Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹2.4 LAdmitted-Finance | -37.90% | ₹2.4 L | L1 | Admitted-Finance |
| 2 | L2₹2.5 LAdmitted-Finance | -35.99% | ₹2.5 L | L2 | Admitted-Finance |
| 3 | L3₹2.8 LAdmitted-Finance | -28.11% | ₹2.8 L | L3 | Admitted-Finance |
| 4 | L4₹2.9 LAdmitted-Finance | -24.99% | ₹2.9 L | L4 | Admitted-Finance |
| 5 | L5₹3.0 LAdmitted-Finance | -24.05% | ₹3.0 L | L5 | Admitted-Finance |
Tender Value
₹3.9 L
EMD Value
₹7,840
Closing Date
19 Aug 2026, 6:00 pmClosed
FAYAZ AHMED SHEIKH
EXECUTIVE ENGINEER OFFICE REW RAMBAN
AS PER NIT
2026_RDPR_320422_16
NIT NO 13.1 OF REW RAMBAN 2026 27 BLOCK GANDHRI INDER HEAD PRI/DDC/BDC/APDP/ABDP
Open Tender
Civil Works
Percentage
45 days
RAMBAN
AS PER NIT
2 documents required · 2 mandatory
₹600
Rural Development and Panchayati Raj
₹7,840
27 Aug 2026
11 Aug 2026
20 Aug 2026
11 Aug 2026
19 Aug 2026
11 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing hard PVC wall/ceiling panelling of approved make and colour, consisting of rigid PVC panels of approved thickness and width, fixed over an aluminium/GI/wooden framework with screws, clips and accessories, including all joints, corner trims, edge beading, cutting, fitting and finishing complete in all respects. As per direction of engineer incharge; | - | sqm | 925.5 | - |
| 2 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge Ist class kail wood 35mm thick | - | sqm | 3,168.5 | - |
| 3 | Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked | - | sqm | 1,340.7 | - |
| 4 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge Ist class kail wood 35mm thick | - | sqm | 3,168.5 | - |
| 5 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) 4 mm thick glass pane (weighing not less than 10 kg/sqm) including providing putty | - | sqm | 1,985.85 | - |
| 6 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 1st class kail wood 35mm | 1 | sqm | 3,797.4 | ₹3,793.6 |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete .Size of tile 600x600 mm | 1 | sqm | 1,409.9 | ₹1,408.49 |
| 8 | Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 250x16 mm | - | Each | 229 | - |
| 9 | Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100x10 mm | - | Each | 63.35 | - |
| 10 | Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 125 mm | - | Each | 68 | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.07 MB
BOQ_1065398.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].