall flange and aerator complete all as specified and directed by Engr-in-Charge. Make : CERA Cat No F2007162 or equivalent as approved by GE.

S&F for paper holder with flap guard complete all as specified and directed by Engr-in-Charge. Make : CERA Cat No F5004110 or equivalent as approved by GE.

S&F for towel ring complete all as specified and directed by Engr-in-Charge. Make : CERA Cat No F5004105 or equivalent as approved by GE.

S&F Corner glass shelf (large) of size 300x300mm complete all as specified and directed by Engr-in-Charge. Make : CERA Cat No F5005103 or equivalent as approved by GE.

S&F for Tumbler holder complete all as specified and directed by Engr-in-Charge. Make : CERA Cat No F5006107 or equivalent as approved by GE.

S&F glass shelf complete all as specified and directed by Engr-in-Charge. Make : CERA cat No F5001114 or equivalent as approved by GE.

S&F cutting and making good (with gypsum board) of steel window as per required size for fixing of window AC in each rooms complete all as specified and directed by Engr-in-Charge.

Provn of hole of dia 3" in stone masonary for fixing of pipe of spilt AC in each room complete all as specified and directed by Engr-in-Charge.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-290 (Gde E-165)

M&L providing precast cement concrete (1:2:4) louvers and jallies 25mm thick (measured solid) including all mouldings bur excluding frame & set in CM 1:4 (pre cast nframe shall be measured and paid separately.

M&L providing reinforced cement cocnrete (1:2:4) type B-1 using 20mm graded stone aggregate in precast posts, fencing posts, straining or terminal post, struts etc for fencing average sectional area exc 75 Sqmm and not exc 250 Sqmm with or without chamfered angles and flat splaved rounded or mitred tops as directed.

Taking down flush/pannelled/aluminium door of area exc 1.00 Sqm but n exc 4 Sqm each (without taking out frames) and refixing in same position after carryout necessary repair work complete as directed.

Taking down carefully surface aluminium or copper point wiring from existing recessed PVC conduits (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good disturbed surfaces of walls even and smooth using CM 1:3 as required.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in modular metal flush boxes with modular white cover plate with frame switches, sockets, fan regulators as One light point controlled by one switch.

All as per Item 138 but One Bulb holder point controlled by one switch.

All as per Item 138 but One fan point controlled by one switch.

All as per Item 138 but One bell point controlled by on bell push button

All as per Item 138 but One socket outlet 6 amp controlled by one switch on the same board with other switches.

All as per Item 138 but One socket outlet 6 amp controlled by one switch on indepdendent board.

All as per Item 138 but One exhaust fan controlled by one switch

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in modular metal flush boxes with modular white cover plate with frame for one socket point 16 Amps controlled by one switch on indepdendent board.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanised pressed steel terminated box of thickness not less than 1.2mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches sockets as required for one 16 amp socket outlet point controlled by one switch on independent board.

S&F angle holder, imsulated polycarbonate bolt with back plate complete including 9 watt LED bulb. Make : Anchor Penta PC/Havells Reo/SSK as approved.

S&F switch modular 1 way 6 Amps, 230 volts, 1 module. Make : Legrand Mylink ™ mechanisms, Cat No : 675501 or equivalent as approved by GE.

S&F modular socket 6 Amps, 2/3pin combined 2 module AC 230 volts.Make : Legrand Mylink ™ mechanisms , Cat No 6755 50

S&F modular switch 1 way 16 Amps, 230 volts, 1 module.Make :Legrand Mylink ™ mechanisms, Cat No : 6755 11

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts. Make : Legrand Mylink ™ mechanisms Cat No : 6755 55 or equivalent as approved by GE.

S&F modular fan regulator 120 watts, 2-module AC 230 Volts. Make : Legrand Mylink ™ mechanisms Cat No : 6755 31 or equivalent as approved by GE.

S&F Modular bell push 6A 1 module Make: Legrand Mylink ™ mechanisms Cat No : 6755 04 or equivalent as approved by GE.

S&F bell, AC, 230 volts, single pole. Make : Legrand Cat No : 573443 or equivalent as approved by GE.

M&L for TV wiring copper coated steel rurrent capacity 11A , insulation thickness 6.55 mm solid conductor RG-6 CO-axial PVC in black colour drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories in 32 mm dia conduit and terminated in each TV socket all as directed .

S&F TV socket 1 module.Make: Legrand Mylink ™ mechanisms Cat No : 6755 46 or equivalent as approved by GE.

M&L for telephone wiring HDPE insulated PVC sheated 2 pair x 0.4 Sqmm grey shaded colour insulation thickness 0.65mm stranded conductor , rurrent capacity 15 A , insulation thickness 6.55 mm solid conductor RG-6 CO-axial PVC in black colour drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories in 20 mm dia conduit and terminated in each RJ 11 telephone socket all as directed .

S&F RJ 11 telephone socket 1 module. Make : Legrand Mylink ™ mechanisms Cat No : 675541 or equivalent as approved by GE.

S&F modular whiter cover plate with frame and metal flush box 1/2 module. Make : Legrand Mylink ™ mechanisms Cat No: 6755 61-62 or equivalent as approved by GE.

S&F modular white cover plate with frame and metal flush box 3 module. Make : Legrand Mylink ™ mechanisms Cat No : 6755 63 or equivalent as approved by GE.

S&F modular whiter cover plate with frame and metal flush box 4 module.Make : Legrand Mylink ™ mechanisms Cat No : 6755 64 or equivalent as approved by GE.

S&F modular white cover plate with frame and metal flush box 6 module. Make : Legrand Mylink ™ mechanisms Cat No : 6755 66 or equivalent as approved by GE.

S&F 20 amp, single pole and neutral socket outlet with 2 pole and earthy, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with cchained metal cover for socket outlet with and including one number single pole 'C' series MCB 16 amp as required. Make- Legrand/Hager/Schneider as approved by GE

S&F exhaust fan MS body AC 230 volts of 300mm sweep with standard accessories including providing 04 Nos fasteners 10mmx75mm long in existing wall and making suitable hole in wall complete. Make : Havells, Model : Ventilair DSP or equivalent in Almonard/Standard or equivalent as approved by GE.

S&F in repair LED batten (1.2M) made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2000 lumens/20 watt at a minimum system efficacy of 125 lumen per watt and total power consumption not more than 20 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete. Make : Philips Cat Ref No. WT 202W CLED 20S-6500/40000 PSU L-60 or equivelent in in CG/ Bajaj/Panasonic as approved by GE

S&F water heater of 25 liter capacity BEE star rating 5 in approved color, heating element 2.0 KW temperature setting knob for temperature setting between 25 degree to 75 degree centigrade outer tank made of non metallic engineering plastic, inner tank made of extra thick superior cold rolled steel provided with high density PUF insulation including 15mm bore 450mm long flexible PVC pipe connection for cold water supply and 15mm bore 450mm long chromium plated metallic flexible pipe connection for hot water supply complete. Make : havells Adonia or equivalent in Daspass or Recold or Bajaj as approved.

S&F modular white cover plate with frame and metal flush box 8 module. Make : Legrand Mylink ™ mechanisms Cat No : 6755 67 or equivalent as approved by GE.

S&F ceiling rose 3 plates polycarbonate body complete. Make: Ancher Penta Cat No : 39017 or equivalent as approved by GE.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories size 2X6 sqmm + 1X6 sqmm earth wire in 20 mm dia conduit.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper conductor cable (Phase - Red, Neutral - Black, Earth - Green) drawing into and including concealed rigid non metallic PVC conduit, medium grade, ISI marked ivory colour along with accessories size 4X10sqmm+2X10sqmm earth wire in 32 mm dia conduit.

S&F in repair LED (1.2M) smartbrite extra batten made of CRCA sheet housing with a PC glossy diffuser duly prewired connection having a nominal system lumen output of 2500 lumens/22 watt at a minimum system efficacy of 4000 lumen per 22 watt and total power consumption not more than 40 watt including driver. It has a rated system life time of 25000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD<10% and PF>0.95 complete. Make : Philips Cat Part No : BN 021LED 25S 6500 PSU GR S1 or equivalent as approved by GE.

Taking down carefully by unscrewing from board/soutlet boxes, fittings such as switches, sockets, ceiling rose, lamp holders, brackets, ceiling fittings, bulk head fittings tube light fittings and regulators, etc, for reuse at site or carrying to the store ( To be measured only when found seerviceable in all respect complete for reuse).

Fixing only LED tube light fitting of 20 Watt as taking down as above item Ser No 24 with complete all accessories including connecting up with twin core twisted flexible copper flexible copper conductor cable with suitabale size and making good the same to the match with the existing surface.

Dismantling and taking down distrubution board double door (TPN/SPN) any way/size alongwith MCB of any size /capacity with complete accessories, removing materials keeping in safe custody for reuse at site , refixing the same all as directed where-in-after and making good disturbed surfaces of the same to the match with the existing surface.

S&F LED bulk head fitting 6.5 watt IP 65 & IK 08 with pressure die cast aluminium housing & polycarbonate diffuser duly pre wired connection with 0.75 Sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per Philips Cat Ref No. WT 202W LED 6S PSU NW S2 PC or equivalent as approved by GE.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp. Make - Legrand cat ref no 408587 to 408595 or equivalent as approved by GE.

Supply, installation, testing and commissioning of LT panel board fabricated out of 2mm thick stainless steel (SS 316) with copper bus bar 4 pole equal of capacity in colour code R, Y & B, 100 Amps 415 Volts outdoor type installed on procelain insulators with bus bar chamber. The panel shall be dust and vermin proof, protection class IP 42 class, front opening & compartmental type with approach for cable entry and for easy maintenance duly internally wired with FRLS, PVC insualated stranded copper conductor cable of 1.0 Sqmm including LED indicator for R, Y & B and comprising of the following :- Incoming : (a) On load change over switch 160 AMps 4 Pole AC 415 volts - 01 No. Make : Legrand (b) MCCB 160 Amps 4 pole 25 KA 415 Volts, 70-100%, 50 Hz-01 No. Make : Legrand Outgoing : (a) MCCB 63 Amps 4 pole 25 KA 415 volts Ics=Icu-03 Nos. Make : Legrand (c) Multifunctional digital meter to read the values of Voltage, current, frequency & power factor 415 volts. Make : Legrand

M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised iron strip 32 x 6 mm earth lead by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 40 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work complete.

Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32x6 mm galvanised iron strip

Supply and fixing ceiling fan 1200mm sweep 50 Hz AC 230 volts, 5 star rated in white colour with fan motor, blade set , 0.45 mtr down rod, canopy set, rubber reel including0.5 Sqmm three core PVC insulated flexible copper conductor multistranded wire from fan motor to ceiling and writing MES No on Fan body as required. Make : Havells Model No . ES-50 or equivalent as approved by GE.

Supply & fixing energy meters single phase , 240V AC, 10-60A, Accuracy cl 1.0 with LPR (Zigbee) enabled meters including suitable size of transprant pilfer proof meter Box push fit & hinge type. Make : HPL Cat No : SPPB 152A111000 OC 01 or equivalent as approved by GE.

Schedule of Credit

Lakshmi Enterprises

J.J.ENGINEERING

M/S Mohan Lal Gupta

Satish kumar and company

M/S Dinesh Chandra Mittal

Smita Constructions