Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹26.8 L+₹90,775 (3.51%)Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹30.9 L+₹5.0 L (19.5%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹33.7 L+₹7.8 L (30.1%)Rejected-Finance | L4 | Rejected-Finance HIGHER |
Tender Value
₹40 L
Closing Date
2 May 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar PIN-143001
CERTAIN REPAIR TO CENTRAL INSTITUTE UNDER AGE B/R-I AT AMRITSAR CANTT
2022_MES_516538_1
GE/ASR-02/2022-23
Open Tender
Civil Works
Item Rate
273 days
GE Amritsar
Class D, category ai
8 documents required · 8 mandatory
₹500
GE Amritsar
Exempted
16 Dec 2022
4 Apr 2022
3 May 2022
4 Apr 2022
2 May 2022
19 Apr 2022
60 days
Amount
Material & Labour for preparation of old surfaces (plastered or unplastered) of walls including cornices by brooming down or steel wire brushes, scrapping down smoke soot moulds moss and efflorescent salts, trading oil cut greasy spots and apply one coat of white lime wash on walls complete all as specified and directed by the Engineer in Charge.
Material & Labour for preparation of old surfaces (plastered or unplastered) of Ceiling by brooming down or steel wire brushes, scrapping down smoke soot moulds moss and efflorescent salts, trading oil cut greasy spots and apply one coat of white lime wash on ceiling complete all as specified and directed by the Engineer in Charge.
Material & Labour for preparation of old surfaces (plastered or unplastered) of walls including cornices by brooming down or steel wire brushes, scrapping down smoke soot moulds moss and efflorescent salts, trading oil cut greasy spots and applying one coat of oil bound distemper on walls complete all as specified and directed by the Engineer in Charge.
Material & Labour for for applying 1mm thick birla white wall care putty on walls after preparation of old surfaces by complete removal of exsiting treatment mechanically complete all as specified and directed by the Engineer in Charge.
Material & Labour for applying two coats of oil bound distemper over one coat of primer including preperation of newly plastered/putty surfaces complete all as specified and directed by the Engineer in Charge.
Material & Labour for for preparation of old decorated surfaces plastered or unplastered of walls and applying one coat of cement base paint to walls including cornices etc complete all as specified and directed by the Engineer in Charge.
Material & Labour for preparation of old painted wooden & wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by the Engineer in Charge.
Material & Labour for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by the Engineer in Charge.
Demolition of Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by the Engineer in Charge.
Material & Labour for Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed by the Engineer in Charge.
All as per Srl item No. 10 but except bricks, complete all as specified and directed by the Engineer in Charge.
Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by the Engineer in Charge.
Material & Labour for for rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface and finished the surfaces even and smooth without using extra cement and including applying two coats of oil bound distemper over one coat of alkali resistant priming paint on newly plastered surfaces of wall complete all as specified and directed by the Engineer in Charge.
Material & Labour for for rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface and finished even and smooth without using extra cement and applying two coats of cement base paint over a coat of cement primer on newly plastered surfaces of wall complete all as specified and directed by the Engineer in Charge.
Material & Labour for for rendering 10mm thick in cement mortar 1:3 on fair faces Ceiling surface and finished even and smooth without using extra cement and applying two coats of white lime wash on ceiling complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs Brass Chromium plated Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs vitreous china wash down water closet pan pedestal pattern white including fixing bolts incl white seat cover with flat bottom and cover and mild steel chromium plated hinging device (excluding flushing cistern and flush pipe) complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs vitreous china squatting pan of Orissa pattern size 580mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including making good the dismantled portion to match with existing surface of floor all complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs plastic water closet seat cover white with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs 10 ltrs capacity PVC valveless syphonic action flushing cistern low level with inlet ball valve, flush pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs vitreous china wash hand basin white with flat back type size 550x400mm excluding taps chain and plug and porcelain stopper but including brackets CP waste coupling 32mm and PVC waste pipe 32mm dia including cutting for and pinning ends of brackerts complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs centre hole mixer cast coppre alloy chromium plated with capston head srewed down high pressure with lettered hot or cold with long screwed shanks fly nut screwed for iron pipe 15mm dia complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs PVC connection pipe 15mm dia 600mm long with brass check nut at both ends complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs flushing jet including pipe for Europian type closet including fixing to 15m dia pipe suitable length with brass check nut complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs 600x450mm looking mirror 4mm thick fancy type with teak wood beading all around incl polishing etc complete with all fixing arrangements complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs stop valves brass chromium pltaed 15mm dia with long shank and cup concealed type complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs chromium plated stop valve /Angle valve15mm bore fancy type screwed down for high pressure complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers wate pipe cast iron canti lever bracket ovre all size 915 x 460mm with bowlsize 410x310x160mm complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for in repair stainless steel kitchen plate rack size 900 x 750 x 300mm deep made out of 1mm thick sheet including fitting arrangement completecomplete all as specified and directed by the Engineer in Charge.
Taking up or down 15mm/20mm bore steel tubing and connections , including cleaning for re-fixing or removal of store complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed by the Engineer in Charge.
Refixing only 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors ; connections in new or old position complete all as specified and directed by the Engineer in Charge. Note :- old serviceable GI tubing obtained from Srl item No 31 will be reused after necessary cleaning and with all new fittings.
Refixing only 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors ; connections in new or old position complete all as specified and directed by the Engineer in Charge. Note :- old serviceable GI tubing obtained from Srl item No 31 will be reused after necessary cleaning and with all new fittings.
Supply & Fixing in repairs 100mm dia CP grating with or without hinge type or hole type complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs CP shower rose fancy type with CP arm complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs PVC Mirror cabinet with shelves of best quality including fixing arrangements size 350x450mm complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs PVC coated curtain rods 20mm dia including brackets to hold the rod & a set of ABS finials of approved quality & appropriate qty of ABS plastic rings complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.14 mm complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs glass shelve assembly 60cm in oval shape consisting 5.5mm to 8mm thick glass including CP guard railing with double rail.
Supply & Fixing in repairs CP wall mixer with telephonic shower arrangement and telephonic shower suitable for 15mm dia bore pipe complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for aluminium snake guard strip 30mm thick powder coated with rubber ring to be fixed on bottom of existing door shutters to guard from snakes/frogs complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for glass corner of 30cm radius made of 5.5mm thick sheet galss with CP guard rails fixed to walls with brackets complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for brass chromium plated soap dish fixed with screws to walls complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for toilet paper holder of brass chroumium plated with CP cover complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs pillar taps 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs CP bib tap 15mm dia long body screw high pressure for iron pipe complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs CP bib tap 15mm dia fancy type with crutch or butterfly handles,screwed down, screwed for iron pipe or for brass ferrule high pressure complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for rotational moulded polythene, triple layers, water storage tank 500 Litres capacity, closed top, cylindrical, hoisted and fixed in position , with and including 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod ; including dismantling & taking down the old unserviceable water tanks complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for rotational moulded polythene, triple layers, water storage tank 1000 Litres capacity, closed top, cylindrical, hoisted and fixed in position , with and including 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod ; including dismantling & taking down the old unserviceable water tanks complete all as specified and directed by the Engineer in Charge.
Disconnecting existing water storage tanks exceeding 250 Litres but not exceeding 500 Litres capacity , setting aside (or lowering of required) cleaning, etc. and hoisting if required reconnecting and refixing in position after Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc complete all as specified and directed by the Engineer in Charge.
Disconnecting existing water storage tanks exceeding 500 Litres but not exceeding 1000 Litres capacity , setting aside (or lowering of required) cleaning, etc. and hoisting if required reconnecting and refixing in position after Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc complete all as specified and directed by the Engineer in Charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete all as specified and directed by the Engineer in Charge.
Material & Labour for 20mm thick Granite stone slab (of any type) work (table rubbed and polished) as in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs PVC waste pipe 32mm dia suitable for WHB/Sink complete all as specified and directed by the Engineer in Charge.
Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each complete all as specified and directed by the Engineer in Charge.
Taking down chowkhat with shutters without taking off shutters from frame size of shutters exc. 1.5 but not exceed 4 Sqm each complete all as specified and directed by the Engineer in Charge.
Taking down shutters of any description size of shutter not exc 1 sqm each complete all as specified and directed by the Engineer in Charge.
Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm complete all as specified and directed by the Engineer in Charge.
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each ; and refixing in the same opening complete as directed after easing and adjustment complete all as specified and directed by the Engineer in Charge.
Material & Labour in repairs for 19/20mm thick Block Boards, grade 2 quality , interior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed by the Engineer in Charge.
Material & Labour in repairs 19/20mm thick Prelaminated particle board,exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by the Engineer in Charge.
Material & Labour for external teak wood lipping, 6mm thick to 18/19mm thick block board or prelaminated particle board, fixed with nails including french polish etc complete all as specified and directed by the Engineer in Charge.
Material & Labour for for IInd class hardwood Plain , solid , straight chowkhats and frames , wrought , framed rebated on the solid , rounded or chamfered , put together with glue, pinned at joints, supplied and fixed.
Supply & Fixing for pressed steel frame for doors with one or two rebates size of frame 125mm x 60mm including necessary fixing lungs hinges lock strike plate etc complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 35 mm thick glazed and Skelton door shutters IInd class hard wood open rebated prepared to receive in SSR part-I class 8 (a) glass gage dividing in squares size of member complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain coloure PVC sheet reinforced with M S square tube, suppling & fixing in opening as per specifiaction & drawing complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 30mm thick Glazed and skeleton window shutters of IInd class hard wood , open rebated and prepared to receive glass, gauze, etc. divided in to quares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats
Material & labour for MS Box type steel window double (glazed & gauged) made of ERW tube P- section of size 60 mm x 25 mm double rebated outer frame comprise glazed skelton shutter door frame of ERW tube P-section size 50 mm x 20 mm with two Nos openable leaf cnsisting of two Nos of sash bar of T-sec 20 mm x 3 mm welded to frame with one No vertcale mullion of ERW of ERW box type T-section size of 60 mm x25 mm FI 2 mm thick welded / screwed to frame for fixing of wire guage/glass including fixture and fitting like as handle, tower bolt stopper , cleat, pintal hinges, holdfast primer etc, all as shown on drg No.CEJZ/TD-06/07 and CEJZ/TD/07/07 complete all as specified and directed by the Engineer in Charge.
Material and Labour for MS Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame ( single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass including fixture and fittings like as Stopper, Cleat, Pintal hinges, holdfast etc all as shown on drg No CEJZ/TD1019/08 sheet 1/3 to 3/3 dt 01 May 2008 complete all as specified and directed by the Engineer in Charge. Note :- Guard bars, Sheet glass and painting shall be measured and paid Separately.
Supply & Fixing for Aluminium handles 150mm long, cast type anodised complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for Aluminium anodised barrel tower bolt 150mm long complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm long complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for butt hinges medium weight cold rolled stainless steel of size 100mm complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for MS 300mm long ordinary Helical mild steel stove enameled black door springs including rollers and roller plate complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by the Engineer in Charge.
Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden/metal frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 3mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sq.m. in each pane complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 3mm thick figured glass pin head type, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sq.m. in each pane complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 4mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square exc 0.5 sq.m. in each pane complete all as specified and directed by the Engineer in Charge.
Material & Labour for for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc complete all as specified and directed by the Engineer in Charge.
Material & Labour for for preparation of undecorated wooden surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by the Engineer in Charge.
Material & Labour for for preparation of undecorated steel or iron surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by the Engineer in Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by the Engineer in Charge.
Material & Labour for 6 to 7mm thick glazed ceramic coloured wall tiles 450mm x 300mm on vertical surfaces such as skirting and dados etc (color/Shade of tiles approved by the GE) set and jointed in neat cement slurry and pointed in coloured cement to match , over & including 10mm thick rendering/screed in cement mortar 1:4 complete all as specified and directed by the Engineer in Charge.
Material & Labour for for Non skid ceramic coloured tiles 7 to 8mm thick (Square/reactangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc (color/Shade of tiles approved by the GE), set and jounted in neat cement slurry and pointed in white or coloured cement to match , over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed by the Engineer in Charge.
Material & Labour for for Vitrified tiles, light shade 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed by the Engineer in Charge.
Material & Labour for for Vitrified tiles, light shade 10mm thick (Square/ rectangular) polished, area of each tiles n.exc 0.36 sqm as in vertical surfaces like skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in cement mortar 1:4 complete all as specified and directed by the Engineer in Charge.
Supply and fixing stainless steel rolling drawer pull type suitable for kitchen cabinets with all fixing arrangement area of each drawer n exc 0.30 sqm of vertical face having depth 450mm to 600mm complete all as specified and directed by the Engineer in Charge. Note:- Net area of front finished surface will be measured.
Supply and fixing in repairs 18 mm thick PVC board as in cupboard shelves, in kitchen cabinet etc complete all as specified and directed by the Engineer in Charge.
Supply and fixing in repairs 5 mm thick PVC sheat as in back side of kitchen cabinet etc complete all as specified and directed by the Engineer in Charge.
Supply and fixing in repairs 18 mm thick PVC sheet shutter one side prelaim of any shade as in kitchen cabinet etc complete all as specified and directed by the Engineer in Charge.
Supplying and fixing in repairs 40 mm long hinges self closing type hydrulic type complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs 75 to 80 mm long stainless steel handle complete all as specified and directed by the Engineer in Charge.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and directed by the Engineer in Charge.
Material & Labour for for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection Finishing fair and even complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repairs CP health faucet with 1.5/1.0 metre long pipe complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for UPVC hollow multichamber section polypan of size 200x10mm and average wall thickness of 1mm fixed over PVC fillet sheet at a spacing of n.exc 600mm complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC frame as per specification and drawing complete all as specified and directed by Engineer-In-charge.
Supply & Fixing in repairs 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed by Engineer-In-charge.
Supply & Fixing in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed by the Engineer in Charge.
S/F framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing complete all as specified and directed by the Engineer in Charge.
Material and labour for remove all loose gravel cement mortar, dirt ,oil,grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application. Repair all jointss/pointing with cement mortar 1:3 and cracks with highly elastic bituminious cold applied putty tarplastic->having penetration after setting upto 8mm. Levelling of surface to give proper slopwill be done as per site requirement with shalipatch/equivalent cold applied, Bituminious mortar & cold emulson cum water proofing liquid. Created SSD condition on surface with water prime the surface with acrylic modified Liquid Bitumen Membrane mixed with portable water in the ration of 1:1 and applying @400 gm per sqm ( As per surface condition). Applying first coat of Modified Liquid Bitumen Membrane having elongation 200 % conforming to ASTM -C -412 & having crack bridging of 8mm conforming to ASTM-C836 with tensile straight after 7 days 0.50mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consuption of of 700 gm per sqm. Lay Geotex of 45-50 GSM/Fibre mesh simultaneously and paist it properly with overlap of 50mm. Allow the first coat to dry for 10-12 hrs. Apply 2nd coat on qured first coat with consuption @700 gm per sqm in opposite direction on first coat by brush or roller . Allow it to dry for 10-12 hrs after applying 2nd coat with consuption @700gm per sqm. Ensure final curing time of 36 hrs before allowing /carrying out any furthe work. Conduct ponding test after min 7 days applying two coats of UV Resistand Elastomeric Exteirior Acrylic Weather resistant water proof coating of liquid membrane having elonation of 300% after curing of 14 days conforming to ASTM D-6083- for U V Protection of Bituminious Elastomeric Acry6lic Emulsified Liquid Membrance to give long life and prevent its deterioration from sunlight . Make :- Sika, Fosroc, STP, Dr Fixit, Berger, Asian Paint. Note :- Applivation of water proofing treatement will be done by Authorised Applicator under company supervision . Company authorised applicator will submit authorisation and warranty letter for work done for 05 years as per work procesure adopted as per guidance from campany's side
Demolition of cement Concrete of in sunken floor exceeding 15cm thick (above ground level) and disposing off the rubbish to a distance exceeding 50 mtr but not exceeding 100 mtr away to low lying area complete all as specified and directed by the Engineer in Charge.
Material & Labour for for rendering 10 mm thick on fair faces of brick work or concrete surfaces on walls in cement mortar 1:4. finishing even and smooth without using extra cement with WPC complete all as specified and directed by the Engineer in Charge. Note:- WPC shall be meausred and paid separetly.
Supply only integral water proofing compound.
Material & Labour for for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate 25 mm as in sunken portion finished even and rough complete all as specified and directed by the Engineer in Charge.
Material & Labour for for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete complete all as specified and directed by the Engineer in Charge.
Material & Labour for for applying evenly a tack coat of Industrial bitumen 85/25 at the rate of 1.2 Kg per sqm over 0.30 Kg/Sqm of bituminous primer on roof including cleaning of surfaces complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application over entire roof area with over lapping 100mm to either sides and sealed in complete all as specified and directed by the Engineer in Charge.
Taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories
Supply & Fixing for 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge.
Supply & Fixing for 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge.
Supply & Fixing for 110mm bore PVC (SWR) bends any radius With access door complete all as specified and directed by the Engineer in Charge.
Supply & Fixing for 50mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by the Engineer in Charge.
Supply & Fixing in repair 100mm bore PVC (SWR) gully trap, plain with grating including jointing with solvent cement complete all as specified and directed by the Engineer in Charge.
Material & Labour for reinforced cement concrete M-20 (nominal mix) type B0 using 12.5 mm graded stone aggregate for repair of Chajja, Fascia, parapets etc ; reinforced with & including chicken wiremesh , upto 4 metres height including necessary formwork, scaffolding. And applying two coats of cement base paint over coat of primer over cement plaster 1:4 complete all as specified and directed by the Engineer in Charge.
Material & Labour for reinforced cement concrete M-20 (nominal mix) type B0 using 12.5 mm graded stone aggregate for repair of Chajja, Fascia, parapets etc ; reinforced with & including chicken wiremesh , height exc 4 metres but n.exc 9 metres including necessary formwork, scaffolding. And applying two coats of cement base paint over coat of primer over cement plaster 1:4 complete all as specified and directed by the Engineer in Charge.
m/s. gopal krishan
M/S RASHPAL CONSTRUCTION CO
B.J.CONSTRUCTION CO
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .