Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAccepted-Finance BANNOCK BURN T E DARJEELING | DARJEELING | DARJEELING | WEST BENGAL | ₹6.3 L | L1 | Accepted-Finance Quoted Low |
| 2 | L2₹6.4 LRejected-Finance | ₹6.4 L | L2 | Rejected-Finance Quoted High |
| 3 | L3₹6.4 LRejected-Finance 194 METHIBARI SALBARI PO SUKNA PIN 734 009 DIST DARJEELING | DARJEELING | WEST BENGAL | 734009 | ₹6.4 L | L3 | Rejected-Finance Quoted Highest |
Tender Value
₹6.3 L
EMD Value
₹12,515
Closing Date
5 Feb 2026, 3:00 pmClosed
EXECUTIVE ENGINEER
O/o The EE, Powerdepartment, MEED, MIRIK, GTA
ADDITIONAL WORK RELATED TO IPHS 2022 COMPLIANCES AT BUILDINGLESS SHC-HWC(AAM) UNDER PM-ABHIM FOR FY 2025-26 FOR TYPE B BUILDING, AT KHOPRAIL HWC, UNDER MEED, MIRIK, G.T.A. (ELECTRICAL)
2026_GTA_991501_2
GTA/EE/MEED/NIeT-5(SL No I-III)/2025-26
Open Tender
Electrical Work/ Equipment
60 days
MIRIK
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
₹12,515
13 Feb 2026
20 Jan 2026
9 Feb 2026
20 Jan 2026
5 Feb 2026
20 Jan 2026
Supply, installation, and commissioning of a microprocessor/microcontroller-based, networkable, intelligent, analogue addressable single-loop control panel, expandable up to 4 loops. The control panel is designed with ARM Cortex-M4 32-bit Microcontroller with high resolution (480 X 272 pixels) 4.3 inch graphics TFT LCD display with symbolic representation for power status, displays color-coded events (like Red, yellow & Amber ).The system status and control keys with symbolic representation for easy access.The control panel has inbuilt multilingual features (English and Bengali).The panel status shall be visualized on LCD/LED in unambiquese color. The system should support for the 140 Nodes maximum in a Network including Repeater panels & NAC Extender Power supply panels. The total Network Distance shall cover upto 16 Kms for peer to peer network and 1.2 Kms for Repeater & NAC Extender power supply panel network. This panel can operate as a standalone or connect up to 16 panels in a network via Network Interface Card (NIC) for peer to peer networking, Inbuilt USB 2.0 Port for upload and download the panel configuration using the Configuration tool, Two inbuilt programmable inputs, Two inbuilt programmable NAC's with short circuit protection, Programmable 24VDC (Steady/Reset) and Two Programmable Relays, One dedicated Fault Relay, 10000 events log with RTC, Numaric keypad for menu access. The panel should be equipped with sufficient numbers of loop with 20% spare capacity with each loop shall have a capacity of 250 intelligent analog addressable devices in one loop in any combinations including loop powered sounder,sounder-strobe etc. the system has high reliability with the capacity to support 16,000 devices in any combination. The central processing unit shall contain and execute all
Two inbuilt programmable inputs, Two inbuilt programmable NAC's with short circuit protection, Programmable 24VDC (Steady/Reset) and Two Programmable Relays, One dedicated Fault Relay, 10000 events log with RTC, Numaric keypad for menu access. The panel should be equipped with sufficient numbers of loop with 20% spare capacity with each loop shall have a capacity of 250 intelligent analog addressable devices in one loop in any combinations including loop powered sounder,sounder-strobe etc. the system has high reliability with the capacity to support 16,000 devices in any combination. The central processing unit shall contain and execute all
control-by-event (including Boolean functions including but not limited to AND,OR,ANYx and CROSSZONE) programs for specific action to be taken if an alarm condition is detected by the system. The panel shall have a built in power supply and operate 110 / 230VAC + 10% – 15%, 60 / 50 Hz, 450W,The panel shall have its own battery backup of a minium 24 hours in normal run and 5 minitues in the alarm condition. The battery shall be of 24V DC and of sealed maintenance free type, housed inside the panel up to 26Ah, the charger support up to 65AH.The panel construction 18 Gauge CRCA sheet with powder-coated finish, builtin RS485 output avaiable for Networking repeater and NAC extender/Power supply panels. Optional: for BMS integration thru BACnet/MODBUS converter, Graphical Software,TCP/IP Module, IOT module, provision for GSM based Auto dialler, Approval UL 864 -10th Edition or FM. [Make:-Aaral/ Simplex/Ravel/Notifier] [Approved by EIC] [Including 5 Years Comprehensive Warranty]
Supply ,Installation and Commissioning of analog Addressable Multi Sensor - Heat Cum Smoke detector with ROR featues to raise an alarm when the temperature reaches 11.1°per Minute with base, Binary coded address setting DIP switch. Dual LED’s for 360° visibility. Polarity free, Sleek low-profile housing design. Regular 100mm base. IP Rating : IP - 42. Approval: UL or FM. [Make:-Aaral/ Simplex/Ravel/Notifier] [Approved by EIC]
Supply, Installation and Commissioning of analog Addressable Manual Pull Station - Double Action with inbuilt fault isolator, shall be resettable by Key lock access to avoid unauthenticated restorations,FR - ABS Housing, monitoring the field NO/NC devices. Shall have Binary Coding Setting Dip Switch, The MCP shall have operating temperature range from 0°C to 49°C and humidity tolerance range up to 93% RH, Non-Condensing. Complete with termination and testing as per requirement and as per specification. [Make:-Aaral/ Simplex/Ravel/Notifier] [Approved by EIC]
Supply, Installation and Commissioning of Manual Pull station back box (Single Gang Box) compatiable with manual pull station single/dual action equipped with blinking LED for normal condition and steady LED for manual pull station activated condition along with 8 way dip switches for addressing the devices. [Make:-Aaral/ Simplex/Ravel/Notifier] [Approved by EIC]
Supply, Installation and Commissioning of wall mount loop powered sounder - Strobe with builtin isolator fixing box having minimum sound pressure level of 85dBA @3mtr. It shall be RED in colour. Complete with termination and testing as per requirement and as per specification,Material -FR ABS Plastic,Temperature range 0-49deg C , Shall have Binary Coding Setting Dip Switch,Dimensions (100.5 D x 72.25H)mm. Cable wiring for the termination should be at base of sounder and head shall be installed seperately. IP Rating- IP60 [Make:-Aaral/ Simplex/Ravel/Notifier] [Approved by EIC]
Supply ,Installation and Commissioning of armoured 2 C X 1.5 Sq mm FRLS Twisted Pair Tinted copper multistranded cable (Red Color) for Fire Alarm System. Complete with termination and testing as per requirement and as per specification. [Make:-Finolex/ Plaza/Polycab/ RR Cable] [Approved by EIC]
Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. [PWD SOR 2017, Page No.E-11, Item No.1]
2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)
Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment [PWD SOR 2017, Page No.D-9, Item No.11]
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [PWD SOR 2017, Page No.D-6, Item No.7]
10A SP MCB [For FDA Control Panel]
Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works [PWD SOR 2017, Page No.E-3, Item No.10]
240 mm x 200 mm x 65 mm
Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required [PWD SOR 2017, Page No.E-4, Item No.12]
240 mm x 200 mm x 65 mm
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [PWD SOR 2017, Page No.E-5, Item No.14(a).]
Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. [PWD SOR 2017, Page No.E-5, Item No.15(a).]
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [PWD SOR 2017, Page No.F-5, Item No.9]
Supplying and Fixing of Junction boxes, Cable glands, Connector, Screws etc. fixing accessories for SITC of Detectors, MCP and modules.
Supply, Delivery and installation of ABC Powder type fire extinguishers (stored pressure) HSN code-84241000 conforming to IS:15683 and complete in all respect as per direction of EIC [UD&MA SOR M&E Works 2018, Page No.23, Item No.77]
04 Kg with ISI marked Mono Ammonium Phosphate base ABC power conforming to IS:14609 and pressurized with nitrogen gas. Suitable for operating between (-)30ºC to (+)55ºC. Fire rating -1A & 13B
Supply & delivery of 550 Wp or above Mono-PERC/N-Type TOPCON, 144 Half-Cell Monofacial/Bifacial Module with Min. Module Efficiency 21.3%, IEC & BIS Certified (Manufactured in India) with Annual Degradation Not More Than 0.60%. [Manufacturer's Authorization is mandatory]. [Make:- RenewSys/Panasonic/Waaree] [Approved by EIC]
Supply & delivery of Single Phase Off-Grid Inverter with Inbuilt MPPT Charge Controller Size: 2 KVA/24 Vdc. [Manufacturer's Authorization is mandatory]. [Make:- Luminous/Flin Energy/Deye] [Approved by EIC]
Supply & delivery of Module Mounting Structure of HDGI (86 Micron) with Initial Height of 500mm from Roof Level, Withstand Wind Speed of 150 Km/Hr. (Min 56 kg/kW) with All SS304 Fasteners
Supply & delivery of Solar VRLA Gel Maintenance Free 12V-100Ah Battery @50% DOD with Battery Cable & Accessories (5 Years Warranty) [Make:- Exide/Luminous/Amara Raja] [Approved by EIC]
Supply & delivery of DC Solar Cable 1C x 6 Sqmm 1.5 kV Grade XLPO Insulated Tinned Copper (UV Outdoor Cable) [Make:- Polycab/APAR/LAPP] [Approved by EIC]
Supply & delivery of Earthing Cables 1C x 25 Sqmm 1.1 kV Grade PVC Insulated Flexible Copper G/Y [Make:- Polycab/Mescab/KEI] [Approved by EIC]
Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. [PWD SOR 2017, Page No.E-11, Item No.1]
2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)
2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)
Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. [PWD SOR 2017, Page No.D-10, Item No.13]
2+4 way [Enclosure (DHDPSNODRW04)] [Solar Main AC DB]
2+6 way [Enclosure (DHDPSNODRW06)] [Solar AC DB-Gr. & 1st Fl.]
Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection. [PWD SOR 2017, Page No.D-5-6, Item No.6] 32A DP Isolator [For Solar Main AC DB]
[Make:- Havells/Legrand/BCH] [Approved by EIC]
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection [PWD SOR 2017, Page No.D-6, Item No.7] 6-32A SP MCB [Solar AC DB-Gr. & 1st Fl.]
[Make:- Havells/Legrand/BCH] [Approved by EIC]
Supplying and fixing Changeover switch with Sheet Steel enclosure on flat iron frame on wall with nuts bolts etc [PWD SOR 2017, Page No.D-1, Item No.2] 32A 240V DP Changeover Switch
[Make:- Standard/L&T/BCH] [Approved by EIC]
Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works [PWD SOR 2017, Page No.E-3, Item No.10]
150 mm x 100 mm x 65 mm
Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works [PWD SOR 2017, Page No.E-4, Item No.11]
100 mm x 100 mm x 65 mm
Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required [PWD SOR 2017, Page No.E-4, Item No.12]
100 mm x 100 mm x 65 mm
150 mm x 100 mm x 65 mm
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required [PWD SOR 2017, Page No.E-5, Item No.14(a).]
Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. [PWD SOR 2017, Page No.E-5, Item No.15(a).]
Supply & Delivery of 24V DC Battery Cable Set with MCB Configuration
[Make:- Polycab/Mescab/KEI] [Approved by EIC]
Supply & Delivery of AC-DC Integrated Distribution Box with Over Current (PV Fuse 1000V 15A) & Surge Protection (DC & AC SPD Type 2) [Make:- Fender Energy/Earth Energy Solutions] [Approved by EIC]
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:- [PWD SOR 2017, Page No.G-1, Item No.2]
By TATA-Medium GI pipe [AC DB Earthing]
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe [AC DB Earthing] [PWD SOR 2017, Page No.G-2, Item No.3(a).]
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [AC DB Earthing] [PWD SOR 2017, Page No.G-2, Item No.4(a).]
Connecting the equipments body to earth busbar including S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [PWD SOR 2017, Page No.G-3, Item No.5(c).]
Supply and Delivery of 1 x Copper Air Terminal with Mast, 2 x 2m x 17.2mm Copper Bonded Earth Electrode, 2 x Backfill Compound, 2R x 16Sqmm Flexible Copper Earthing Cable, 2 x CI/FRP Pit Chamber Cover Pit at DC Side: 2 Nos.
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, on 1st floor as per relevant IS codes [PWD Civil SOR, V.P. No. 26, Item No.10 (3rd Corri. P-12, It.33)]
M-20 grade with Pakur variety [for fixing of mounting structure on roof slab]
Supply, Delivery and installation of ABC Powder type fire extinguishers (stored pressure) HSN code-84241000 conforming to IS:15683 and complete in all respect as per direction of EIC [UD&MA SOR M&E Works 2018, Page No.23, Item No.77]
04 Kg with ISI marked Mono Ammonium Phosphate base ABC power conforming to IS:14609 and pressurized with nitrogen gas. Suitable for operating between (-)30ºC to (+)55ºC. Fire rating -1A & 13B
Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works [PWD SOR 2017, Page No.E-16, Item No.7]
25mm size
Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. Incl. Al painting of MS support. [PWD SOR 2017, Page No.D-14, Item No.34(a).]
With out angle iron support [150x50x1.25mm (18SWG)]
Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [PWD SOR 2017, Page No.F-5, Item No.9]
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : [PWD SOR 2017, Page No.F-4, Item No.7]
For 2 core:- upto 2.5/4 sqmm
For 1 core:- upto 6 sqmm
upto 25 sqmm
Supply & Delivery of MC4 Connectors, PVC/M.S. Saddles, Bullets, Screws, Fasteners, Ferrule, Cable Tie, Spare Tools, Caution Board, Safety Signage and other Electrical Accessories as required for setting up of solar power plant
Design, Engineering, Installation, Testing, Commissioning & Additional 1 Year of Comprehensive Maintenance Work for Off-grid Rooftop Solar PV Power Plant (2.2 kWp) at Su-Swasthya Kendra (Type-B) @5% of Total estimated cost of Non-scheduled items:- Rs.3,14,852.00
Supply, fitting and fixing including all necessary arrangements for complete installation of Wall mounted Water Purifier having storage Capacity- Not less than 8L, RO+UF+TDS Control + UV InTank + Copper Water Purifier, Purification Production Rate- not less than 15 L/hr with 1 Year Warranty + 3 Years Extended Service Free (including all taxes, Market Rate) [Make- Kent/Aquaguard/LG/Equivalent] (2nos.)
Please Enable Macros to View BoQ information
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 1.02 MB
Tendernotice_2.pdf
PDF • 0.55 MB
BOQ_2424235.xls
BOQ • 0.66 MB
Download all tender documents and submit your bid