18/EUDC (Chowk)/LESA/2025-26

Amount

Safe carriage, loading-unloading with proper stacking of following material from ESC-Daliganj to Work Site/JE -Dump Store -

11 KV 3x185 Sqmm XLPE Cable

LT PVC 1X240/3.5x240 SQ MM CABLE

11/0.4 KV 250 KVA T/F

11KV O/DOOR Jointing Kit 3X120 SQ MM

11 KV ST/TH C/J KIT 3X185 SQ MM

ST POLE 11 MT LONG

11KV POLYMERIC PIN INSULATOR

11 KV Pin With nut

GI Wire 08 SWG

Safe carriage loading unloading with proper stacking of following material from JE dump store to work site.

11 KV 3x185 Sqmm XLPE Cable

LT PVC 1X240/3.5x240 SQ MM CABLE

11/0.4 KV 250 KVA T/F

11KV O/DOOR Jointing Kit 3X120 SQ MM

11 KV ST/TH C/J KIT 3X185 SQ MM

ST POLE 11 MT LONG

11KV POLYMERIC PIN INSULATOR

11 KV Pin With nut

GI Wire 08 SWG

Fabrication & erection of S/S type double pole for 11KV line on 11 M long ST pole with fixing of necessary clamps & other accessories.

S/C Cable laying in Metalic/Damar/normal soil Road by Manual method as per site condition. (All the material required for laying will be supplied by the contractor except 11 KV XLPE cable)

Laying of 3x185 sqmm XLPE Cable by manual method in HDPE Pipe

High Pressure testing of 11 KV XLPE cable. Testing equipment will be arranged by the contractor.

Hoisting of 11KV XLPE cable 3x185 sq mm Single Pole/Double Pole

Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moisture retaining capacity. (Specification of chemical earthing and drawing is hereby enclosed). All material shall by supply by the contractor.

Providing earthing strip size 50x6mm and connecting from earthing pipe/m.s.earting rod to fuse unit/tronsformer body/ neutral earthing(Earthing rod & earthing strip arranged by contractor).

Construction of plinth for 250 KVA Transformer

Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation, commissioning of 250 KVA T/Fs of T/F Plinth and including jumpering with the system (All the required matrial for above job shall be provided by contractor except T/Fs)

Wiremesh Fencing for 250 Kva Transformer

Construction of Distribution Pillar box made of MS Sheet (All the material will be arranged by the contractor).

Hoisting, winding and jumpering of LT cable size 1x240/3.5x240 sqmm between LT distribution box/fuse unit & constructed overhead line with proper lugging and clamaping

Fixing of DO Fuse Set

Construction of pole plinth.

Fixing of earth rod as per norms. (All Materials provided by contractor.)

Grouting of pole

Painting of new erected pole

Supply & fixing of following material

LT Clamp With Nut

HT Connector

Dropper Channel

Top Channel with clamp

AL Lug (240 )

Copper L-Piece

Copper stripe of size 50x50x6 mm

Clamp for Top/T-off/Dropper & S/S B.A

M.S Nut & Bolts Off-Sizes

Henless fuse unit 500 amp 650 volts

Taping of line

Making Heat & shrinkables joints of following sizes and types for 11 KV XLPE cable (Jointing kit will be provided by deptt. )

Indoor/Outdoor end termination kit for 11 KV 3x185 sqmm XLPE cable

11 KV ST/TH C/J KIT 3X185 SQ MM

M/S R P ENTERPRISES (BID ID -5535972)

P.S. ENTERPRISES (BID ID -5539793)