REPAIRS TO ROOF, TOILET, JOINERY AND OTHER MISC B/RWORKSAND INTERNAL ELECTRIFICATION UNDER GE NASIK ROAD CAMP.

Amount

M&L for preparation of old decorated plastered or unplastered surfaces including brooming down moulds & efflorescent salt & trading oil & greasy spots and applying one coat of white wash on walls.

All as per item No 1 Above but on ceiling.

M&L for Complete removal of existing treatment on walls by washing, rubbing down,stopping and applying two coats of oil bound distemper white or tinted on walls over 3 mm thick(average) wall care putty incl primer coat as prepratory to distemper .

All as per item No 3 Above but on ceilling

M&L for preperation of new plastered surface of walls and applying two coats of oil bound distemper white or tinted on walls over 3 mm thick(average) wall care putty incl primer coat as prepratory to distemper .

M&L for preparation of old painted wooden surfaces of any description not other wise described exc. 10 cm width or girth and applying one coat of synthetic enamel paint.

M&L for preparation of old painted steel surfaces of any description not other wise described exc.10 cm width or girth and applying one coat of synthetic enamel paint

M&L for preparation of old surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots; removing nails, making good holes, cracks etc. and applying two coat of exetior emulsion paint (apex / weathercoat) on walls and ceiling plastered or unplastered surfaces .

Cleaning of under ground sewage line of 150 mm bores, between manholes, any depth (including cleaning of manholes) clogged with solid waste/semi liquid mud or sludge by manual rodding or by mechanical means and disposing off the sludge hygeinically as directed by Engr-in-Charge.

Cleaning of under ground sewage line of 200 mm bores, between manholes, any depth (including cleaning of manholes) clogged with solid waste/semi liquid mud or sludge by manual rodding or by mechanical means and disposing off the sludge hygeinically as directed by Engr-in-Charge.

Cleaning of manholes of any size and depth and getting out of sludge, water, effluent etc. and removing all loose sediment, sand sludge, grit, ash etc. and disposing off hygeinically as directed by Engr-in-Charge.

Cleaning of blocked WC, floor trap, nahani trap, WHB any size removing sludge and waste material and disposing off hygeinically as directed by Engr-in-Charge.

Taking down of PVC rain/ vent/ waste pipe any bore.

S&F PVC (SWR) bends, any radius 110 mm bore complete all as specified and directed.

S&F PVC (SWR) branch piece, double (double Y) equal or unequal 110 mm bore with access door all as specified and directed.

S&F PVC (SWR) junction (single 'T') equal or unequal, bore 110 mm with access door, complete all as specified and directed.

S&F PVC (SWR) pipe single socketed 110 mm bore, any in length with rubber ring joints fixed to walls complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc.

Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 using old size bricks.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces finished fair and even.

Repairing of broken edges of RCC chajjas, roof projections, fins, facia and similar works by dismantling of loose and damaged/ disintegrated portion of edges (cross sectional aerea not exceeding 150 sqcm) with cement mortar 1:4 or cement concrete 1:1½:3 type A0 and chicken wire mesh with nails (to hold fresh mortar/concrete) including necessary formwork etc. and scaffolding for work upto four storied buildings and finishing the surface by white wash or cement base paint to match the surface with existing work.

Plastering on walls in cement mortar 1:4 in patches not exc. 3 Sqm on the buildings upto four storied, including taking down old plastering on walls, any description including finishing the surface to match existing surfaces including necessary scaffolding and finishing the surface by white wash or cement base paint to match the surface with existing work.

S&F in repair aluminum anodized windows/doors with necessary accessories/fitting after taking down and refixing after replacement of broken aluminium section, rectification of roller, wiremesh, window panes etc Note : "All items used in rectification shall be paid separately under item No 25-28".

Supply only aluminium anodised frame for doors / windows, ventilators and aluminium section for windows as directed

Supply only rollers for sliding windows including fixing to aluminium windows section after taking down old unserviceable rollers

Supply only stainless steel wire cloth, 0.36mm nominal dia of wire and average width of sperture 1.40mm and fixed with stainless steel wire staples

Supply only sheet glass 4.00mm thick, ordinary quality and glazing n.exc 0.50Sqm in each pane

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) n exc 1.5 sqm each and making good the jambs, soffits of lintels etc. after fixing of new chowkat or frame to match the existing surface.

S&F aluminium (minimum 50 micron powder coated) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.

S&F aluminium (minimum 50 micron powder coated) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.

S&F aluminium (minimum 50 micron powder coated) window and ventilator shutters, side hung/sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays/tower bolt 150mm long (1 No.) hinges type B-21, 100mm long (2 Nos.), suitable handle (1 No.), rollers, grip etc. complete all as specified.

Dismantling wrought iron or mild any description such as steel gate, steel frame works, purlins, rafter, railings, balusters and window guard bars and directed by Engr-in-Charge.

S&F Framed work as in grill, doors or gates of angle or other section with gusset plates, braces, etc, complete, drilled for fixing of steel sheeting or other covering, Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe Grade 290(Gde E-165) complete all as specified and directed by Engr-in-Charge.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5sqm in each pane.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples.

Preparing new untreated steel or iron surfaces over 10cm width or girth and and two coats of synthetic enamel paint over and including a coat of red oxide.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m each and making good the jambs, soffits of lintels etc. after fixing of new chowkat or frame to match the existing surface.

Taking down shutters of any descriptin exc 1 Sqm and n. exc 2 Sqm each.

35mm thick second class hard, wood factory, made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats.

35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides.

Preparing new wood or wood based surfaces over 10cm width or girth and two coats of synthetic enamel paint over and including a coat of pink primer.

Solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification and drawing.

Factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick moulded prelam PVC Sheet on the front face and 2 mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing.

100mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21.

200mm size aluminium anodised, barrel tower bolts of extruded section and fixed.

200mm size aluminium anodised, barrel tower bolts of extruded section and fixed.

300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

M&L light shade vitrified ceramic tiles (Superior quality) 10mm thick (square/rectangular) polished, area of each tiles not exc 0.36 Sqm in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes cement plaster 1:6 complete all as specified and directed

M&L Vitrified Ceramic tiles (Superior quality) 10 mm thick (square/ rectangular) polished in skirting etc. cut out of tiles of area not exceeding 0.36 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including rendering 10mm thick in CM 1:4 as in backing coat on fair surfaces of brick wall

Non - skid coloured ceramic joint free tiles 7 to 8 mm thick (square/rectangular) tiles exceeding 0.06 sqm but not exceeding 0.11 sqm each, in floors etc. laid over and including 15mm thick cement mortar screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match.

Colour Glazed ceramic joint free tiles in vertical surface 350 x 250 x 7mm / 450 X 350 X 7mm thick, laid over and including 10mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match.

M&L for special treatment to sunken portion with 10mm thick plaster in CM 1:4 by using Ditachment DM 1% by weight of cement and surface made smooth after curing period two coat of Ditachment DS shall be applied @2.50 Kg/Sm. The paste like consistancy like is made by using 2.5 Kg of Ditachment DS powder in one litre of admixture (The admixture is made by dissolving 1 part by volume of Nafufill SBR & 4 part by volume of water). After 7 days curing, testing shall be done by flooring for 72 hours. Finally protective plaster coat of 10mm thick in CM 1:4 shall done by using Putz Ditachment 1% by weight of cement over layer of Detachment DS. All joints of CI Pipe, Nahani trap, WC connection etc. shall be filled by mixture of cement, fine sand and 10% Nafufill SBR by weight of cement 32mm dia 450mm long GI Spout light grade shall be provided in all sunken slabs to drain off water

S&F in repair Vitreous China water closet squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests and P trap (excluding flushing cistern and flush pipe) complete including provision of lime concrete bedding.

10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including flush pipe and brackets fixed in repairs.

Vitreous China wash down water closet (pedestal pattern), white including plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete fixed in repairs.

S & F in repair padestal pattern EWC and flush combo, vitreous China white ('Deimos' 92044 of Hindware or equivalent) all as directed as directed.

Vitreous China wash basin white, flat back, size 550 X 400mm, including cutting for and pinning in ends of brackets or erecting stand, with and including 32mm waste fitting brass, chromium plated with long screwed shank and fly-nut, flange end bedded in red lead cement, brass chromium plated bottle trap with inlet and outlet screwed for pipe or connections 32mm bore, including necessary packing, union and cap and fixed in repairs.

Vitreous China urinals, half stall type (back or corner wall type), white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; with and including 5 litres PVC automatic flushing cistern, including brackets, flush pipe, CP urinal spreader, grating union, , union and cap and discharge pipe; fixed in repairs.

Cast iron nahani trap 75mm dia of outlet, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)

Taking up or down steel tubing and connections 15mm bore including bib taps, stop cock etc.

Refixing old steel tubing and connections 15mm bore in new or old position (Walls, ceiling, floors, etc.)

15mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

Taking up or down steel tubing and connections 20mm bore.

Refixing old steel tubing and connections 20mm bore in new or old position (Walls, ceiling, floors, etc.)

20mm bore galvanised steel water tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors.

15mm bore bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair.

S&F in repair hand shower (Health faucet) 1 Mtr PVC tube with wall hook (CP) complete all as specified and directed.

S & F Brass CP wash basin mixer for mixing hot & cold water scrwed down for iron pipe and 15 mm bore fixed in repair.(make : Jaguar and equivalent)

Brass CP ixer for mixing hot and cold water, screwed down for iron pipe 15mm bore and fixed in repairs.(make : Jaguar and equivalent)

15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.

15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repair.

15mm bore stop valves, cast copper alloy, fancy type, chromium plated (angle type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

15mm bore stop valves, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed.

PVC connections 15mm size with PTMT nuts of length 450mm

32mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm including fittings.

Brass chromium plated shower rose 125mm size with swivel joint, including fixing to steel pipe or union 15mm bore.

Sinks made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar.

Granite (of any type) work 17-19mm thick machine cut, (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like laid over and including 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. (Stone slabs so provided shall be not less than 900mm in length)

Dismantling water tanks exc 250 & n exc 500 ltr capacity.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litre capacity, hoisted and fixed in position all as specified.

Dismantling water tanks exc 500 & n exc 1000 ltr capacity.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 litre capacity, hoisted and fixed in position all as specified.

S & F ball valves, 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210gms) fixed in repairs.

S&F in repair stainless steel drapery rod dia not less than 25mm and weight not less than 0.350Kg per RM, complete all as specified and directed.

S & F stainless steel brackets made out of 10mmx2mm for fixing of drapery rod in wall including necessary fixing arrangement and stainless steel screw for holding drapery rod complete all as specified and directed.

S & F stainless steel stud for drapery rod of pattern as approved, suitable for drapery rods of 25 mm dia including screw for fixing complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc ( Note - old serviceable switch/socket/regulator/switch-socket/call bell/bell push shall be reused against apropriate items, all as specified and directed by Engr-in-Charge)

Taking down unserviceable/partly serviceable light fittings any type, tube light fitting and fixtures, etc, and making good to the disturbed surfaces of walls/floor etc to macth with existing surfaces including white washing/colour washing/distempering to match with existing wall/floor/ceiling finishes.(NOTE- old serviceable fitting shall be reused against apropriate items, all as specified and directed by Engr-in-Charge)

Taking down and hanging during point wiring of ceiling fan/exhaust fan of any size and sweep in proper manner and connecting up including provision of cable from ceiling rose or connector to fan all as per specified and directed by Engr-in-Charge

Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sqmm stranded for earth continuity wire, to be drawn in and including, PVC medium grade surface casing capping not less then 20 mm width with MS sheet metal sunken switch/Terminal box 1.2 mm thick and ebonite switch board cover 3.0 mm thick or PVC moulded switch board and brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified . One light point controlled by one, one way switch Note : Cutting chases and making good to match with the adjoining surface shall be included in the unit rate.

All as per Ser item No 95 here in before but , One ceiling /exhaust fan point controlled by one switch and regulator

All as per Ser item No 95 here in before but , One 3 pin 5 amp socket out point on the same board with other switches.

All as per Ser item No 95 here in before but ,One3 pin 5 amps socket out let point on independent board

All as per Ser item No 95 here in before but ,One bell/buzzer point controlled by one bell push.

All as per same in item No 95 above but for one socket outlet 15 amp on independent board with 2.5 Sq. mm cable and 2.5 Sq.mm. earth wire.

S &F in repair Switch piano flush type single pole one way 5 amps.

S &F in repair Socket out let 2 in one, 5/3 pin 5Amp

S &F in repair Switch socket combination 5 Amps 5 pin flush type

S &F in repair Switch socket combination 5 in 1, 5 pin 5/15 Amps flush type universal .

S &F in repair Ceiling rose, surface bakelite 65x50 mm three terminal

S &F in repair Call bell AC-230 Volt single pole ding dong

S &F in repair Bell push, flush type 5 Amps.

S &F in repair Electronic regulator 100/120 Watt step type

Supply and fixing in repair of lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including LED bulb 9 watt.

S & F 20 Watt Batten (4 feet) suitable for LED T8 lamps including coneecting up with 2 core flexible coppper conductor cable and mounting clamps & PVC squre box 75x75mm - 2 Nos etc, all as specified and directed by Engr-in-Charge. Note : The qouoted rate shall be deemed to be inclusive for taking down/up Tube light fitting fitting and refixing after repair with necessory side holders & fixing arrangement.

S & F 20 Watt LED Tube Light (4 feet) suitable for T8 Batten including provision of suitable type of bipin holders- 02 Nos for each fitting, internal wiring of old fitings/fixtures if required, all as specified and directed by Engr-in-Charge

Supply & fix in repairs (PLUTO NEO) LED floodlight made up of pressure die cast aluminium with toughened glass and high power LEDs and secndary lenses with IP66 protection, system efficacy ≥ 110 LPW. option for 3000K. 10KV SPD included and including electically connected complete all as specified and directed. (Make - Crompton Cat Part No-LFLN-200-CDL/60-M, or eqt. of Havells / Luker / Philips / Bajaj) (Note : If found old serviceable flood light fitting will be deposited in MES store yard)

Supply laying & testing cable XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 4 sq. mm 2 core.

Supply & fix in repairs LES 45 watt street light fittings, pressure die cast aluminium housing resistant, toughened glass, IP-66, protection, better optics for uniform distribution aesthetically designed roadway Laminar with excellent thermal magnetic, surge protection device 5KV upto rated power 150W, complete all as specified and directed by Engr-in-Charge.

Supply & fix in repair 2 core, 1100 Volt grade PVC insulated PVC shethed, Aluminium conductor of size 6 sqmm.

Material & labour in repair 75 watt LED profession round strip complete all as specified and directed by Engr-in-Chrge.

Material & labour for LED driver suitable for 75 watt LED strip completed.

Material & labour in repairs surface / recessed mounted linear with its minimalistic shapes Led decorative light fittings complete with electronic driver and fixing arrangments suitable for 2 X 20 watt Retrofit LED Lamp.

Material & labour in repair for non metallic PVC rigid conduit of size 25mm dia complete with all fitting & accessories such as couplers, lock nuts saddles etc.

S&F in repair cable duct ROHS complete and FRLS 45 X 75 mm with cover complete all as specified and directed by Engr-in-Charge.

NOTE : - AMOUNT OF SCHEDULE OF CREDIT RS 37,625.50 WILL BE DEDUCTED FROM TOTAL AMOUNT OF BOQ.

Alpha Construction

Vinod Enterprises

SVT ENGINEERS AND CONTRACTOR.

M/s. SHRI SAINATH ENTERPRISES

SHILPVED

UNITED ENTERPRISES

Vishal Constructions

Bidder Name

Vishal Constructions

M/S SAMEER SUBHASH PATANI

SVT ENGINEERS AND CONTRACTOR.

Alpha Construction

UNITED ENTERPRISES

Vinod Enterprises

SHILPVED

M/s. SHRI SAINATH ENTERPRISES