SPECIAL REPAIR TO QTR NO 35/4, 37/2, 45/4 AND 47/4 IN NEHRU ENCLAVE AND PROVN OF VEHICLE PARKING SHED IN RV BRANCH OF HQCC AT 26 NEHRU ROAD UNDER GE (EAST) LUCKNOW

Amount

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15 cm thickness below and above ground level, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work old size brick sub class 'B' bricks,straight or curved on plan exc 6 m mean radius, built in in CM (1:6) etc complete all as specified and directed.

M&L for brick work with sub class "B' old size brick straight or curved on plan to any radius in half brick thick built in cement mortar 1:4 etc complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating and including necessary formwork complete all as specified and directed.

M&L for cleaning of all loose dirt and dust from roof surfaces and providing 10 mm thick plastering in CM (1:3) using 100 % coarse sand on roof / parapet walls with WPC @ 2 % by weight of cement or as per manufacture instruction complete all as specified and directed. (Note:- WPC shall be measured and paid seperately as 'Supply Only').

M&L for rendering 15mm thick on brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick work of walls, finished even & smooth without using extra cement etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 2% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement including mouldings, chamfers, splay srounded or coved angles, beads,grooves and rebate upto 10 cm in width or 15 cm in girth complete all as specified and directed. (Note:- WPC shall be measured and paid seperately as 'Supply Only').

M&L for rendering 15 mm thick in CM 1:4 on fair face of brick work of walls, finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound, ISI Marked complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil emulsion distemper (OBD) of approved shade/tint over a coat of primer with 1-2 mm thick wall care puty on wall/ceiling etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistant primer of approved shade/tint complete all as specified and directed.

M&L for complete removal of existing teatment from old plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali primer of approved shade over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying three coats of white wash on wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling & applying two coats of white wash, complete all as specified and directed.

M&L for complete removal of old decorated plastered surfaces of ceilling and applying two coat of white washing on ceilling complete all as specified and directed.

M&L for complete removal of existing treatment including cleaning of motar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and applying two coats of acrylic emulsion paint (exterior grade) of approved shade/tint over and including a coat of 1-2 mm thick wall care putty and a coat of primer on walls/ceiling etc complete all as specified and directed.

M&L for 1-2mm thick of wall care putty over wall/ceiling surfaces etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed.

M&L for virified ceramic tiles double charge/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.

All as per item No. 25 but on vertical surfaces including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floors joints free, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.

M&L for glazed ceramic tiles (coloured) 300x600x7mm thick on vertical surfaces such as dado, skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering in cement & sand mortar 1:4, complete all as specified and directed.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size on vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in plinth protection surface finished fair and even without using extra cement complete all as specified and directed. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exc 3 M in length Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

Demolation of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc complete all as specified and directed.

M&L for granite stone 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20mm thick screed in CM 1:4 including cutting, polishing etc complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L for rendering 15 mm thick wall plaster in CM 1:3 mixed with water proofing compound complete all as specified and directed. (Note :- WPC shall be measured and paid seperately as 'Supply Only').

M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning surfaces as in sunken complete all as specified and directed.

S&F APP based polymeric membrane mimimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric laid on primed surfaced by forced application complete all as specified and directed.

M&L for PCC 1:5:10 type E-2 as in sub base of floor mass filling using 40 mm graded aggregate complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded aggregate using water proofing compound as in sunken floor complete all as specified and directed. (Note:- WPC shall be measured and paid separately 'Supply Only').

M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up/down old water tubes and removing from site complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 20mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up/down old water tubes and removing from site complete all as specified and directed.

M&L for galvanized steel water tubing medium grade of 25mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors including taking up/down old water tubes and removing from site complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern/EWC) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonage pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair vitreous China squatting pan of Orisa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed.

Supply only water closet seat, cover white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed.

S&F in repair PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm with & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug) complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink including 40mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed. Make: Nirali/Neelkanth/Diamond/Jayna.

S&F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

S&F CP grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed.

S&F PTMT grating 100mm dia without waste hole (Minimium weight 40 grams) complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm bore GI/PVC pipe including CP brass nuts on both sides, complete all as specified and directed.

S&F in repair long body 15mm bore bib tap, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15 mm dia chromium plated fancy type angle valve pipe with capstan head long screwed shank including cp cover plate etc complete all as specified and directed.

S&F in repair 15 mm bore CP brass Central Hole Basin mixture fixed to GI pipecomplete all as specified and directed.

S&F in repair 15 mm bore brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe etc complete all as specified and directed.

S&F in repair 15mm bore chromium plated Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified and directed.

S&F in repair hand shower (Health faucet) with 1 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.

S&F in repair CP shop dish fancy type fixed with SS screw on wall etc complete all as specified and directed.

S&F in repair toilet paper holder CP fixed complete all as specified and directed .

S&F in repair PVC bath cabinet with 4 mm thick looking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed.

S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets complete all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed.

S&F in repair 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed.

S&F in repair cast iron floor trap/nahani trap plan with grating of 100 mm size including jointing to waste pipe with cement joints etc complete all as specified and directed.

Disconnecting existing tanks, exc 250 Ltr & not exc 500 Ltr setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required reconnecting and refixing in position (Cleaning repairing, etc measured separately) complete all as specified and directed.

S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks triple layered in white colour (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling old PVC water tank and removing from site complete all as specified and directed.

S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks triple layered in white colour (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc including dismantling old PVC water tank and removing from site complete all as specified and directed.

S&F in repair 20 mm ball valve high pressure of PTMT with apoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F in repair 20mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S&F in repair gun metal gate valve screwed both ends to 15mm bore pipe complete all as specified.

S&F in repair 25 mm dia stainless steel curtain rods including brackets and fancy type end knobs, complete all as specified and directed.

Dismantling of cast iron drain pipe jointed in lead joints or cement joints and taking out of under floors if required complete all as specified and directed.

S&F 100 mm dia cast iron soil waste and vent pipes sand cast in any length with or without laid in wall with cement joints complete all as specified and directed.

S&F 75 mm dia cast iron soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints complete all as specified and directed.

S&F in repair 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and directed.

S&F in repair 75 mm bore cast iron bends with acces door of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and directed.

S&F in repair 75 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and directed.

S&F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F 75 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

M&L for PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) with fittings and area exc 1.5 sqm but not exc 4 sqm each complete all as specified and directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) with fittings and area not exc 1.5 sqm each, complete all as specified and directed.

Taking down shutters exc 1.0 sqm but not exc 2.0 sqm each and refixing in same opening etc complete all as specified and directed.

Dismantling of boarding, any description ,fixed in any position with screws etc complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast, back filling of chowkhat etc complete all as specified and directed.

S&F pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs hinges, locks strike plate etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.

S&F 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides including mechanically pressed factory made 1 mm thick decorative laminate type-1 both sides of surface finish ,colour and pattern approved complete all as specified and directed.

S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.

S&F pwoder coating aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F powder coating aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats glazing clips rubber packing, anodised aluminium sanp beading screw , anodised aluminium fittings such as peg stays 150 mm long (01 Nos) hinges type B-21 100 mm long (2 Nos) suitable handles (1 no) for each shutter complete all as specified and directed.

S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified and directed.

S&F solar control film 25 micron reflective type (gareware sun control or equivalent) complete all as specified and directed.

S&F PVC cabinate shutter as in kitchen with frame including shelves in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet and provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets stainless screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirement and as per make and specification mentioned as per drawing complete all as specified and directed. Note:- Density of PVC solid sheet should not be less than 575 kg/cum. (Make - Centuary ply/Rajshree plastwood/Sintex as approved by GE.)

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F factory made 100% Solid WPC ( Wood Polymer Composite ) - Door Frame 90mm x 45 mm ( Moulded ) Single Rebated made from Wood Polymer Composite ( Single Extruded Process ) material comparising of virgin PVC polymer of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and Natural Fibers ( Wood Powder/ Rice Husk/ Wheat Husk ) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full body treaded star headed srews having minimum frame density of 780 kg/ cbm having good screw holding capacity ( Screw Withdrawal strength of ( Min. 990 N ), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite / borer proof , water / Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, all as per specifications drawings as directed. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. Make : Rajshri Plastiwood or TVL Engineers Pvt Ltd(Brand- Floresta)

S&F factory made 100% solid PVC flush door shutter 28 mm thick, made from Co-Extruded three layer rigid PVC foam sheet ( Single Extruded ) with density not less than 600 kg/cbm outer layer (0.8-1mm) thick should be of rigid PVC with density of not less than 1400 kg/cbm. Both of Surface to be laminated with 0.12MM thick PVC film with suitable adhesive door should be water Proof, Termite Proof, Fire Retardant & having good screw holding capacity complete all as specified and directed. Make : Rajshri Plastiwood or TVL Engineers Pvt Ltd(Brand- Floresta)

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F butt hinges of size 100 mm medium weight, stainless steel ISI marked complete all as specified and directed.

S&F aluminium handle, 150mm size, cast type, anodized (ISI marked) complete all as specified and directed.

S&F 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked) complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.

S&F 150mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F eye door viewer (Magic Eye) of suitable size fixed with panneled door shutter complete all as specified and directed.

S&F in repair 300mm long Stainless steel six peg hanger chromium plated complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including welding work complete all as specified & as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3mm thick figured glass pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane, complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire, staples complete all as specified and directed.

M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over and including a coat of pink primer complete all as specified and directed.

M&L for preparation of new surfaces of steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over and including a coat of red oxide complete all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and directed.

S&F ball catches with 8 mm dia steel ball and brass body and strike plate magnet ball catcher for cup board shutters complete all as specified and directed.

Demolition of reinforced cement concrete in floors, beams, chajjas, landing slab in any position or height and similar suspended works complete all as specified and directed.

M&L for reinforcement cement concrete, desiegn mix M-25 (20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for reinforcement cement concrete, desiegn mix M-25( 20mm graded stone aggregate) columns, pillars, piers, posts and struts complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

Formwork to sides of squire, rectangular or polygonal, rough finished surfaces of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for mild steel TMT bars 05mm dia and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders complete all as specified and directed.

M&L for repairing of RCC projections chajjas, roofs, facia etc by necessary preparation, scrapping, cutting, chiseling, derusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC and providing cement concrete (1:1.5:3) using 12.5 mm graded crushed stone aggregate including necessary form work and reinforced with chicken wire mesh and rendering in CM 1:3 using coarse sand in patches area not exceeding 5 sqm each and thickness of RCC member not exceeding 70mm including applying two coats of finishes as provided to the existing surfaces to match with the existing surfaces in at any height complete all as specified and directed.

S&F in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete all as specified and directed.

S&F 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas complete all as specified and directed.

Dismantling wrought iron mild steel wk of any description not otherwise provided for etc complete all as specified and directed.

S&F 2nd class H/W plain,solid,straight and framed wrought, framed rebated on the solid rounded or completed but together with gue pinned complete all as specified & directed

M&L for 2nd class H/W Plain fillets. square, rectangular or triangular in section, clean sawn, secured with screws or brads exc 6 & not exc 13 sqcm complete all as specified and directed.

S&F in repair stop valves, 15mm dia, cast copper alloy,CP fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed.

S&F in repair 32 mm dia of discharge pipe bottel trap of PTMT having minimum water seal of 25 mm (Minimum weight 32 mm -260 gms/40 mm-270 gms) etc complete all as specified and directed.

S&F in repair long body 15mm bore two-way bib tap, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

M&L for chequred cement concrete tiles 20 cm x 20 cm x 25 mm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM 1:6 complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors; ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290.Gde-E-165 including welding work complete all as specified & as directed.

Surface dressing not exc 15 cm deep in any type of soil complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and not exc 1.5m depth for foundation etc or for shafts, well, cesspits, manholes, peir holes etc not exc 10sqm on plan and getting out in any type of soil complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in foundations, filling and massconcrete complete all as specified and directed.

M&L for 100 mm thick cement concrete1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point complete all as specified and directed.

S&F mild steel roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc of Fe-290 E-165 complete all as specified and directed.

S&F mild steel as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of FE410-W (Gde E-250) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for hardcore broken stone or boulder of gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semicorrugated) sheets in roof covering etc complete all as specified and directed. (Note - Work on slopping roof and height up to 10 mtr approx)

S&F 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, wall fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed. (Note - Work on slopping roof and height up to 10 mtr approx)

S&F asbestos cement one piece plain angular ridge 6 mm thick fixed with L-type or J-type or cranked hook bolts etc complete all as specified and directed. (Note - Work on slopping roof and height up to 10 mtr approx)

Dismantling timber scantling 40 sqcm and over in section, in any position etc complete all as specified and directed.

S&F second class hard wood timber scantling clean sawn fixed for roofs sheets etc complete all as specified and directed.

S&F repair 4 mm thick asbestos cement plain building boards, fixed to timber framework with screw/nails in celing, flat or slopping etc complete all as specified and directed.

S&F 2nd class hard wood plain fillets, square, rectangular or triangular in section,clean sawn, secured with nails or boads not exc 3 sqcm etc all as specified and directed.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of white wash etc complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of oil emulsion distemper (OBD) of approved shade etc complete all as specicified.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistant, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces etc complete all as specified and directed. (Note - Painting on AC inclind roof sheet upto height approx 10 mtrs)

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment,laid over 25mm thick sand cushioning, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including all electrical fittings & fixtures (DBs,submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall complete all as specified and directed.

Taking down carefully electric meter by disconnecting all electric connection and kept at site and refixing the same after completion of wiring including suitable concealed MS box with BL sheet connecting of electric connection complete all as specified and directed.

Taking down & re fixing ceiling fan/exchaust fan after oiling, greasing & painting with two coat of white synthetic enamelled paint complete including connecting of electric connection with FRLS 3 core cable in white colour outer sheath complete all as specified and directed.

Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/fan point controlled by one switch 5Amps SP all as specified and directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.

All as per Item No 168 here in before but for one 5 A socket outlet on independent board.

All as per Item No 168 here in before but for One 5 A socket outlet on same board.

All as per Item No 168 here in before but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor.

S&F switch piano flush type 5 Amps SP, one way complete all as specified and directed.

S&F frame plate with match cover one module plate complete all as specified and directed.

S&F frame plate with match cover two module plate complete all as specified and directed.

S&F frame plate with match cover three module plate complete all as specified and directed.

S&F frame plate with match cover four module plate complete all as specified and directed.

S&F frame plate with match cover six module plate complete all as specified and directed.

S&F frame plate with match cover eight module plate complete all as specified and directed.

S&F terminal box suitable one modular plate of size 75X75x50 mm including cutting, grooving and plastering etc complete all as specified and directed.

S&F terminal box suitable three modular plate of size 100X75x50 mm including cutting, grooving and plastering etc complete all as specified and directed.

S&F terminal box suitable four modular plate of size 128X75x50 mm including cutting, grooving and plastering etc complete all as specified and directed.

S&F terminal box suitable six modular plate of size 210X75x50 mm including cutting, grooving and plastering etc complete all as specified and directed.

S&F terminal box suitable eight modular plate of suitable size including cutting, grooving and plastering etc complete all as specified and directed.

S&F modular switch one way 6A, 230V, AC, 50 HZ, SP one module complete all as specified and directed..

S&F modular switch one way 16A, 230V, AC, 50 HZ, SP one module complete all as specified and directed.

S&F modular socket 2/3 pin combined 6A, 230V, AC, 50 HZ, SP two module complete all as specified and directed.

S&F modular socket 6A/16A 2/3 pin combined 230V, AC, 50 HZ, SP two module complete all as specified and directed.

S&F modular regulator 230V, AC, 50 HZ, SP two module complete all as specified and directed.

S&F modular bell push single pole 1 module6 Amp, 240 volt complete all as specified and directed.

S&F call bell, ding dong / musical AC single phase 230 volts complete all as specified and directed.

S&F MCB DB SPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works complete all as specified and directed.

S&F MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed. Make: Havells

S&F MCB DB TPN 4 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works complete all as specified and directed.

S&F MCCB DB VTPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works complete all as specified and directed. Make: Havells Cat No DHDLVDRWAOFO08 or equivalent in Legrand/ L&T as approved by GE.

S&F MCB SP 230V, 6-32 Amps capacity complete all as specified and directed.

S&F MCB SPN 230V, 6-32 Amps capacity complete all as specified and directed.

S&F MCB TPN 415V, 32 to 63 Amp capacity complete all as specified and directed.

S&F MCB TP 415V, 32 to 63 Amp capacity complete all as specified and directed.

S&F MCCB FP 415V, 100Amp 25K capacity all as specified and directed. Make: Havells

Taking down unserviceable light fitting of any type and capacity complete all as specified and directed.

S&F Lamp Holder(ISI Marked) PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

S&F 9-10W LED bulb complete all as specified and directed.

S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC / Philips cat no TMC 501P1XT-LED22W P 3241

S&F energy saving 10W LED bulkhead luminaire with opal diffuser complete all as specified and directed.

S&F round recess mounted 15W LED flat panel PDC aluminum housing and PMMA diffuser makes it a robust Luminaire complete all as specified and directed.

S&F decorative wall mounted fancy light fitting made up of polycarbonate; sutable for retrofit CFL 15W (Spiral B-22 base) & including one No. retrofit CFL 15W spiral type including LED Bulb complete all as specified.

S&F LED building security light 36W IP 65 including one number MS clamps made of 25X3 mm flat iron with bracket of GI pipe light grade 25mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0.0076 complete all as specified and directed. Make Philips/CG/Bajaj

M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand 2 single core 4 sq mm and one run of 4.0 sq mm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit complete all as specified and directed.

M&L for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces complete all as specified & directed.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB complete all as specified and directed.

M&L for earthing complete with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipe medium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete all as specified and directed.

Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in CM 1:3, and making good, cutting not exc 20 cm girth complete all as specified and directed.

M/S KAUSHIK CONSTRUCTION

M/S AADI ENTERPRISES

rajan construction

R P construction company

M/s Bhadoria Associates

Gaurav Enterprises

M/S SWATI CONSTRUCTION